HPC-7180 1U Rackmount Server Chassis for EATX Server board with 8 x 2.5" Hot-swap Drive Bays and 1 FH/FL PCI-E x16 Expansion Slot Features NEW 1U rackmount server chassis supports ATX/CEB/EATX motherboard Eight hot swap 2.5" SAS/SATA/SSD drive bays Support 1U single and redundant power supply Easy swap and anti-vibration FAN design Specifications Form Factor Support Expansion Slots Drive Bay Cooling System Monitoring Front I/O Interface Miscellaneous Slim ODD Bay 5.25" (front-accessible) 3.5" (hot-swappable) 3.5" (internal) 2.5" (hot-swappable) 2.5" (internal) Chassis Fan Air Filter Chassis intrusion switch USB 2.0 PS/2 LED Indicators Rear Panel Environment Physical Characteristics Temperature Humidity Dimensions (W x H x D) 1U chassis support for max. motherboard size - 12" x 13" EATX PCIe x16 Full Height / Full Length x1 1 (ODD should be purchased separately) 8 x SATA III / SAS 6Gb/s 5 (4 cm / 26.5 CFM) 1 System : Power, LAN1, LAN2 HDD Tray: HDD Power and Activity LED Operating Non-Operating 0 ~ 40° C (32 ~ 104° F) -40 ~ 70° C (-40 ~ 158° F) 10 ~ 85% @ 40° C non-condensing 10 ~ 95% @ 40° C, non-condensing 597 x 430 x 43.5 mm (23.5" x 16.9" x 1.7") Pre-configured Systems All product specifications are subject to change without notice Last updated : 19-Sep-2012 HPC-7180 Dimensions Unit: mm 654 43.5 620 597 629 430 465 482 Ordering Information Part Number HPC-7180-00A1E 1757004188-01 Front View Description 1U HPC chassis without Power supply (1+1) 100-240V 650W 1U redundant power supply One USB 2.0 System Contents Items Hot-Swap 2.5" HDD tray (Pre-install) 1U PCIe x16 to PCIe x16 Riser Card (Pre-install) Accessory Box (2.5" HDD Screws; Slime ODD Backplane) 1U Rail Kit Quantity 8 1 1 1 Power Switch, Reset Switch, LAN1/LAN2 LED, PWR LED ODD Dummy Cover Rear View Optional Accessories Part Number 96CB-SAS-SATA-4P1 19Z0000406T000 Each bay has HDD PWR LED, Activity LED Description Mini-SAS Cable kit for add-on SAS RAID card* 1U IO Shield for ASMB-781/820/920/782 *Note: When using add-on RAID Card with Mini-SAS connector(s), purchasing 96CB-SAS-SATA-4P1 cable is a MUST. Single port RAID Card needs 1 piece and dual port needs 2 piece. Support both of single and redundant power supply Online Download www.advantech.com/products One FH/FL expansion slots