Bobbin Mount End Stop - Type VE (Male) LOAD The Type VE Bobbin Mount End Stops are designed to be used on a wide range of applications to prevent shocks and over-loading thanks to their progressive absorption. They are manufactured from Natural Rubber in a variety of hardnesses to suit the application, and have a zinc plated steel end section with either welded or cold formed threads. This range comes with a Male thread on one end. Max. Static Deflection (mm) Maximum Stiffness (DaN) 2.9 1.6 4.6 45 3.6 1.6 5.8 M6 X 18 60 7.4 4.0 29.6 15 M6 X 18 45 13.8 3.0 41.4 25 15 M6 X 18 60 26.4 3.0 79.2 2520VE18-60 25 20 M6 X 18 60 17.7 4.0 70.8 4997281 4027VE23-60 40 27 M8 X 23 60 26.0 5.4 140.4 4997293 4035VE23-45 40 35 M8 X 23 45 9.0 7.0 63.0 4997359 7530VE37-70 75 30 M12 X 37 70 229.5 6.0 1377.0 Farnell Ref: Fibet Ref: D H MxI 1471947 0808VE06-45 8 8 M3 X 6 45 4997220 1008VE10-45 10 8 M4 X 10 4997244 2020VE18-60 20 20 4997256 2515VE18-45 25 4997268 2515VE18-60 4997270 Fibet VE Mounts Stiffness IRHD (DaN/mm) Page 1 of 1 Issue 1