“Stay Connected with Heyco” Liquid Tight Cordgrips ALL NEW PRODUCTS! HEYCo-molded™ Liquid Tight Break-Thru Plugs Mounting Hole Diameter Range: .500˝ (12,7 mm) to 1.093˝ (27,8 mm) PANEL DIMENSIONS CABLE DIA. RANGE PART DESCRIPTION PART DIMENSIONS Mounting NO. A B Thickness at Locking Hole Head Overall Diameter* Black Diameter Height Finger Steps mm. in. mm. in. mm. in. mm. in. mm. in. 12,7 .080 - .200 2,0 - 5,1 C2008 LTBP 500-063 .92 23,4 .500 0,5 .020 .625 15,9 .130 - .375 3,3 - 9,5 C2012 LTBP 625-063 1.03 26,2 0,8 .032 .750 19,1 .175 - .400 4,4 - 10,2 C2016 LTBP 750-063 1.15 29,2 .040 1,0 .32 8,1 22,2 .130 - .450 3,3 - 11,4 C2020 LTBP 875-063 1.28 32,5 .875 .048 1,2 25,4 .200 - .715 5,1 - 18,2 C2022 LTBP 1000-063 1.43 36,3 1.000 1,6 .063 27,8 .250 - .765 6,4 - 19,4 C2024 LTBP 1093-063 1.53 38,9 1.093 Standard color black. Consult Heyco for other colors. *Consult Heyco for other Mounting Hole Diameters. Our Axcell Rapid Response Team is ready to meet your requirements. A Materials Flammability Rating Temperature Rating IP Rating B Nylon 6/6 and TPE HB -40°F (-40°C) to 212°F (100°C) IP 67/68 1-800-526-4182 • 732-286-1800 (NJ) • FAX: 732-244-8843 • www.heyco.com • These co-molded nylon and elastomer parts function as Liquid Tight Plugs with an IP 67/68 rating, yet can be pierced by round wire, cable or tubing to function as Liquid Tight Bushings with the same resulting IP 67/68 rating. • For use in panels as thin as .020˝ (0,5 mm) and as thick as .063˝ (1,6 mm). Parts for thicker panels are under development. • Provide liquid tight closure when used as a plug. When pierced, functions as a liquid tight bushing that converts raw edged holes to smooth, neat, insulated holes. • Used as a liquid tight bushing, HEYCo-molded Liquid Tight Break-Thru Plugs insulate and mechanically protect electrical and telecommunications cable, tubing, hose, rope, and utility lines. • Locking fingers snap into holes with fingertip pressure. • Locking fingers in fractional increments up to the maximum panel thickness. • Withstands a push back force of greater than 35 pounds. • Available in multiple sizes for use in .500˝ (12,7 mm) to 1.093˝ (27,8 mm) diameter holes. Quick Specs 3-34