Connectors for mains connection IEC 60947-5-2 CA-series Product description Robust, universal circular connector for machinery engineering in general, control engineering, electrical medical equipment as well as for the chemical industry. • International approvals for worldwide use: VDE, UR, SEV, CSA Type • Housings made of impact-resistant plastic with screw locking system for troublefree, permanent connections • Easy handling for a quick assembly with integrated strain relief • Useful in industry due to protection against dust and water Basic data Operating voltage: 250 V AC / DC, (400 V AC 3-pole) Operating current: 10 A AC / DC (at 20° C), 16 A AC 3-pole (at 20° C) Protection class: IP 67 Pollution severity class: 3 Strain relief by means of cable: 6 mm-12 mm Contact surface: Cu Zn Number of poles Description Order no. 3 + PE Cable connector 934 124-100 Type of connection: screw Conductor cross-section: max. 1.5 mm2 Operating voltage: 250 V DC / 400 V AC Operating current: 10 A DC / 16 A AC CA 3 LS 3 + PE Cable socket 934 125-100 Type of connection: screw Conductor cross-section: max. 1.5 mm2 Operating voltage: 250 V DC / 400 V AC Operating current: 10 A DC / 16 A AC CA 3 LD 3 + PE Cable connector 934 128-100 Type of connection: screw Conductor cross-section: max. 1.5 mm2 Operating voltage: 250 V DC / 400 V AC Operating current: 10 A DC / 16 A AC CA 3 W LS 3 + PE Cable socket Type of connection: screw Conductor cross-section: max. 1.5 mm2 Operating voltage: 250 V DC / 400 V AC CA 3 W LD 6 Industrial connectors Operating current: 10 A DC / 16 A AC 934 129-100