AZ10/100EP16VS www.azmicrotek.com LVPECL Differential Receiver with Variable Output Swing FEATURES DESCRIPTION • The AZ10/100EP16VS is a Silicon Germanium (SiGe) differential receiver with variable output swing. The AZ10/100EP16VS has functionality and output transition times similar to the AZ10/100EP16, with an input that controls the amplitude of the Q/Q ¯ outputs. • • The AZ10/100EP16VS is functionally equivalent to the ON Semi MC100EP16VS BLOCK DIAGRAM Silicon-Germanium for highspeed operation 150ps typical propagation delay Available in a 3.0x3.0mm MLP package APPLICATIONS • Interfacing with very high frequency sources PACKAGE AVAILABILITY • • • Order Number MSOP8 MLP16 Green/RoHS Compliant/Pb-Free Package Marking AZ10EP16VSTG MSOP8 AZTPEP16VS2 AZ100EP16VSTG1 MSOP8 AZHPGEP16VS2 AZ10/100EP16VSLG1 MSOP16 AZMG16S2 1 1 Tape & Reel - Add 'R1' at end of order number for 7in (1k parts), 'R2' (2.5k) for 13in 2 See www.azmicrotek.com for date code format www.azmicrotek.com +1-480-962-5881 Request a Sample 1630 S Stapley Dr, Suite 127 Mesa, AZ 85204 USA May 2012, Rev 2.0 Arizona Microtek, Inc. AZ10/100EP16VS ECL/PECL Differential Receiver with Variable Output Swing PIN DESCRIPTION AND CONFIGURATION Table 1 - Pin Description Pin 1 2 Name VCTRL D Type Input Input Function Output Swing Control Data Input 3 D Input Data Input 4 VREF Output Reference Voltage Output 5 VEE Power Negative Supply 6 Q Output Data Output 7 8 Q VCC Output Power Data Output Positive Supply VCTRL 1 D NC NC NC VCC 16 15 14 13 8 VCC 7 2 Q VCTRL 1 12 NC D 2 11 Q Q MLP16 MSOP8 D 6 3 5 VREF 4 Q VEE D 3 10 VREF 4 8 5 6 7 8 NC 100k VEE 10k BOOST Figure 1 - Pin Configuration for MSOP8 and MLP16 NOTES FOR MLP16 PACKAGE: 10K/100K Selection - Connect pin 10K to VEE and float (NC) pin 100K to select 10K operation. Connect pin 100K to VEE and float (NC) pin 10K to select 100K operation. Variable Swing Selection - Connect pin BOOST to VEE to support variable swing operation. Float (NC) pins, BOOST and VCTRL to disable variable swing operation. All VEE connections must be less than 1Ω. www.azmicrotek.com +1-480-962-5881 Request a Sample 2 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ10/100EP16VS ECL/PECL Differential Receiver with Variable Output Swing ENGINEERING NOTES Connecting the BOOST pin to VEE increases the output swing by about 15% above standard ECL/PECL levels. The BOOST pin is internally tied to VEE for the MSOP8 package, and is under external user control for the MLP16 package. When both the BOOST pin and the VCTRL pin are not connected, the part operates with the standard ECL/PECL output and VBB levels of the AZ10/100EP16 device. To ensure best performance, the BOOST pin should be tied to VEE when the variable swing feature is used. The operational range of the AZ10/100EP16VS control input, VCTRL, is from VREF (full swing) to VCC (min. swing). Maximum swing is achieved by leaving the VCTRL pin open or tied to VEE. Simple control of the output swing can be obtained by a variable resistor between the VREF and VCC pins, with the wiper driving VCTRL. Typical application circuits and results are shown in Figures below. The AZ10/100EP16VS provides a VREF (VBB/VREF) output for a DC bias when AC coupling to the device. The VREF pin should be used only as a bias for the AZ10/100EP16VS as its current sink/source capability is limited. Whenever used, the VREF pin should be bypassed to ground via a 0.01µF capacitor. Under open input conditions for D/D ¯ , the Q/Q ¯ outputs are not guaranteed. NOTE: Specifications in ECL/PECL tables are valid when thermal equilibrium is established. Typical Large Signal Performance, AZ100EP16VS* 1000 900 800 V CT RL=V CC-2.0V V CT RL=V CC-1.5V VOUTpp (mV) 700 600 500 V CT RL=V CC-1.0V 400 300 V CT RL=V CC-0.5V 200 100 V CT RL=V CC 0 0 1000 2000 3000 4000 5000 6000 FREQUENCY (MHz) Figure 2 - AZ10/100EP16VS Large Signal Performance *Measured using a 750mV differential input source at 50% duty cycle. Valid for MSOP8 or MLP16 with BOOST = VEE www.azmicrotek.com +1-480-962-5881 Request a Sample 3 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ10/100EP16VS ECL/PECL Differential Receiver with Variable Output Swing Typical AZ100EP16VS Voltage Output Swing at +25C, Nominal Supply 100 1.240 V (100K ECL) VSWING (% pk-pk differential) 75 %OUT 100K ECL 50 25 0 0.0 0.4 0.8 1.2 1.6 VCTRL (V) (BOOST tied to VEE for MLP 16, or MSSOP 8 Package) Figure 3 - Typical AZ10/100EP16VS Voltage Output Swing at nominal conditions Figure 1: Voltage Source Implementation VCC VCTRL D VSWING Q (pk-pk) D Q 50 VEE -2V - 3.3V Figure 2: Alternative Implementation 1k VCTRL 50 + 3.3V VCC D Q VSWING (pk-pk) D Q VREF VEE 240 240 Figure 4 Typical applications www.azmicrotek.com +1-480-962-5881 Request a Sample 4 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ10/100EP16VS ECL/PECL Differential Receiver with Variable Output Swing PERFORMANCE DATA Table 2 – Absolute Maximum Ratings Absolute Maximum Ratings are those values beyond which device life may be impaired. Symbol Characteristic Condition Rating Unit VCC PECL Power Supply VEE = 0V 0 to +4.5 V VI PECL Input Voltage VEE = 0V 0 to +4.5 V VEE ECL Power Supply VCC = 0V -4.5 to 0 V VI ECL Input Voltage VCC = 0V -4.5 to 0 V IOUT Output Current Continuous 50 Surge 100 TA Operating Temperature Range -40 to +85 °C TSTG Storage Temperature Range -65 to +150 °C ESDHBM Human Body Model 2500 V ESDMM Machine Model 200 V ESDCDM Charged Device Model 2500 V mA Table 3 - 10K ECL DC Characteristics 10K ECL DC Characteristics (VEE = -3.0V to -3.6V, VCC = GND) Symbol -40 °C Characteristic Min Output HIGH Voltage1 VOH Output LOW Voltage VOL Output LOW Voltage1,2 VCRTL = VCC. BOOST =VEE Output LOW Voltage1,3 VOL VCRTL = NC. BOOST =NC Reference Voltage2 VREF BOOST=VEE Reference Voltage3 VREF BOOST=NC IIH Max Min -1095 -845 -2000 Typ 25 °C Max Min -1055 -805 -1700 -2000 -1285 -1035 -1950 Typ Unit Max Min -1030 -780 -970 -720 mV -1690 -2000 -1690 -2000 -1655 mV -1270 -1020 -1265 -1015 -1255 -1005 mV -1650 -1950 -1630 -1950 -1630 -1950 -1595 mV -1700 -1500 -1670 -1470 -1650 -1450 -1600 -1400 mV -1430 -1300 -1380 -1270 -1350 -1250 -1310 -1190 mV 80 V 400 µA Input HIGH Current - D 80 VCTRL 400 IIL Input LOW Current 0.5 IEE Power Supply Current 21 80 0.5 400 0.5 27 36 80 0.5 400 0.5 22 28 37 1 Each output is terminated through a 50Ω resistor to VCC -2V 2 BOOST is internally bonded to VEE for the MSOP8 packages 3 Supported in MLP16 package only www.azmicrotek.com +1-480-962-5881 Request a Sample Typ 85 °C Max 1,2 VCRTL = VREF. BOOST =VEE VOL Typ 0 °C 22 0.5 µA 0.5 29 38 24 30 40 mA 5 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ10/100EP16VS ECL/PECL Differential Receiver with Variable Output Swing Table 4 – 10K PECL DC Characteristics 10K LVPECL DC Characteristics (VEE = GND, VCC = +3.3V) Symbol -40 °C Characteristic Min Output HIGH Voltage1,2 VOH Output LOW Voltage1,2,3 VOL VCRTL = VREF. BOOST =VEE Output LOW Voltage1,2,3 VOL VCRTL = VCC. BOOST =VEE Output LOW Voltage1,3,4 VOL VCRTL = NC. BOOST =NC Reference Voltage3 VREF BOOST=VEE Reference Voltage4 VREF BOOST=NC IIH Typ 0 °C Max Min 2205 2455 1300 Max Min 2245 2495 1600 1300 2015 2265 1350 2270 2520 2330 2580 mV 1610 1300 1610 1300 1645 mV 2030 2280 2035 2285 2045 2295 mV 1650 1350 1670 1350 1670 1350 1670 mV 1600 1800 1630 1830 1650 1850 1700 1900 mV 1870 2000 1920 2030 1950 2050 1990 2110 mV 80 µA 400 µA VCTRL 400 IIL Input LOW Current 0.5 IEE Power Supply Current 21 80 0.5 400 0.5 27 36 80 0.5 400 0.5 22 28 37 Typ 22 0.5 Max µA 0.5 29 38 24 30 1 For supply voltages other than 3.3V, use the ECL table values and add supply voltage value 2 Each output is terminated through a 50Ω resistor to VCC -2V 3 BOOST is internally bonded to VEE for the MSOP8 packages 4 Supported in MLP16 package only www.azmicrotek.com +1-480-962-5881 Request a Sample Unit Min 80 Typ 85 °C Max Input HIGH Current - D Typ 25 °C 40 mA 6 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ10/100EP16VS ECL/PECL Differential Receiver with Variable Output Swing Table 5 – 100K ECL DC Characteristics 100K ECL DC Characteristics (VEE = -3.0V to -3.6V, VCC = GND) Symbol -40 °C Characteristic Min Output HIGH Voltage1 VOH Output LOW Voltage VOL Output LOW Voltage1,2 VCRTL = VCC. BOOST =VEE Output LOW Voltage1,3 VOL VCRTL = NC. BOOST =NC Reference Voltage2 VREF BOOST=VEE Reference Voltage3 VREF BOOST=NC IIH Max Min -1130 -840 -1950 Typ 25 °C Max Min -1090 -840 -1700 -1950 -1200 -940 -1900 Typ Unit Max Min -1090 -840 -1090 -840 mV -1700 -1950 -1700 -1950 -1700 mV -1190 -940 -1190 -940 -1190 -940 mV -1640 -1890 -1640 -1890 -1640 -1890 -1640 mV -1650 -1450 -1650 -1450 -1650 -1450 -1650 -1450 mV -1440 -1320 -1380 -1260 -1380 -1260 -1380 -1260 mV 80 µA 400 µA Input HIGH Current - D 80 VCTRL 400 IIL Input LOW Current 0.5 IEE Power Supply Current 20 0.5 400 0.5 26 35 -1550 80 80 0.5 400 0.5 21 27 36 1 Each output is terminated through a 50Ω resistor to VCC -2V 2 BOOST is internally bonded to VEE for the MSOP8 packages 3 Supported in MLP16 package only www.azmicrotek.com +1-480-962-5881 Request a Sample Typ 85 °C Max 1,2 VCRTL = VREF. BOOST =VEE VOL Typ 0 °C 22 0.5 µA 0.5 28 38 25 31 41 mA 7 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ10/100EP16VS ECL/PECL Differential Receiver with Variable Output Swing Table 6 - 100K PECL DC Characteristics 100K LVPECL DC Characteristics (VEE = GND, VCC = +3.3V) Symbol -40 °C Characteristic Min Output HIGH Voltage1,2 VOH Output LOW Voltage1,2,3 VOL VCRTL = VREF. BOOST =VEE Output LOW Voltage1,2,3 VOL VCRTL = VCC. BOOST =VEE Output LOW Voltage1,3,4 VOL VCRTL = NC. BOOST =NC Reference Voltage3 VREF BOOST=VEE Reference Voltage4 VREF BOOST=NC IIH Typ 0 °C Max Min 2170 2460 1350 Max Min 2210 2460 1600 1350 2100 2360 1410 2210 2460 2210 2460 mV 1600 1350 1600 1350 1600 mV 2110 2360 2110 2360 2110 23660 mV 1660 1410 1660 1410 1660 1410 1660 mV 1650 1850 1650 1850 1650 1850 1650 1850 mV 1860 1980 1920 2040 1920 2040 1920 2040 mV 80 µA 400 µA VCTRL 400 IIL Input LOW Current 0.5 IEE Power Supply Current 20 80 0.5 400 0.5 26 35 80 0.5 400 0.5 21 27 36 Typ 22 0.5 Max µA 0.5 28 38 25 31 1 For supply voltages other than 3.3V, use the ECL table values and add supply voltage value 2 Each output is terminated through a 50Ω resistor to VCC -2V 3 BOOST is internally bonded to VEE for the MSOP8 packages 4 Supported in MLP16 package only www.azmicrotek.com +1-480-962-5881 Request a Sample Unit Min 80 Typ 85 °C Max Input HIGH Current - D Typ 25 °C 41 mA 8 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ10/100EP16VS ECL/PECL Differential Receiver with Variable Output Swing Table 7 - AC Characteristics AC Characteristics (VEE = -3.0V to -3.6V, VCC = GND or VEE = GND, VCC = +3.0V to +3.6V) Symbol -40 °C Characteristic Min 4 fmax Max Toggle Frequency tPLH/tPHL Propagation Delay to Output tskew Duty Cycle Skew1 Typ 0 °C Max Min Typ >4 100 160 VPP Minimum Input Swing VCMR Common Mode Range4 Av Small Signal Gain4 tr/tf Output Rise/Fall Times Q (20%-80%) 150 VEE + 2.0 Max Min >4 240 100 5 2 25 °C VCC Max Min >4 160 240 5 20 150 VEE + 2.0 Typ 85 °C VCC 100 240 5 20 VCC 120 280 ps 5 20 ps 150 VEE + 2.0 mV VCC 120 170 130 180 130 180 150 Duty cycle skew is the difference between a tPLH and tPHL propagation delay through a device. VPP is the minimum peak-to-peak differential input swing for which AC parameters guaranteed. 5 V dB 2 4 GHz 190 1 3 Max >4 160 150 VEE + 2.0 Typ Unit 200 ps The VCMR range is referenced to the most positive side of the differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPP (min) and 1V. Differential input, differential output. 240Ω to VEE on Q/Q¯ outputs, VCTRL = NC and BOOST = VEE (for MLP 16 package). See Figure 2 www.azmicrotek.com +1-480-962-5881 Request a Sample 9 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ10/100EP16VS ECL/PECL Differential Receiver with Variable Output Swing PACKAGE DIAGRAM MSOP8 Green/RoHS compliant/Pb-Free MSL=1 www.azmicrotek.com +1-480-962-5881 Request a Sample 10 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ10/100EP16VS ECL/PECL Differential Receiver with Variable Output Swing PACKAGE DIAGRAM MLP16 Green/RoHS compliant/Pb-Free MSL=1 Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona Microtek, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc. product could create a situation where personal injury or death may occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part. www.azmicrotek.com +1-480-962-5881 Request a Sample 11 May 2012, Rev 2.0