HALOGEN Fast-Acting SMD Brick™ Fuses HF FREE CB61F Series Pb Dimensions - mm Drawing Not to Scale Surface Mount Device Description Agency Information The fast-acting CB61F Series of SMD Brick™ fuse provides high breaking capacity performance in a CQC Approved SMD package. The CB61F Series offers 125Vac/50A and 125Vdc/300A protection up to 15 amps, which is among the highest in its class. • cULus: Standard UL 248-14, Guide JDYX, File E 19180 and Guide JDYX7, File E19180 • PSE: JET 1641-31007-1003 (2A-5A) JET 1641-31007-1004 (6.3A-10A) JET 1641-31007-1005 (12-15A) • CQC: CQC09012040316 (2A-6.3A & 8A-10A) Features • High Interrupting Ratings: 50A @ 125Vac / 300A @ 125Vdc • Wide Selection: The CB61F Series is available in ratings from 2 to 15 amps providing a range of solutions for applications requiring fast-acting performance • CQC Approved: Meets the growing market demand. • cULus Certified and PSE Level 1 Certified • Excellent Environmental Integrity: lead-free, halogen free and RoHS compliant, and present no disposal issues at end of life. • Solder immersion compatible • Wire-in-Air design Ordering Specify product and packaging code Environmental Data Applications • • • • LCD/PDP TVs • LCD Monitors Notebooks • Servers Telecom/PoE • Medical equipment Industrial applications • LCD backlight inverters • Power supplies • White goods • Mechanical Shock: MIL-STD-202G, Method 213B, Test Condition C (100 G’s peak for 6 milliseconds; half-sine waveform) • Mechanical Vibration: MIL-STD-202G, Method 201,Test Condition A (10-55Hz, 0.06 inch, total excursion) • Insulation Resistance: MIL-STD-202, Method 302, Test Condition A (after opening) 10,000 ohms minimum • Resistance to Solder Heat: MIL-STD-202G, Method 210F, Test Condition D (10 sec, at 260°C); Test Condition A (350°C, 5s) for hand solder • Thermal Shock: MIL-STD-202, Method 107G, Test Condition B (-65°C to +125°C) Specifications Catalog Number CB61F2A CB61F3A CB61F4A CB61F5A CB61F6.3A CB61F7A CB61F8A CB61F10A CB61F12A CB61F15A Current Ratings (amps) 2 3 4 5 6.3 7 8 10 12 15 Voltage Ratings Vac Vdc 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 Interrupting Ratings (amps)* 125Vac 125Vdc 100 100 100 100 100 100 100 100 50 50 300 300 300 300 300 300 300 300 300 300 Typical Cold Resistance (Ω)** 0.039 0.025 0.017 0.013 0.010 0.009 0.008 0.006 0.005 0.004 Typical Melting I2t (A2s)*** Typical Voltage Drop (mV) cULus Agency Approvals PSE 0.85 2.08 4.4 7.7 13.7 15.6 19.5 36 40 56 100 100 93 90 90 85 90 90 90 85 X X X X X X X X X X X X X X X X X X X X ‡ * AC Interrupting Rating (measured at designated voltage, 100% power factor); DC Interrupting Rating (measured at designated voltage, time constant of less than 50 microseconds, battery source) ** Typical Cold Resistance (measured at 10% of rated current) *** Typical Melting I2t (measured with a battery bank at rated DC voltage, 10x-rated current, time constant of calibrated circuit less than 50 microseconds) ‡ Typical Voltage Drop (measured at rated current after temperature stabilizes) 0112 BU-SB111447 Page 1 of 3 Data Sheet 4377 CQC X X X X X X X Time-Current Curves 2A 3A 4A 6.3A 7A 8A 10A 12A 15A 1000 100 Time (s) 10 1 0.1 0.01 1 10 100 Current (A) 0112 BU-SB111447 Page 2 of 3 Data Sheet 4377 Soldering Characteristics Recommended Pad Layout Wave Immersion • Reservoir Temperature: 260° C • Time in Reservoir : 10 Seconds Maximum Infrared Reflow • Temperature: 260° C • Time: 30 Seconds Maximum Hand Soldering • Maximum tip temperature: 350°C • Maximum soldering time: 5 seconds max Recommend Reflow Profile Packaging Code Packaging Code Suffix -TR1 -TR2 Description 1000 Fuses in Tape and Reel on 7 inch (178mm) diameter reel 5000 Fuses in Tape and Reel on 13 inch (330mm) diameter reel The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Life Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. © 2012 Cooper Bussmann www.cooperbussmann.com 0112 BU-SB111447 Page 3 of 3 Data Sheet 4377