AOZ8025 6-Line EMI Filter with Integrated ESD Protection General Description Features The AOZ8025 is a 6-line device integrating EMI filtering with ESD protection for each line. It is designed to suppress unwanted EMI/RFI signals and provide electrostatic discharge (ESD) protection in portable electronic equipment. This state-of-the-art device utilizes AOS leading edge Trench Vertical Structure [TVS]2 ™ technology for superior clamping performance and filter attenuation over the full operating display range. The AOZ8025 has been optimized for protection of color LCD displays and CCD camera lines in cellular phones and other portable consumer electronic devices. z 6 lines for EMI filtering and ESD protection: The AOZ8025 consists of six identical circuits comprised of TVS diodes for ESD protection, and a resistor–capacitor network for EMI/RFI filtering. A series resistor value of 100Ω and a capacitance value of 9pF are used to achieve -20dB minimum attenuation from 1.0GHz to 3.0GHz. The TVS diodes provide effective suppression of ESD voltages in excess of ±20kV (contact discharge) and ±20kV (air discharge). This exceeds IEC 61000-4-2, level 4 ESD immunity test. – Exceeds IEC 61000-4-2, level 4 (ESD) immunity test – ±20kV (contact discharge) and ±20kV (air discharge) z Trench Vertical Structure [TVS]2 ™ based technology used to achieve excellent ESD clamping and filter performance over the full operating display range z Filter performance: -20db attenuation from 1.0GHz to 3.0GHz z Low operating voltage: 5.0V z Capacitance stability over wide range of voltages and temperatures z DFN package: 3.0mm x1.35mm z Pb-Free device Applications z EMI filtering and ESD protection for data lines z LCD displays, camera interface, I/O interface z Portable handheld devices, cell phones, PDA phones The AOZ8025 comes in an RoHS compliant, 3.0mm x 1.35mm DFN package and is rated over a -40°C to +85°C ambient temperature range. Electrical Schematic D0 100Ω CH1 9pF 9pF 100Ω D1 D5 CH2 9pF LCD/Camera Module 9pF 100Ω CH6 9pF 9pF Figure 1. Rev. 1.1 September 2010 www.aosmd.com Page 1 of 8 AOZ8025 Ordering Information Part Number Ambient Temperature Range Package Environmental AOZ8025DI -40°C to +85°C DFN-12 RoHS Compliant Green Product AOS Green Products use reduced levels of Halogens, and are also RoHS compliant. Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information. Pin Configuration 1 12 2 11 3 3 10 4 4 9 5 8 6 7 1 11 2 10 9 8 Exposed Pad (GND) 12 5 6 7 DFN-12 (Bottom View) Top View Pin Description Pin Number Pin Name Pin Function 1,12 CH 1 Channel 1 Connections 2, 11 CH 2 Channel 2 Connections 3, 10 CH 3 Channel 3 Connections 4, 9 CH 4 Channel 4 Connections 5, 8 CH 5 Channel 5 Connections 6, 7 CH 6 Channel 6 Connections Exposed Pad GND Common Ground Connection Rev. 1.1 September 2010 www.aosmd.com Page 2 of 8 AOZ8025 Absolute Maximum Ratings Exceeding the Absolute Maximum ratings may damage the device. Parameter Rating Storage Temperature (TS) -65°C to +150°C ESD Rating per IEC61000-4-2, contact ESD Rating per IEC61000-4-2, air (1) ±20kV (1) ±20kV ESD Rating per Human Body Model(2) ±30kV Notes: 1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330Ω. 2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5kΩ. Electrical Characteristics TA = 25°C unless otherwise specified. Symbol VRWM VBR IR VCL RCH CCH fC Parameter Reverse Working Voltage Conditions Max. Units 5.0 V 8 V 0.1 µA ILOAD = 1A, positive ILOAD = 1A, negative clamp(5)(8) 7.0 -3.0 V ILOAD = 5A, positive clamp(5)(8) ILOAD = 5A, negative clamp(5)(8) 8.0 -8.0 ILOAD = 12A, positive clamp(5)(8) ILOAD = 12A, negative clamp(5)(8) 10.0 -10.0 1mA(4) Reverse Breakdown Voltage IT = Reverse Leakage Current VRWM = 3.3V Signal Clamp Voltage Total Series Resistance Min. Typ. (3) 6 7 clamp(5)(8) IR = 20mA Ground(6)(7)(8) 90 100 110 Ω 8 9 10 pF Channel Capacitance Input to Cut-off Frequency Measured with 50Ω source and 50Ω load termination 250 MHz Attenuation from 1.0GHz to 3.0GHz VR = 0V Measured with 50Ω source and 50Ω load termination -20 dB Notes: 3. The working peak reverse voltage, VRWM, should be equal to or greater than the DC or continuous peak operating voltage level. 4. VBR is measured at the pulse test current IT. 5. Measurements performed using a 100ns Transmission Line Pulse (TLP) system. 6. Total capacitance is equal to 2 x CCH. 7. Measured at 25°C, VR = 2.5V, f = 1.0MHz. 8. Guaranteed by design. Rev. 1.1 September 2010 www.aosmd.com Page 3 of 8 AOZ8025 Typical Performance Characteristics Insertion Loss Characteristics Analog Crosstalk 0 0 -5 -10 -20 -20 S21 (db) S21 (db) -15 -25 -30 -40 -60 -35 -40 -80 -45 -50 1 10 100 1000 -100 10000 1 10 100 Frequency (MHz) 10000 Frequency (MHz) Forward Voltage vs. Forward Current Clamping Voltage vs. Peak Pulse Current 11 12 10 10 Forward Voltage (V) Clamping Voltage, Vcl (V) 1000 9 8 8 6 4 7 2 6 0 2 4 6 8 10 0 12 2 4 6 8 10 12 Forward Current (A) Peak Pulse Current, Ipp (A) Typical Resistance vs. Temperature 110 Resistance (Ω) 105 100 95 90 -45 -25 -5 5 25 45 65 85 Temparature (°C) Rev. 1.1 September 2010 www.aosmd.com Page 4 of 8 AOZ8025 Package Dimensions, DFN 3.0 x 1.35, 12L 0.15 C D D1 F E CL B Pin 1 Marking L 0.15 C 12 7 8 9 10 11 12 6 5 4 3 2 1 E1 1 e A CL Pin 1 ID (C0.2x45°) b BOTTOM VIEW TOP VIEW 0.10 C A 0.08 C SIDE VIEW A1 A3 C RECOMMENDED LAND PATTERN 2.20 0.35 0.20 Dimensions in millimeters Symbols A A1 A3 b Min. 0.45 0.00 Nom. Max. 0.50 0.55 0.02 0.05 0.152 REF 0.20 0.25 0.30 D D1 E E1 e 2.90 2.10 1.25 0.20 3.00 2.20 1.35 0.30 0.50 BSC L F 0.20 0.30 0.40 0.20 REF 3.10 2.30 1.45 0.40 Dimensions in inches Symbols A A1 A3 b Min. 0.018 0.000 Nom. Max. 0.020 0.022 0.001 0.002 0.006 REF 0.008 0.010 0.012 D D1 E E1 e 0.114 0.083 0.049 0.008 0.118 0.122 0.087 0.091 0.053 0.057 0.012 0.016 0.020 BSC L F 0.008 0.012 0.016 0.008 REF 1.10 0.30 0.20 0.50 0.25 UNIT: mm Notes: 1. All dimensions are in millimeters. Angles is degree. 2. Coplanarity applies to the exposed pad as well as the terminals. Coplanarity shall not exceed 0.08mm. 3. Warpage shall not exceed 0.10mm. 4. Package length/package width are not considered as special characteristic. 5. Refer JEDEC MO-229. 6. Marking is for package orientation reference only. Rev. 1.1 September 2010 www.aosmd.com Page 5 of 8 AOZ8025 Tape and Dimensions, DFN 3.0 x 1.35, 12L Carrier Tape P2 A-A K0 E1 A D0 P1 D1 R0.20 Max. E2 B0 T A0 P0 R0.25 Typ. E A Feeding Direction Unit: mm Package DFN 3x1.35 A0 1.60 ±0.10 B0 K0 3.25 0.80 ±0.10 ±0.10 D0 ø1.5 +0.1/-0.0 D1 ø1.00 Min. E E1 8.0 1.75 +0.3/-0.1 ±0.10 E2 3.50 ±0.05 P0 4.00 ±0.10 P1 4.00 ±0.10 P2 2.00 ±0.05 T 0.30 ±0.05 W1 Reel S K M N G R H W Tape Size Reel Size 8mm ø178 M ø178.0 ±1.0 N ø60.0 ±1.0 W 11.80 +0.5 W1 9.0 ±0.5 H ø13.0 +0.5/-0.2 S 2.40 ±0.10 K 10.25 ±0.2 G ø9.8 R — Leader / Trailer & Orientation Trailer Tape 300mm min. or 75 empty pockets Rev. 1.1 September 2010 Components Tape Orientation in Pocket www.aosmd.com Leader Tape 500mm min. or 125 empty pockets Page 6 of 8 AOZ8025 Package Marking AOZ8025DI (DFN-12) 32V Part Number Code Underscore Denotes Green Product Rev. 1.1 September 2010 Assembly Location Code Week & Year Code www.aosmd.com Page 7 of 8 AOZ8025 Revision History Revision Rev. 1.0 Revised Item Initial release Alpha & Omega Semiconductor reserves the right to make changes to this data sheet at any time without notice. LIFE SUPPORT POLICY ALPHA & OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. Rev. 1.1 September 2010 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.aosmd.com Page 8 of 8