EMCORE 2522A-SF-AC

2522 Microwave Packaged Photodiode
DATASHEET | JUNE 2013
MICROWAVE
The 2522 packaged photodiode incorporates a high-speed
planar PIN photodiode to provide a highly reliable, high-power
photodiode component. This package is well suited for receiver
applications with optical preamplification. The diode is well
matched over the microwave frequency band, thereby simplifying high-speed integration.
Performance Highlights
Applications
„„
Antenna Remoting
Parameter
Min
Typical
Max
Operating Temperature
-40
25
+85
Units
°C
Bandwidth
0.05
-
22
GHz
Responsivity, 1310 / 1550 nm
A/W
0.7
-
-
Dark Current (25 C)
-
-
5
nA
-
-
10
dBm
mA
„„
Military Communications
Max Optical Input
Max Current
-
-
12
„„
Phased Arrays
RF Return Loss
8
12
-
dB
Group Delay
-
40
-
ps, p-p
1280
-
1580
nm
15
-
-
V
-
-
-40
dB
-
5
12
V
-40
-
+85
°C
„„
„„
Electronic Warfare (EW) Systems
Optical Wavelength Range
Breakdown Voltage (IR = 10 µA)
Delay Lines
Optical Return Loss
Photodiode Bias Voltage
Features
Storage Temperature
„„
Highly Reliable Planar Photodiode Technology
„„
FC/APC or SC.APC
„„
High Power Capability
„„
High Breakdown Voltage
„„
Bandwidth up to 22 GHz
„„
Good RF matching, 12 dB typ.
„„
Hermetically Sealed
Pinout
Model Number
Symbol
Function
1
VPD
Photodiode Bias
2
GND
Case Ground
Schematic
DC Coupled
AC Coupled
2
1
2
1
RF Out
50
ohm
„„
© 2013 EMCORE Corporation | REV 2013.06
50
ohm
RF Out
For DC coupled version, do not connect RF output to a DC voltage greater than the
photodiode’s bias voltage.
626-293-3400
[email protected]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
2522 Microwave Packaged Photodiode
DATASHEET | JUNE 2013
MICROWAVE
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings
only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.
Parameter
Symbol
Min
Max
TSTG
-40
85
˚C
Forward Current
IF
-
5
mA
Reverse Bias Voltage
VR
-
15
V
Lead Soldering Temperature/Time
-
-
250/5
˚C/sec
RH
-
85
%
Storage Case Temperature Range
Relative Humidity (non-condensing)
Units
Electrical/Optical Characteristics
Parameter
Condition
Min
Typical
Max
Units
Operating Temperature
Symbol
TOP
Referenced to base of package
-40
25
85
˚C
Bias Voltage
VR
-
-
5
12
V
Capacitance
C
-
-
-
0.15
pF
-
-
10
dBm
0.7
-
-
A/W
-
-
5
50
nA
Optical Input
Responsivity
R
Dark Current
IDARK
25°C
85°C
Optical Return Loss
ORL
-
-
-
-40
dB
λ
-
1280
-
1580
nm
Wavelength
1310 / 1550 nm
RF Characteristics
Parameter
Symbol
Bandwidth
f
Condition
Min
Typical
Max
AC Coupled
2522A
2522B
2522C
0.05
0.05
0.05
-
10
20
22
DC Coupled
2522A
2522B
2522C
0.01
0.01
0.01
-
10
20
22
Resistively matched SMA connector
-
50
-
50 MHz – 10 GHz
50 MHz – 20 GHz (B & C only)
50 MHz – 22 GHz (C only)
-
2
3
4
4
5
6
10 MHz – 10 GHz
10 MHz – 20 GHz (B & C only)
10 MHz – 22 GHz (C only)
-
2
3
4
4
5
6
Impedance
Z
Flatness - AC Coupled
S21
Flatness - DC Coupled
Return Loss
Group Delay Flatness
2
Units
GHz
Ohm
dB p-p
RL
8
12
-
dB
GD
-
< 40
-
ps, p-p
1.Specified characteristics apply for the recommended operating conditions at beginning of life, 25°C, unless noted otherwise.
2.5% smoothing.
© 2013 EMCORE Corporation | REV 2013.06
626-293-3400
[email protected]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
2522 Microwave Packaged Photodiode
DATASHEET | JUNE 2013
MICROWAVE
Ordering Information – Model Number Options
Model Number
Description
2522A-SF-AC-SA
Photodiode 10 GHz, SMA, AC Coupled, SC/APC
2522B-SF-AC-SA
Photodiode 20 GHz, SMA, AC Coupled, SC/APC
2522C-SF-AC-SA
Photodiode 22 GHz, SMA, AC Coupled, SC/APC
2522A-SF-DC-SA
Photodiode 10 GHz, SMA, DC Coupled, SC/APC
2522B-SF-DC-SA
Photodiode 20 GHz, SMA, DC Coupled, SC/APC
2522C-SF-DC-SA
Photodiode 22 GHz, SMA, DC Coupled, SC/APC
Typical S21 / S22 Data
Outline Drawing
© 2013 EMCORE Corporation | REV 2013.06
626-293-3400
[email protected]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.