AVAGO AVSP-1104

Vortex Gearbox™ AVSP-1104
10:4 Gearbox 100G Ethernet/OTN PHY IC
for Backplane, Portside and Cable
Product Brief
Introduction
The first product of Avago's Vortex GearboxTM family, the AVSP-1104 offers data center, enterprise and OTN switch and
router manufacturers the longest reach solution for both backplane and portside applications. A 100G Ethernet PHY
IC, the device features Avago's proven 28 nm CMOS SerDes technology, including Avago's unique Decision Feedback
Equalization (DFE) architecture, providing low overall power consumption, low data latency, and best-in-class jitter and
crosstalk performance.
To integrate hundreds of high-speed SerDes channels in a single ASIC, Avago has maintained a focus on minimizing
power while increasing data rates. Hence, the AVSP-1104 enables power-efficient 100G optical modules to increase
connection speeds from 10 Gbps to 100 Gbps for high performance and high bandwidth switching, routing and blade
server applications. All SerDes within the AVSP-1104 operate at any frequency (hole-free): four from 1 Gbps to 28 Gbps,
and ten from 1 Gbps to 15 Gbps. The latter perform full duplex conversion of ten lanes at 10/11 Gbps to four lanes of
25/28 Gbps. An additional six 15G transceivers can be accessed to use the AVSP-1104 in a 10:10 full duplex retimer mode.
The device supports the following standards:
• IEEE CAUI
• CEI 11G-SR and CEI 28G-VSR
• CEI 25G-LR
10x10G
4x25G
Switch
Fabric
Or ASIC
Backplane
or Cable
10x10G
4x25G
Vortex Gearbox™
Vortex Gearbox™
10:4 Gearbox
10:4 Gearbox
AVSP-1104
Figure 1. Typical 10:4 Gearbox Application Diagram
AVSP-1104
Switch
Fabric
Or ASIC
10x10G
10x10G
Switch
Fabric
Or ASIC
Backplane
or Cable
10x10G
10x10G
Vortex Gearbox™
Vortex Gearbox™
10:10 Retimer
10:10 Retimer
AVSP-1104
AVSP-1104
Switch
Fabric
Or ASIC
Figure 2. Typical 10:10 Channel Repeater Application Diagram
Vortex Gearbox™ SerDes Tx/Rx Performance
• Long reach performance, withstanding up to 32 dB of channel loss
• Hole-free operation from 1 – 28 Gbps
• Gearbox functionality for full-duplex conversion of four lanes (4×25 Gbps, 4×28 Gbps) to ten lanes (10×10 Gbps,
10×11 Gbps). Option for configuration as a retimer function for full-duplex transmission of ten lanes
• Programmable Tx/Rx equalization of all SerDes interfaces
• Easy-to-use diagnostic software for remote debugging
Figure 3. CEI 28G-VSR Compliant Eye
Figure 4. CEI 25G-LR Compliant Eye
For product information and a complete list of distributors, please go to our web site:
www.avagoresponsecenter.com/678
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved.
AV02-3354EN - December 10, 2012