VOLTAGE CONTROLLED TEMPERATURE COMPENSATED SMD CRYSTAL OSCILLATOR ASTX-11, ASVTX-11 Pb RoHS Compliant FEATURES: • 3.2 x 2.5 x 0.9mm miniature package • Low current consumption 1.5mA for 19.68MHz • Vc function corresponds to PLL circuits • Suitable for RoHS reflow profile 3 .2 X 2 .5 X 0 .9m m | | | | | | | | | | | | | | | APPLICATIONS: • Cellular and cordless phones • Standard OSC for exact equipment • Mobile com munication equipment • Porta ble radio equipment and music player. • PLL STANDARD SPECIFICATIONS: Parameters Minimum Frequency Range Standard Frequencies: Operating Temperature: Storage Temperature: Frequency Stability ∆f/f0 vs Tolerance (@+25°C) at shipping: Tolerance (@+25°C) after reflow: Temperature (ref. to +25°C): Supply Voltage Change (Vdd±5%): Load Change (ZL±10%): Supply Voltage (Vdd): Aging (first year @+25°C): Supply Current (Icc): Voltage Control Function (for ASVTX-11) Control Voltage (Vcc): Frequency Tuning Range: Frequency Tuning Transition: Input Impedance: Typical Maximum Units 10 ----40 10, 13, 14.4, 16.3676, 19.2, 19.8, 20, 24.5535, 26, 33.6, 38.4, 39, 40 -30 ----+75 -40 ----+85 MHz -0.5 -1.5 -2.5 -0.2 ----------------- +0.5 +1.5 +2.5 +0.2 ppm ppm -0.2 +3.135 -1.0 ------------- ----+3.3 ----------------- +0.2 +3.465 +1.0 1.5 2.0 2.5 +0.5 ±8 Positive 500 +1.5 Notes MHz °C °C See option (Tabel 1) V ppm mA mA mA +2.5 See option ~19.68MHz ~32.00MHz ~40.00MHz Vdc ppm 650 kΩ Ou t put Voltage: Load: Waveform: Phase Noise: 0.8 Vp-p 10kΩ//10pF Clipped Sine Wave -135 dBc @1kHz OPTIONS & PART IDENTIFICATION: (Left blank if standard) ASVTX-11 or ASTX-11 Vdd (V) Blank: 3.3V±5% A: 3.0V±5% B: 2.8V±5% C: 2.5V±5% - MHz - Packaging Blank: Bulk T: 1000pcs/reel T3: 3000pcs/reel Frequency in MHz Please specify the frequency in MHz. e.g. 19.200MHz Table 1: Frequency Stability vs Operating Temperature ±2ppm ±2.5ppm ±3ppm 0°C ~ +50°C D20 D25 D30 -10°C ~ +60°C E20 E25 E30 -20°C ~ +70°C F20 F25 F30 -30°C ~ +70°C G20 G25 G30 -30°C ~ +85°C H20 Std.(Blank) H30 -40°C ~ +85°C I20 I25 I30 ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED - ±4ppm D40 E40 F40 G40 H40 I40 ±5ppm D50 E50 F50 G50 H50 I50 Revised: 07.27.11-K Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com VOLTAGE CONTROLLED TEMPERATURE COMPENSATED SMD CRYSTAL OSCILLATOR ASTX-11, ASVTX-11 Pb RoHS Compliant 3 .2 X 2 .5 X 0 .9m m | | | | | | | | | | | | | | | OUTLINE DRAWING: Note 1: It is not recommended that paths go underneath the oscillator. If needed, please use multi-layer PCB board or resist coating. Dimensions: Inches (mm) TAPE & REEL: Note 2: Recommend using an approximately 0.01μF bypass capacitor between Pin 3 and 6. Pin 1 2 3 4 5 6 Function ASVTX-11 ASTX-11 Vcc GND N.C. GND Output N.C. Vdd REFLOW PROFILE: T: 1000pcs/reel T3: 3000pcs/reel Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED CE RTIFIED Revised: 07.27.11-K Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com