Bushes and Shanks with full plain Pin-Plate Characteristics 7h Prepared hole diameter: 7h Final hole diameter for HAL surface 7h Final diameter for chemical surfaces (e.g. tin) 7h Not suitable for soldering 1.60 mm 1.45 mm ±0.05 mm 1.475 mm ±0.05 mm 7h Available with threaded shank or threaded hole Dimensions (mm) Dimensions Threaded Shank Power Elements Order Code 140 Four corners a (mm) b (mm) Pins c (mm) d (mm) e Format Type Type shank 746 100 1 7 15.5 3.5 8 M5 9 I 746 109 3 7 9.5 3.5 4 M3 9 I bush 746 109 4 7 11 3.5 5 M3 9 I shank 746 109 5 9 10.5 3.5 4 M4 16 J bush 746 109 6 7 12.5 3.5 6 M4 9 I shank 746 114 7 9 10.5 3.5 4 M5 16 J bush 746 138 3 9 16 3.5 8 M5 16 J shank 746 109 7 10 14 3.5 7 M6 16 J bush 746 109 8 13 19 3.5 10 M6 25 K shank 746 109 9 13 17 3.5 8 M8 25 K bush 746 071 9 13 24 3.5 13 M8 25 K shank 746 106 1 16 21 3.5 10 M 10 36 L bush 746 110 0 16 27.5 3.5 16 M 10 36 L shank Illustration of hole I Illustration of hole J Illustration of hole K Illustration of hole L www.we-online.com Dimensions Threaded Hole 02/11