DIOTEC ELECTRONICS CORP Data Sheet No. BUDI-5000D-1A 18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958 50 AMP JUMBO DIODE CELL MECHANICAL SPECIFICATION FEATURES Void Free Vacuum Die Soldering For Maximum Mechanical Strength and Heat Dissipation (Solder Voids: Typical < 2%, Max. < 10% of Die Area) Die Size: 0.180" x 0.180" Square D Smallest Diameter A Slug Is Anode Biggest Effective Die Area for the 50 Amp Class of Jumbo Diode Cells Proprietary Passivation G F O High Temperature Solder (Solidus 287 C, Liquidus 296OC) to Allow Higher Operating And Assembly Temperatures B Silver Plated Largest Diameter Copper Slugs Slug Is Cathode Silicon Die Copper Headers Are Silver Plated For Easy Soldering And Superior Solder Joints MILLIMETERS DIM MIN MAX MIN MAX 7.25 7.35 0.285 0.290 B 2.05 2.15 0.080 0.085 D 6.50 6.60 0.256 0.260 A Largest Diameter Header Is Cathode RoHS COMPLIANT INCHES F 0.72 0.82 0.028 0.032 G 0.96 1.07 0.038 0.042 MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Ratings at 25 °C ambient temperature unless otherwise specified. PARAMETER (TEST CONDITIONS) BAR Series Number BAR BAR BAR BAR UNITS BAR BAR 5001D 5002D 5004D 5006D 5008D 5010D 5012D RRM Maximum DC Blocking Voltage V RMS Maximum RMS Voltage V Maximum Peak Recurrent Reverse Voltage V C RRM IO o Average Forward Rectified Current @ T =125 C Peak Forward Surge Current (8.3mS single half sine wave FSM I superimposed on rated load) FM V Maximum Forward Voltage Drop at 50 Amps DC @ T At Rated DC Blocking Voltage @ T Maximum Thermal Resistance, Junction to Case (Note 1) Junction Operating and Storage Temperature Range o A = 25 C A = 125 oC Maximum Average DC Reverse Current Notes: 1) Single Side Cooled RATINGS SYMBOL 800 1000 1200 100 200 400 600 70 140 280 420 560 700 840 100 200 400 600 800 1000 1200 VOLTS 50 AMPS 600 1.1 (1.05 Typical) 2 1.15 VOLTS 50 mA JC 0.8 °C/W J STG -65 to +175 °C RM I Rq T ,T BAR50d K15