AKM AK2922H

[AK2922H]
AK2922H
Zero Drift operational amplifiers
Feature
AK2922H is the dual channel CMOS operational amplifires which is available to output with very low input offset
voltage (± 1.0V) and near zero input offset dirft.
It’s operated with very small current consumptions, 1.05mA typ./ch (VDD:5.0V), which is available to operate full
swing signals in output.
AK2922H is appropriated to Sensor Pre Amp. applications.
 Low Voltage, Single Supply Operation : 2.7V to 5.5V
 Very Low Input Offset Voltage : ± 1.0V typ.
 Near Zero Dirft over time and temperature : ± 2.0nV/C typ.
 Full Swing Outputs to 10k Load
 Power Supply Current : 1.05mA typ./ch (VDD: 5.0V, No Load)
 Gain Bandwidth : 4MHz typ.
 Operationg Temperature Range : -40 to 125C
 Package : MSOP8
Part Name
AK2922H
Channel Number
2
Package
MSOP8
Pin Location
1:OUTA
2:NINA
8:VDD
A
7:OUTB
B
3:PINA
4:VSS
6:NINB
5:PINB
MSOP8
（AK2922H）
MS1504-E-00
2013/02
-1-
[AK2922H]
Pin Function Descriptions
Pin number
1
2
3
4
5
6
7
8
Note 1)
PWR
AI
AO
Name
OUTA
NINA
PINA
VSS
PINB
NINB
OUTB
VDD
I/O (Note 1
AO
AI
AI
PWR
AI
AI
AO
PWR
Function
Amplifier A Output
Amplifier A Inverted Input
Amplifier A No Inverted Input
Power Supply Ground
Amplifier B No Inverted Input
Amplifier B Inverted Input
Amplifier B Output
Positive Power Supply
: Power Supply
: Analog Input
: Analog Output
Absolute Maximum Ratings
Parameter
Supply Voltage
Input Voltage
Input Current
Storage Temperature Range
Symbol
VDD
VTD
IIN
Tstg
Min
-0.3
-0.3
-10
-55
Max
6.5
VDD + 0.3
+10
150
VSS=0V (Note 2
Units
V
V
mA
C
Note 2) All voltage with respect to ground
WARNING :
Operational at or beyond these limits may result in permanent damage to the device. Normal operation is not
guaranteed at these extremes.
Recommended Operating Conditions
Parameter
Operationg Temperature Range
Supply Voltage
Symbol
Ta
VDD
Min.
-40
2.7
Typ.
Max.
125
5.5
Units
C
V
Conditions
*We asuumes no responsibility for the usage beyond the conditions in this datasheet.
MS1504-E-00
2013/02
-2-
[AK2922H]
Electrical Characteristics
 DC Characteristics
Parameter
Min.
Input Voltage Offset
Input Voltage Offset Drift
Input Bias Current
Input Common Mode Range
00
Output Voltage Swing
0.05
Common Mode Rejection Ratio
100
Power Supply Rejection Ratio
100
Large Signal Voltage Gain
100
Short Circuit Current
Output Current
Power Supply Current
Note 3) It does not contain output drive current.
VDD:5V, Ta:-40 to 125C, unless otherwise noted
Max.
Units
Conditions
± 10
V @Gain > 60dB
± 20
nV/C @Gain > 60dB
pA Ta=25C
VDD-0.2
V
VDD-0.05
V RL 10k connected to VDD/2
dB
dB
dB RL 10k connected to VDD/2
mA
mA
2.1
mA/ch VDD=5.0V,No Load (Note 3
Typ.
±1
±2
± 50
130
130
130
± 50
± 25
1.05
 AC Characteristics
Parameter
Gain Bandwidth
Slew Rate
Input Voltage Noise
0.1 – 10Hz
0.1 – 1Hz
Overload Recovery Time
Input Capacitance Differential
Common Mode
Maximum Capacitance Loads
Min.
Typ.
4
5
25
0.9
0.3
0.02
1.5
12
MS1504-E-00
VDD:5V, Ta:-40 to 125C, unless otherwise noted
Max. Units
Conditions
MHz
V/s
nVrms @f:1kHz
/√Hz
Vpp
Vpp
msec Av: -50V/V
pF
PF
150
pF Inverter : 0dB and more
Non-inverter : 6dB and more
(Do not use Voltage-Follower
circuit)
2013/02
-3-
[AK2922H]
Package
Voltage noise density [nV/√Hz]
1. Marking
1.1 TMSOP8
8
7
6
5
(1) Pin Number 1 indication mark
(2) Part Number
(3) Date Code (Year)
(4) Date Code (Month)
(5) In-house Control Code
22H
(2)
YMA
(1)
(3) (4) (5)
1
2
3
4
2. Outline Dimensions
2.1 MSOP8 Package Outline
(UNIT:mm)
0.127 +0.1
-0.05
0.55±0.2
2.8
4.0±0.1
2.9 +0.12
-0.1
0.6MAX
1.1±0.08
1
0.65
+0.1
0.1 -0.05
0~10°
0.1
0.2 +0.05
-0.03
0.1 M
MS1504-E-00
2013/02
-4-
[AK2922H]
IMPORTANT NOTICE
 These products and their specifications are subject to change without notice.
When you consider any use or application of these products, please make inquiries the sales office of
Asahi Kasei Microdevices Corporation (AKM) or authorized distributors as to current status of
the products.
 Descriptions of external circuits, application circuits, software and other related information contained
in this document are provided only to illustrate the operation and application examples of
the semiconductor products. You are fully responsible for the incorporation of these external
circuits, application circuits, software and other related information in the design of your
equipments. AKM assumes no responsibility for any losses incurred by you or third parties arising from
the use of these information herein. AKM assumes no liability for infringement of any patent,
intellectual property, or other rights in the application or use of such information contained herein.
 Any export of these products, or devices or systems containing them, may require an export license or
other official approval under the law and regulations of the country of export pertaining to customs
and tariffs, currency exchange, or strategic materials.
 AKM products are neither intended nor authorized for use as critical componentsNote1) in any safety,
life support, or other hazard related device or systemNote2), and AKM assumes no responsibility for
such use, except for the use approved with the express written consent by Representative Director of
AKM. As used here:
Note1) A critical component is one whose failure to function or perform may reasonably be expected to
result, whether directly or indirectly, in the loss of the safety or effectiveness of the device or system
containing it, and which must therefore meet very high standards of performance and reliability.
Note2) A hazard related device or system is one designed or intended for life support or maintenance of
safety or for applications in medicine, aerospace, nuclear energy, or other fields, in which its failure to
function or perform may reasonably be expected to result in loss of life or in significant injury or damage to
person or property.
 It is the responsibility of the buyer or distributor of AKM products, who distributes, disposes of, or
otherwise places the product with a third party, to notify such third party in advance of the above
content and conditions, and the buyer or distributor agrees to assume any and all responsibility and
liability for and hold AKM harmless from any and all claims arising from the use of said product in
the absence of such notification.
MS1504-E-00
2013/02
-5-