7000 Series Miniature Rocker & Lever Handle Switches Features/Benefits • Multi-pole and multi-position • Wide variety of actuator and termination options Typical Applications • Telecommunications • Instrumentation • Medical equipment • Epoxy terminal-seal compatible with bottom wash cleaning • RoHS compliant Models Available Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC; 2 AMPS @ 250 V AC. See page H-21 for additional ratings. ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break cycles at full load. All other models: 40,000 cycles. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or diallyl phthalate (DAP) (UL 94V-0). ACTUATOR: Nylon, black. FRAME (FRONT MOUNT): Nylon, black. FRAME (REAR MOUNT): Spring steel, black. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, matte-tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page G-21 for additional contact materials. CENTER CONTACTS & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page G-21 for additional contact materials. TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical Data Section HARDWARE: Mounting nuts & screws: Brass. Lockwasher: Stainless steel. Standoff: Nylon standard. NOTE: Any models supplied with S, P, R, Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch Rocker To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G-5 through G-25 . For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function 7101 SP On-None-On 7103 SP On-Off-On 7105 SP Mom.-Off-Mom. 7107 SP On-Off-Mom. 7108 SP On-None-Mom. 7109 SP None-On-Mom. 7201 DP On-None-On 7203 DP On-Off-On 7205 DP Mom.-Off-Mom. 7207 DP On-Off-Mom. 7208 DP On-None-Mom. 7211 DP On-On-On 7213 DP On-On-Mom. 7215 DP Mom.-On-Mom. 7301 3P On-None-On 7303 3P On-Off-On 7401 4P On-None-On 7405 4P Mom.-Off-Mom. 7411 4P On-On-On Note: UL/CSA models available, see pages H-5 and H-6. Actuator J1 .531 long rocker J2 Lever J3 .906" long rocker J8 .699" long rocker J10 1.318" long rocker J11 Rocker with frame J15 Rocker, snap-in J16 Rocker with frame, snap-in J19 Rocker with frame J21 Lever with frame J25 Lever, snap-in J26 Lever with frame, snap-in J37 Rocker with frame J50 Rocker J51 Rocker with frame J52 Rocker with frame for LED, snap-in J60 Lever J61 Lever with frame, snap-in J62 Lever with frame for LED, snap-in J90 Lever J91 Lever with frame, snap-in Terminations Right angle, PC thru-hole A AV2 Vertical right angle, PC thru-hole C PC Thru-hole Z Solder lug A3 Right angle, snap-in, PC thru-hole AV3 Vertical right angle, snap-in, PC thru-hole AW3 Right angle, extended, PC thru-hole V2 .555" high, V-bracket V3 .460" high, V-bracket V4 .630" high, V-bracket V5 Vertical right angle, PC thru-hole V6 .460" high, V-bracket V7 .630" high, V-bracket V8 .953" high, V-bracket V9 1.150" high, V-bracket V31 .460" high, V-bracket, snap-in V51 Vertical right angle, snap-in V61 .460" high, V-bracket, snap-in W .750" long, wire wrap W3 .425" long, wire wrap W5 1.305" long,wire wrap Z3 Quick connect Contact Material B Gold P Gold, matte tin Q Silver S Silver, matte-tin G Gold over silver R Gold over silver, matte-tin Seal E Epoxy I Epoxy potted base Actuator Color 2 Black 1 White 3 Red Frame Color 2 Black NONE No frame color required 1 White Metal Frame Color (J11, J19, J21 & J37 Actuators) 2 Black 1 White Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G G–4 www.ck-components.com 7000 Series Miniature Rocker & Lever Handle Switches SWITCH FUNCTION POS. 1 NO. POLES SP MODEL NO. UL/CSA** MODEL NO. SWITCH FUNCTION POS. 2 POS. 3 CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 C&K marking on opposite side 7101 U11 7103 U13 ON OFF ON 7105 U15 MOM. OFF MOM. 7107 U17 ON OFF MOM. 7108 U18 ON NONE MOM. 7109 U19 NONE ON MOM. ON NONE C&K marking on opposite side ON SCHEMATIC N/A 2-3 OPEN 2-1 N/A N/A 2-3 2-1 SPDT SPDT Terminal Nos. For Reference Only Part number shown: 7101J1ZQE2 DP 7201 U21 ON NONE ON 7203 U23 ON OFF ON 7205 U25 MOM. OFF MOM. 7207 U27 ON OFF MOM. 7208 U28 ON NONE MOM. 7211* U211* ON ON ON 7213* U213* ON ON MOM. 7215* U215* MOM. ON MOM. N/A OPEN 2-3,5-6 2-1,5-4 N/A 2-3,5-4 DPDT DPDT MOM. = Momentary ** U11 through U413 model nos. * Wiring for 3-way switch, see Section N. with all options when ordered with G, Q, R or S contact material. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–5 www.ck-components.com Rocker Terminal Nos. For Reference Only Part number shown: 7201J1ZQE2 G 7000 Series Miniature Rocker & Lever Handle Switches SWITCH FUNCTION SWITCH FUNCTION POS. 1 POS. 2 POS. 3 NO. POLES 3P MODEL NO. UL/CSA** MODEL NO. 7301 U31 POS. 1 C&K marking on opposite side ON NONE CONNECTED TERMINALS POS. 2 POS. 3 C&K marking on opposite side SCHEMATIC N/A ON 2-3,5-6,8-9 2-1,5-4,8-7 OPEN 7303 U33 ON OFF ON 3PDT 3PDT Part number shown: 7301J1ZQE2 4P Terminal Nos. For Reference Only 7401 U41 ON NONE ON 7405 U45 MOM. OFF MOM. 7411* U411* ON ON ON N/A 2-3,5-6,8-9,11-12 2-1,5-4,8-7,11-10 OPEN 2-3,5-4,8-9,11-10 4PDT 4PDT Rocker Part number shown: 7401J1ZQE2 Terminal Nos. For Reference Only MOM. = Momentary ** U11 through U411 model nos. with all options when ordered with G, Q, R or S contact material. * Wiring for 3-way switch: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G G–6 www.ck-components.com 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–PANEL REAR MOUNT ACTUATOR J1 ROCKER OPTION CODE ACTUATOR COLOR 2 BLACK 1 WHITE 3 RED Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. J2 NOTE: Hardware: two each—mounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on all switches with panel mounting brackets. Actuators available separately, see page G-22. Hardware is available see Technical Data section of this catalog. LEVER J1, J2, J3, J8 & J10 Actuators available with C, W-W5, Z or Z3 terminations. PANEL MOUNTING J1 & J2 Actuators J3 ROCKER DIMPLES MFG. OPTION J3 Actuator J8 ROCKER J8 Actuator J10 ROCKER DIMPLES MFG. OPTION J10 Actuator Rocker Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–7 www.ck-components.com G 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–SNAP-IN FRONT MOUNT J15 OPTION CODE BLACK 1 WHITE 3 RED 2 ROCKER, SNAP-IN No frame color choice required FRAME COLOR J16 ROCKER WITH FRAME, SNAP-IN J25 LEVER, SNAP-IN BLACK NONE 1 FRAME COLOR ACTUATOR COLOR 2 OPTION CODE ACTUATOR No Frame Color (J15 or J25options) WHITE Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-22 and G-25. J15, J16, J25, J26, J50 & J51 Actuators available with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z and Z3 terminations. PANEL MOUNTING J15, J16, J25 & J26 Actuators No frame color choice required J26 LEVER WITH FRAME, SNAP-IN J50 ROCKER, SNAP-IN J50 Actuator Rocker * * For J50: Increase this dimension to .620/.625 (15,75/15,88) for .091/.125 (2,31/3,18) thk. panels. No frame color choice required Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G G–8 www.ck-components.com 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–SNAP-IN FRONT MOUNT J51 ACTUATOR FRAME COLOR ROCKER WITH FRAME, SNAP-IN OPTION CODE J52 2 BLACK 1 WHITE 3 RED OPTION CODE ROCKER WITH FRAME FOR LED, SNAP-IN ACTUATOR COLOR 2 NONE 1 FRAME COLOR BLACK No Frame Color (J15 or J25 options) WHITE Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-22 and G-25. J51, J52, J60 & J61 Actuators available with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z and Z3 terminations. LED not included. For LED information, see page H-24. J60 LEVER, SNAP-IN PANEL MOUNTING J51, J60 & J61 Actuators * No frame color choice required J61 J52 Actuator * LEVER WITH FRAME, SNAP-IN Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–9 www.ck-components.com Rocker For J51, J52: Increase this dimension to .620/.625 (15,75/15,88) for .060/.125(1,52/3,18) thk. panels. G 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–SNAP-IN FRONT MOUNT J62 OPTION CODE BLACK 1 WHITE 3 RED 2 LEVER WITH FRAME FOR LED, SNAP-IN FRAME COLOR BLACK NONE 1 FRAME COLOR ACTUATOR COLOR 2 OPTION CODE ACTUATOR No Frame Color (J90 options) LED not included. For LED information, see page H-25. WHITE Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. J90 LEVER, SNAP-IN NOTE: Actuators & frames available separately, see pages G-22 and G-25. J62, J90 & J91 Actuators available with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z & Z3 terminations. PANEL MOUNTING J62 Actuator * No frame color choice required. J91 LEVER WITH FRAME, SNAP-IN J90, J91 & J93 Actuators Rocker * * For J90: Increase this dimension to .620/.625 (15,75/15,88) for .091/.125 (2,31/3,18) thk. panels. For J91: Increase this dimension to .620/.625 (15,75/15,88) for .060/.125 (1,52/3,18) thk. panels. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G G–10 www.ck-components.com 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR–REAR MOUNT J11 ACTUATOR FRAME COLOR ROCKER WITH FRAME OPTION CODE 2 BLACK 1 WHITE 3 RED OPTION CODE J19 ROCKER WITH FRAME ACTUATOR COLOR FRAME COLOR 2 BLACK 1 WHITE Actuator finish: Matte. Frame finish: Gloss. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-22 and G-25. J11, J19, J21 & J37 Actuators available with C, W-W5, Z & Z3 terminations. PANEL MOUNTING J21 J11 & J21 Actuators LEVER WITH FRAME J19 Actuator J37 ROCKER WITH FRAME .313 (7,95) J37 Actuator Rocker Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–11 www.ck-components.com G 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–PC MOUNT ACTUATOR OPTION CODE J1 ROCKER J2 LEVER J3 ROCKER J8 ROCKER ACTUATOR COLOR 2 BLACK 1 WHITE 3 RED Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Some permissible actuator/termination combinations may lack clearance between actuator and PC board, and care must be exercised to accommodate this condition. Actuators available separately, see page G-22. J1, J2 & J8 actuators available with A, A3, AV2, AV3, AW3 & V2 terminations. J3 actuators available with AV2, AV3 & V2-V61 terminations. J50 actuators available with A (DP, 3P models only), A3 (DP, 3P models only), AV2, AV3, AW3 (DP, 3P models only) & V2-V61 terminations. ROCKER Rocker J50 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G G–12 www.ck-components.com 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–PC MOUNT ACTUATOR J60 LEVER OPTION CODE ACTUATOR COLOR 2 BLACK 1 WHITE 3 RED Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Some permissible actuator/termination combinations may lack clearance between actuator and PC board, and care must be exercised to accommodate this condition. J90 LEVER Actuators available separately, see page G-22. J60 & J90 actuators available with A (DP, 3P models only), A3 (DP, 3P models only), AV2, AV3, AW3 (DP, 3P models only) & V2-V61 terminations. TERMINATIONS Z C SOLDER LUG PC THRU-HOLE PC MOUNTING SPDT thru 4PDT Z3 Not available with P, R or S contact materials. Available actuators, see pages G-7 through G-13. SPDT thru 4PDT W, W3, W5 QUICK CONNECT NOTE: Available actuators, see pages G-7 through G-13. WIRE WRAP Dim 'A' DIM ‘A’ W .750 (19,05) W3 .425 (10,80) W5 1.305 (33,15) Rocker SPDT thru 4PDT Not available with P, R or S contact materials. Available actuators, see pages G-7 through G-13. Mating quick connector available; order part number 530100000, page G-23. OPTION CODE SPDT thru 4PDT NOTE: Available actuators, see pages G-7 through G-13. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–13 www.ck-components.com G 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS A RIGHT ANGLE, PC THRU-HOLE SECTION A-A Actuator Shown In Pos. 1 A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE AW3 RIGHT ANGLE, EXTENDED, PC THRU-HOLE 7101J1ABE2 Horizontal Actuation SPDT PC MOUNTING .14 (3,6) Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. A NOTE: PC pattern must clear switch support leg. RIGHT ANGLE, PC THRU-HOLE SECTION A-A Actuator Shown In Pos. 1 A3 7201J1ABE2 Horizontal Actuation DPDT RIGHT ANGLE, SNAP-IN, PC THRU-HOLE Rocker PC MOUNTING Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G G–14 www.ck-components.com 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS A RIGHT ANGLE, PC THRU-HOLE 7301J1ABE2 Horizontal Actuation 3PDT Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH 7101J1AV2BE2 Vertical Actuation SPDT AV3 Actuator Shown In Pos. 1 SECTION A-A VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH PC MOUNTING Rocker Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–15 www.ck-components.com G 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH SECTION A-A Actuator Shown In Pos. 1 AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH 7201J1AV2BE2 Vertical Actuation DPDT PC MOUNTING Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH Actuator Shown In Pos. 1 PC MOUNTING VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH Rocker AV3 SECTION A-A 7301J1AV2BE2 Vertical Actuation 3PDT Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G G–16 www.ck-components.com 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH 7401J1AV2BE2 Vertical Actuation 4PDT AV3 Actuator Shown In Pos. 1 SECTION A-A VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH PC MOUNTING Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH 7101J1V5BE2 Vertical Actuation SPDT V51 Actuator Shown In Pos. 1 SECTION A-A VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH PC MOUNTING Rocker Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–17 www.ck-components.com G 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH Actuator Shown In Pos. 1 V51 SECTION A-A VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH 7201J1V5BE2 Vertical Actuation DPDT PC MOUNTING Not available with I seal option. Available actuators, see pages G-7 and G-13. Terminal bend radii and lead-in manufacturing option. V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Rocker 7101J1__BE2 SPDT Actuator Shown In Pos. 1 OPTION CODE DIM ‘A’ V2, V21 .555 (14,10) V6, V61 .460 (11,68) V7 .630 (16,00) V8 .953 (24,21) Not available with I seal option. Available actuators, see pages G-7 and G-13. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G G–18 www.ck-components.com 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET V21, V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING SNAP-IN 7201J1__BE2 DPDT Actuator Shown In Pos. 1 Not available with I seal option. Available actuators, see pages G-7 and G-13. V2, V7, V8 VERTICAL MOUNT, V-BRACKET V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN DIM ‘A’ V2, V21 .555 (14,10) V6, V61 .460 (11,68) V7 .630 (16,00) V8 .953 (24,21) PC MOUNTING SNAP-IN 7301J1__BE2 3PDT Actuator Shown In Pos. 1 Not available with I seal option. Available actuators, see pages G-7 and G-13. V2, V7, V8 VERTICAL MOUNT, V-BRACKET V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN OPTION CODE DIM ‘A’ V2, V21 .555 (14,10) V7 .630 (16,00) V8 .953 (24,21) PC MOUNTING Actuator Shown In Pos. 1 OPTION CODE DIM ‘A’ V2, V21 .555 (14,10) V7 .630 (16,00) V8 .953 (24,21) Rocker SNAP-IN 7401J1__BE2 4PDT OPTION CODE Not available with I seal option. Available actuators, see pages G-7 and G-13. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–19 www.ck-components.com G 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V3, V4, V9 VERTICAL MOUNT, V-BRACKET V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING 7101J1__BE2 SPDT SNAP-IN Actuator Shown In Pos. 1 Not available with I seal option. Available actuators, see pages G-7 and G-13. OPTION CODE DIM ‘A’ V3, V31 .460 (11,68) V4 .630 (16,00) V9 1.150 (29,21) V3, V4, V9 VERTICAL MOUNT, V-BRACKET V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING 7201J1__BE2 DPDT SNAP-IN OPTION CODE DIM ‘A’ V3, V31 .460 (11,68) Actuator Shown In Pos. 1 V4 .630 (16,00) Not available with I seal option. Available actuators, see pages G-7 and G-13. V9 1.150 (29,21) V4, V9 VERTICAL MOUNT, V-BRACKET PC MOUNTING Rocker 7301J1__BE2 3PDT OPTION CODE SNAP-IN Actuator Shown In Pos. 1 Not available with I seal option. Available actuators, see pages G-7 and G-13. DIM ‘A’ V4 .630 (16,00) V9 1.150 (29,21) Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G G–20 www.ck-components.com 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V4, V9 VERTICAL MOUNT, V-BRACKET PC MOUNTING SNAP-IN 7401J1__BE2 4PDT OPTION CODE Actuator Shown In Pos. 1 Not available with I seal option. Available actuators, see pages G-7 and G-13. DIM ‘A’ V4 .630 (16,00) V9 1.150 (29,21) CONTACT MATERIAL OPTION CODE B P Q S G R CONTACT MATERIAL TERMINAL PLATING GOLD 1 RATINGS GOLD 1 LOW LEVEL/ MATTE-TIN 6 DRY CIRCUIT 0.4 VA MAX. @ 20 V AC OR DC MAX. SILVER 5 SILVER 4,5 MATTE-TIN 6 GOLD OVER SILVER 2,3 POWER GOLD 3 LOW LEVEL/DRY MATTE-TIN 6 CIRCUIT OR POWER 5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. 0 4 VA MAX @ 20 V AC OR DC MAX OR 5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. U11-U415 model numbers G, Q, S & R contact material. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. 4 END CONTACTS: Coin silver, silver plated. with all options when ordered with B contact material standard with all terminations except C, Z & Z3. Q contact material standard with C, Z & Z3 terminations. P, S & R, contact materials not available with Z & Z3 terminations. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with Q, B, G S, P & R contact material are RoHS compliant. SEAL E EPOXY SEAL I EPOXY POTTED BASE 'A' DIM ‘A’ SP .410 (10,41) DP .440 (11,18) 3P .505 (12,83) 4P .505 (12,83) Rocker NO. POLES Available with C, W through W5, Z & Z3 terminations. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–21 www.ck-components.com G 7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE Panel mounting hardware for rocker and lever handle switches is available separately. Mounting hardware consists of two screws, two nuts, two standoffs and two lockwashers per switch, and is available for panel thicknesses of 1/16, 3/32 and 1/8 inch. See part numbers below. TYPICAL ASSEMBLY SCREW PANEL THICKNESS STAND-OFF LENGTH STAND-OFF LOCKWASHER NUT J3 actuators J1 & J2 actuators PART NO. PANEL THK. STANDOFF LENGTH PART NO. PANEL THK. STANDOFF LENGTH 761103000 1/8 IN. (3,18) .233 (5,92) 770603000 1/8 IN. (3,18) .233 (5,92) PART NO. PANEL THK. STANDOFF LENGTH 770703000 1/8 IN. (3,18) .233 (5,92) J10 actuators MATERIAL Rocker Screws, nuts, lockwashers: Stainless steel. Standoffs: Nylon, standard. J1, J11, J15 & J16 Actuators J2, J21, J25 & J26 Actuators J3 & J37 Actuators PART NO. PART NO. PART NO. 776A01000 WHITE 776A02263 BLACK 776A03000 RED 426D01000 WHITE 426D02263 BLACK 426D03000 RED 431D01000 WHITE 431D02263 BLACK 431D03000 RED Material: Nylon Finish: Matte Material: Nylon Finish: Matte Material: Nylon Finish: Matte J50, J51 & J52 Actuators J60, J61 & J62 Actuators J8 Actuator PART NO. PART NO. 775A01000 WHITE 775A02263 BLACK 775A03000 RED 598101000 613802263 598103000 Material: Nylon Finish: Matte Material: Nylon Finish: Matte PART NO. 488701000 488702263 488703000 WHITE BLACK RED WHITE BLACK RED Material: Nylon Finish: Matte Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G G–22 www.ck-components.com 7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE J90 & J91 Actuators J10 & J19 Actuators PART NO. PART NO. 598001000 WHITE 598002263 BLACK 598003000 RED 769501000 769502263 769503000 Fits Z3 Termination female connector WHITE BLACK RED Material: Nylon Finish: Matte Material: Nylon Finish: Matte Frame for J11 & J21 Actuators Frame for J16 & J26 Actuators Available in loose pieces. 764500746 764500747 BLACK ENAMEL WHITE ENAMEL 764601106 RETAINING SPRING 459101000 459102000 459103000 Frame for J51, J61 & J91 Actuators PART NO. PART NO. PART NO. PART NO. 530100000 WHITE BLACK RED 615601000 615602263 615603000 WHITE BLACK RED Material: Nylon Finish: Matte Material: Nylon Finish: Matte Frame for J19 Actuator Frame for J37 Actuator Frame for J52 & J62 Actuators PART NO. 613301000 613302263 613303000 PART NO. PART NO. 781000746 781000747 BLACK ENAMEL WHITE ENAMEL Material: Spring Steel 445400746 445400747 BLACK ENAMEL WHITE ENAMEL Material: Spring Steel WHITE BLACK RED Material: Nylon Finish: Matte Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–23 Rocker Material: Spring Steel www.ck-components.com G 7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte. TYPICAL APPLICATION J1 & J2 Actuators .047” (1,19) PANEL THK. .062” (1,57) PANEL THK. .090” (2,29) PANEL THK. .125” (3,18) PANEL THK. PART NO. PART NO. PART NO. PART NO. 452902263 452702263 452802263 452602263 BLACK .047” (1,19) PANEL THK. .062” (1,57) PANEL THK. .090” (2,29) PANEL THK. .125” (3,18) PANEL THK. PART NO. PART NO. PART NO. PART NO. 432502263 432602263 432702263 432802263 BLACK J50, J60 & J90 Actuators PANEL MOUNTING For part numbers 4529xxxxx, 4527xxxxx, 4528xxxxx, 4526xxxxx .005 R. MAX. (0,13) TYP. .495 – .505 (12,57 – 12,83) .005 R. .495 – .505 (0,13) (12,57 – 12,83) MAX. TYP. .595 – .605 (15,11 – 15,37) For part numbers 4327xxxxx, 4328xxxxx .005 R. (0,13) MAX. TYP. .495 – .505 (12,57 – 12,83) .620 – .625 (15,75 – 15,88) Rocker .797 – .803 (20,24 – 20,40) For part numbers 4325xxxxx, 4326xxxxx Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G G–24 www.ck-components.com 7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE Panel Inserts Will fit Separate Snap-in frames for J50, J60 & J90 actuators Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. PANEL INSERT WITH HOLE FOR LED BLANK PANEL INSERT WITHOUT HOLE FOR LED PART NO. PART NO. 894902000 476602000 BLACK NOTE: Special colors, custom markings available, consult Customer Service Center. LED INFORMATION Process Information: Soldering to LED leads must be completed within 5 seconds at 500º F (260ºC) maximum. LEDs are not supplied with J52, J62 options. LED snaps into switch frame surrounding actuator and is wired externally. Flat denotes cathode. .230 DIA. (5,84˘) .200 DIA. (5,08˘) .025 SQ. TYP. (0,63) .030 (0,76) .340 (8,64) .750 (19,05) Suggested LED for J52 & J62 options. Dimensions for reference only. Rocker Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–25 www.ck-components.com G