SMD Fast Recovery Rectifiers CFRA201-G Thru. CFRA207-G Reverse Voltage: 50 to 1000 Volts Forward Current: 2.0 Amp RoHS Device DO-214AC (SMA) Features -Fast switching for high efficiency. 0.181(4.60) 0.157(4.00) -Diffused junction. -Low reverse leakage current. 0.114(2.90) 0.093(2.35) 0.065(1.65) 0.049(1.25) -Low forward voltage drop. -High current capability. -The plastic material carries UL recognition 94V-0 0.208(5.28) 0.189(4.80) Mechanical data 0.012(0.31) 0.006(0.15) 0.103(2.62) 0.079(2.00) -Case: JEDEC DO-214AC, molded plastic. 0.008(0.20) 0.002(0.05) 0.060(1.52) 0.030(0.76) -Terminals: solderable per MIL-STD-750, method 2026. -Polarity: Color band denotes cathode end. -Approx. weight: 0.053 grams Dimensions in inches and (millimeter) Circuit diagram Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol CFRA 201-G CFRA 202-G CFRA 203-G CFRA 204-G CFRA 205-G CFRA 206-G CFRA 207-G Units Max. Repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Max. DC blocking voltage VDC 50 100 200 400 600 800 1000 V Max. RMS voltage VRMS 35 70 140 280 420 560 700 V Peak surge forward current, 8.3ms single half sine-wave superimposed on rate load (JEDEC method) IFSM 30 A Max. Average forward current IO 2.0 A Max. Peak forward voltage at 2.0A DC Parameter VF 1.3 V Max. DC reverse current at TJ=25 °C rated DC blocking voltage TJ=100 °C IR 5.0 100 μA Max. Reverse recovery time (Note1) Trr 150 Typical junction capacitance (Note2) CJ 30 Typical thermal resistance (Note 3) RθJA 25 °C/W TJ 150 °C TSTG -55 to +150 °C Operating junction temperature Storage temperature 250 500 20 nS pF Notes: 1. Measured with IF=0.5A,IR=1A,IRR=0.25A 2. Measured at 1.0 MHZ and applied reverse voltage of 4.0V DC 3. Thermal resistance junction to ambient. REV:A Page 1 QW-BF009 Comchip Technology CO., LTD. SMD Fast Recovery Rectifiers RATING AND CHARACTERISTIC CURVES (CFRA201-G thru CFRA207-G) Fig.1- Forward current derating curve Fig.2- Maximum Non-repetitive Surge Current 60 Peak forward surge current, (A) Average forward current, (A) 2.0 1.5 1.0 0.5 Single phase half wave 60Hz Resistive or inductive lode 50 40 30 20 TJ=25°C Pulse width 8.3ms single half - sine - wave (JEDEC method) 10 0 0 25 50 75 100 125 150 1 175 100 Number Of Cycle At 60Hz Ambient temperature, (°C) Fig.3- Typical junction capacitance Fig.4- Typical forward characteristics 10 Instantaneous forward current, (A) 100 Capacitance, (pF) 10 CFRA201-G-CFRA204-G 10 CFRA205-G-CFRA207-G TJ=25°C, f=1MHZ 1 TJ=25°C 0.1 Pulse width 300μS 0.01 0 1 10 100 0 Reverse Voltage, (V) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Instantaneous forward voltage, (V) REV:A Page 2 QW-BF009 Comchip Technology CO., LTD. SMD Fast Recovery Rectifiers Reel Taping Specification d P0 T P1 E Index hole F W B C P A 12 o 0 D2 D1 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 10 pitches (min) Start 10 pitches (min) Direction of Feed DO-214AC (SMA) DO-214AC (SMA) SYMBOL A B C d D D1 D2 (mm) 2.72 ± 0.10 5.25 ± 0.10 2.36 ± 0.10 1.55 ± 0.05 330 ± 2.00 50.0 MIN. 13.00 ± 0.20 (inch) 0.107 ± 0.004 0.207 ± 0.004 0.093 ± 0.004 0.061 ± 0.002 12.99 ± 0.079 1.969 MIN. 0.512 ± 0.008 SYMBOL E F P P0 P1 T W W1 (mm) 1.75 ± 0.10 5.50 ± 0.05 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 0.30 ± 0.010 12.0 ± 0.30 12.4+2.00/-0.00 (inch) 0.069 ± 0.004 0.217 ± 0.002 0.157± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.012± 0.004 0.472 ±0.012 0.488 + 0.079/-0 REV:A Page 3 QW-BF009 Comchip Technology CO., LTD. SMD Fast Recovery Rectifiers Marking Code Part Number Marking Code CFRA201-G RS2AA CFRA202-G RS2BA CFRA203-G RS2DA CFRA204-G RS2JA CFRA205-G RS2MA XXXXX xxxxx= Product type marking code Suggested PAD Layout DO-214AC (SMA) D SIZE (mm) (inch) A 4.00 0.157 B 1.70 0.067 C 1.80 0.071 D 6.00 0.236 E 2.30 0.091 A E C B Standard Packaging Qty Per Reel Reel Size (Pcs) (inch) 5,000 13 Case Type DO-214AC (SMA) REV:A Page 4 QW-BF009 Comchip Technology CO., LTD.