REVISIONS PART NO. AG Series - EG Series AG12SR AG20SR AG16SR This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC PRO POWER is the registered trademark of the Group. © Premier Farnell plc 2009. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. ECN # REV DESCRIPTION - A RELEASED AG-25SR CHECKED BY: DATE: 17/11/09 SIZE DATE: 01/12/09 SCALE: NTS Farnell CHECKD DATE APPRVD DATE Jagan 17/11/09 Farnell 01/12/09 EG9SR DRAWING TITLE: DATE: 17/11/09 APPROVED BY: DATE Sreejesh 17/11/09 EG7SR DRAWN BY: Veena Jagan DRAWN Nylon Cable Gland (With Strain Relief) A DWG NO. P10002412 U.O.M.: mm REV ELECTRONIC FILE A AG-12SR_DWG SHEET: 1 OF 3 REVISIONS PART NO. AG Series - EG Series EG11SR EG16SR EG13.5SR This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC PRO POWER is the registered trademark of the Group. © Premier Farnell plc 2009. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. ECN # REV DESCRIPTION - A RELEASED CHECKED BY: DATE: 17/11/09 SIZE DATE: 01/12/09 SCALE: NTS Farnell Sreejesh 17/11/09 CHECKD DATE APPRVD DATE Jagan 17/11/09 Farnell 01/12/09 DRAWING TITLE: DATE: 17/11/09 APPROVED BY: DATE EG21SR DRAWN BY: Sreejesh Jagan DRAWN Nylon Cable Gland (With Strain Relief) A DWG NO. P10002412 U.O.M.: mm REV ELECTRONIC FILE A AG-12SR_DWG SHEET: 2 OF 3 REVISIONS PART NO. AG Series - EG Series ECN # REV DESCRIPTION - A RELEASED DRAWN DATE Sreejesh 17/11/09 CHECKD DATE APPRVD DATE Jagan 17/11/09 Farnell 01/12/09 Part Number Table Description Part Number Cable Gland, Spiral, M12x1.25, PK50 AG12SR Cable Gland, Spiral, M16x1.5, PK50 AG16SR Cable Gland, Spiral, M20x1.5, PK50 AG20SR Cable Gland, Spiral, M25x1.5, PK25 AG-25SR Cable Gland, Spiral, PG7, PJ50 EG7SR Cable Gland, Spiral, PG9, PK50 EG9SR Cable Gland, Spiral, PG11, PK50 EG11SR Cable Gland, Spiral, PG13.5, PK50 EG13.5SR Cable Gland, Spiral, PG16, PK50 EG16SR Cable Gland, Spiral, PG21, PK25 EG21SR http://www.farnell.com http://www.newark.com http://www.cpc.co.uk This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC PRO POWER is the registered trademark of the Group. © Premier Farnell plc 2009. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWING TITLE: DRAWN BY: Sreejesh DATE: 17/11/09 CHECKED BY: DATE: 17/11/09 SIZE DATE: 01/12/09 SCALE: NTS Jagan APPROVED BY: Farnell Nylon Cable Gland (With Strain Relief) A DWG NO. P10002412 U.O.M.: mm REV ELECTRONIC FILE A AG-12SR_DWG SHEET: 3 OF 3