ARINC 404
DPX
DPXA - Single Shell DPX
DPXA connectors are one-piece shell miniature
rack/panel connectors. The construction offers
high strength and maximum utilization of insert area
for contact arrangements accommodating up to 106
contacts. Shells are keystone-shaped for polarization. Operating temperature for the DPXA is
-54.2˚C to +125˚C (-67˚F to +257˚F).
DPXB - Polarized ARINC Shell
DPXB connectors are DPXA connectors with an
ARINC B shelf. Additional polarization is provided
by three hexagonal polarizing posts.
DPXA-34
DPXB-33
DPX2-34B
DPX2-33B
DPX2 - Two Gang DPX Series
DPX2 connectors are the original two-gang versions
of the DPX, and are made of the same materials and
accommodate the same contact arrangements.
Keystone shaped shells accommodate two DPX
inserts with up to 212 contacts. The DPX2 has
three polarizing posts with 99 polarizing positions.
DPX2 - A - ARINC A Shell
DPX2-A connectors are DPX2 connectors with an
ARINC A shell. This shell type has the receptacle
flange placed .344 (8.74) from the front of the
engaging portion of the shell, and short aluminum
alloy polarizing posts permit polarization before
contacts engage.
DPX2-B - ARINC B Shell
DPX2-B connectors supersede the DPX2-A and
have an ARINC B Shell. This Shell type has the
receptacle flange placed .060 (1.52) from the front
of the engaging portion of the shell, and polarizing
posts permit polarization before the shells engage.
DPX3 - Three Gang DPX Series
DPX3 connectors are three-gang versions of the
DPX, made of the same materials, and accommodate the same contact arrangements. The threegang version can therefore accommodate up to a
total of 318 in the keystone shaped shells, with
three polarizing posts that are capable of providing
up to 99 polarizing positions.
DPX4 - Four Gang DPX Series
DPX4 connectors are four gang versions of the DPX,
made of the same materials, and can accommodate
four separate arrangements that can total up to
424 contacts. The DPX4 has three polarizing posts
with 99 polarizing positions.
DPX3-34
DPX4-33
DPX*MA - LITTLE CAESAR' Contact Assembly
DPX*MA connectors are DPX connectors with the
LITTLE CAESAR contact assembly for rear insertion, release, and extraction of crimp type contacts. Insertion requires no tool; extraction requires
an expendable plastic tool. A hard dielectric,
closed-entry socket insert has lead-in chamfers for
positive mating of contacts. Contacts are crimpable
with the M22501 tool.
DPX*ME - Environmental with LITTLE CAESAR
Contact Assembly
DPX*ME connectors are DPXMA connectors with
environmental interfacial and grommet seals, and
olive drab shell finish.
Performance and Material Specifications (DPXA/DPXB/DPX*MA/DPX*ME)
Shell
Insulator
Contacts
Polarizing Posts
Screws & Lockwashers
Seals
DPXA/DPXB/DPX2
DPX*MA/DPX2*MA/ME
Specifications
Aluminum alloy
Aluminum alloy
QQ- A-591/A380
Finish
Cadmium plate with yellow chromate
Cadmium plate with yellow chromate for MA: olive drab for ME
QQ-P-416
Material
Melamine or Phenolic
Diallyl phthalate or epoxy
MIL-M-14
Material
Copper alloy
Copper alloy
QQ-C-533
Finish
Gold
Gold
MIL-G-45204
Termination
Solder Pot
Crimp
N/A
Material
Die Cast
Die cast
Finish
Cadmium
Cadmium
Material
Steel
Steel
QQS-630-637
Finish
Cadmium Plate
Cadmium plate
QQ-P-416
Material
N/A
Silicone
N/A
Material
www.ittcannon.com
43
QQ-P-416
ARINC 404
DPX
How to Order
DPXA/DPXB
DPX
A
DPX
B
R
MA -
32C2
- 34
P
-1
67
- 33
S
- 00
01
- F0
SERIES PREFIX
SHELL STYLE
RoHS
CLASS
CONTACT ARRANGEMENT
SHELL TYPE
CONTACT TYPE
MODIFICATION
POLARIZING POSITION
LESS CONTACTS*
SERIES PREFIX
CONTACT ARRANGEMENT
2 thru 106 (see pages 52-56)
DPX - ITT designation
SHELL STYLE
SHELL TYPE
33 for plug; 34 for receptacle
A - Single shell
B - Polarized ARINC shell
CONTACT TYPE
RoHS version
P for pin: S for socket
R - RoHS compatible
MODIFICATION
CLASS
No designator - Solder type
DPXA - See page 68-71
DPXB - See pages 68-71
MA - Crimp type with LITTLE CAESAR contact
assembly
POLARIZING POSTION
ME - Environmental crimp type
MB - Wire seperator
MK - Mounting springs
For DPXB shell style only
DPX2
DPX
2
DPX
2
DPX
2
R
57
P
- 57
P
- 33
B
- 00 01
MA
57
P
- 57
P
- 33
A
- 03 01
MA
57
P
- 57
P
- 34
B
- 02 01
- F0
SERIES PREFIX
TWO GANG SHELL
RoHS
CLASS
CONTACT ARRANGEMENT
(Side A)
CONTACT TYPE
CONTACT ARRANGEMENT
(Side B)
CONTACT TYPE
SHELL TYPE
SHELL STYLE
MODIFICATION NUMBER
POLARZING POSITION
LESS CONTACTS*
SERIES PREFIX
DPX - ITT Cannon designation
SHELL
2 - Two gang
RoHS
R - RoHS compatible
CONTACT ARRANGEMENT
2 thru 106 (see pages 52-56)
SHELL STYLE
No designator - original two-gang DPX
A - ARINC A shell
CONTACT TYPE
P for pin; S for socket
B - ARINC B shell
MODIFICATION
SHELL TYPE
33 for plug; 34 for receptacle
CLASS
See pages 68-71
POLARIZING POSITION
No designator - Solder type
See pages 71-72
MA - Crimp type with LITTLE CAESAR contact
www.ittcannon.com
44
ARINC 404
DPX
How to Order
DPX3/DPX4
DPX
3
ME
- 57
P
- 57
P
- 57
P
DPX
4
ME
- 57
P
- 57
P
- 57
P
- 57
P
- 34
- 00
01
- 34
- 00
01
SERIES PREFIX
SHELL
CLASS
CONTACT ARRANGEMENT
(Side A)
CONTACT TYPE
CONTACT ARRANGEMENT
(Side B)
CONTACT TYPE
CONTACT ARRANGEMENT
SERIES PREFIX
DPX - ITT designation
SHELL
3 - Three gang
(Side C)
CONTACT TYPE
CONTACT ARRANGEMENT
4 - Four gang
(Side 0)
CLASS
CONTACT TYPE
MA - Crimp type contacts in LITTLE CAESAR
contact assembly
ME - Environment- resistant, crimp type contacts
SHELL TYPE
*CONTACT ARRANGEMENT
POLARIZING POSITION
**CONTACT TYPE
SHELL TYPE
P for pin; S for socket. Designation follows each
33 for plug; 34 for receptacle
See pages 52-56 for applicable arrangements.
Please specify each arrangement number as indicated in ordering nomenclature for 3 or 4 gang if
not listed below.
DPXMA/ME
MODIFICATION NUMBER
arrangement as ordered for 3 or 4 gang versions.
MODIFICATION See pages 68-71
POLARIZING POSITION See pages 71-72
DPXMA/DPXME - 0PX - 3 Shell Layouts
Insert - Used in shell position as noted
Layout
MA:
W8
32W4
57
67
A106
ME:
AW8
A32W4
57
67
A106
*E24
A,B,C
*F122
A,B
G122
B
*E142
C
C
A,C
A,B
A,B
C
*A166
A,B,C
171
A,B,C
201
A
C
*C205
B
B240
A,C
B
C240
A,B
C
C
*D244
A,B
C
A279
A,B
A,B,C
A318
*Applicable to "ME" only. Consult factory for similar layouts application to "MA."
NOTE: For pictorial views of above layouts see pages 52-56.
DPXMA/DPXME - 0PX - 4 Shell Layouts
Insert - Used in shell position as noted
Layout
MA:
W8
26
32W4
57
67
A106
None
ME:
AW8
26
A32W4
57
67
A106
None
A,B,C
145
*B148
C,D
B150
A,B
D
B
A
A,C
C,D
*181
B
A
C
*B189
C,D
B
A
C,D
*A198
A,B,C
D
A,B
A,B,C,D
268
*E287
D
*220
B
B
A
*A233
279
*F287
B
*E326
B
A,C
C,D
A
A
C,D
B
A
C,D
B,C,D
A,C,D
A346
C,D
A,B
B346
A,B
C,D
385
A
B,C,D
A,B,C,D
A424
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
45
ARINC 404
DPX
Single Gang
DPXA-33
All tolerances +_ .015(0.38) unless otherwise noted.
1.614 +
_.006
(41.00 +
_ 0.15)
.120 (3.05)DIA.
4MTG. HOLES
2.312
(58.73)
1.125
(28.58)
.750 +
_.005
(19.05 +
_ 0.13)
1.060
(26.92)
.995 +
_.005
(25.27 +
_ 0.13)
.125 (3.18)
.125 R.TYP
(3.18)
2.062 +
_.005
(52.38 +
_ 0.13)
.750 (19.05)
DPXA-34
1.750 +
_.016
(44.45 +
_ 0.41)
1.125 +
_.015
(28.58 +
_ 0.38)
.187 R.TYP
(4.75)
1.157 (29.39)
.120 (3.05)DIA.
4MTG. HOLES
2.312 (58.73)
.782 (19.86)
.750 +
_.005
(19.05 +
_ 0.13)
.125 (3.18)
.125 R.TYP
(3.18)
2.062 +
_.005
(52.38 +
_ 0.13)
.344 (8.74)
DPXA-33 ARINC Shell
TWO HOLES
.120 (3.05) DIA. FOR
MTG. REF. ONLY
2.000 (50.80)
MAX.GROMMET
EXTENSION
MTG.DATUM
.766
(19.46)
.720 +
_.005
(18.29 +
_ 0.13)
2.047
(52.00)
.954
(24.23)
1.720 +
_.005
(43.69 +
_ 0.13)
POLARIZING POST
.718 +
_.005
(18.24 +
_ 0.13)
1.541 (39.14) MAX.
2.320 (58.93) MAX. WITH COAX
NOTE: DPXME AND
DPXNE GROMMETS ARE
APPLICABLE TO ALL
SHELL SIZES
.120 (3.05) & C' SUNK
82 X.230 (5.84) DIA.
4 HOLES
.125 (3.18)
1.437 (36.50)
REF.
DPXA-34 ARINC Shell
TWO HOLES .120 (3.05)
DIA. FOR MTG.
REF. ONLY
1.750 +
_.005 TYP.
(44.45 +
_ 0.13)
MAX.GROMMET
EXTENSION
1.061
(26.95)
.120 (3.05) DIA.
4 MTG. HOLES
MTG.DATUM
1.634 (41.50) MAX.
2.413 (61.29) MAX. WITH COAX
.720 +
_.005
(18.29 +
_ 0.13)
2.012
(51.11)
1.405
(35.69)
1.720 +
_.005
(43.69 +
_ 0.13)
3 POLARIZING
KEYS
.060
(1.52)
2.000 (50.80)
.718 +
_.005
(18.24 +
_ 0.13)
.125
(3.18)
NOTE - ARINC requires that DPXB shells are mounted with the
polarizing posts at the top. See pages 71-72
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
46
ARINC 404
DPX
Two Gang
DPX2-33 Shell
All tolerance are +_ .015 (0.38) unless otherwise noted.
2.062 +
_ .005
(52.38 +
_ 0.13)
.063 (1.60)
2.312(58.73)
CENTER
POLARIZING
POST
A
.375 TYP.
(9.52)
TOP
.750 +
_ .005 TYP.
(19.05 +
_ 0.13)
B
TWO
POLARIZING
POSTS
8 HOLES .120 (3.05) DIA.
FOR #4-40 SCREWS
MTG. DATUM
.988 +
_ .005
(25.09 +
_ 0.13)
3.063
2.438 +
_ .010 (77.80)
(61.92 +
_ 0.25)
JUNCTION
SHELL TABS
SHOWN FOR
REF.
.766
(19.46)
.188 (4.78) R. TYP.
.125 (3.18)
DPX2-34 Shell
2.312(58.72)
1.750 +
_ .010
(44.45 +
_ 0.41)
2.062 +
_ .005
(52.38 +
_ 0.13)
.125 (3.18)
.063 (1.60)
CENTER
POLARIZING
POST
3.063
2.438 +
_ .010
(61.93 +
_ 0.25) (77.80)
TWO
A
.375 +
_ .005 TYP.
(9.52 +
_ 0.13)
TOP
.750 +
_ .005 TYP.
(19.05 +
_ 0.13)
B
POLARIZING
POSTS
1.125
(28.58)
2.814 +
_ .010
(71.48 +
_ 0.41)
JUNCTION
SHELL TABS
SHOWN FOR
REF.
.344 (8.74)
8 HOLES .120 (3.05) DIA.
FOR #4-40 SCREWS
MTG. DATUM
.188 (4.78) R. TYP.
1.016
(25.81)
DPX2-33A ARINC A Shell
1.437 +
_ .005
(36.50 +
_ 0.13)
.718 +
_ .005
(18.26 +
_ 0.13)
.766 (19.46)
.125 (3.18)
TOP
.720 +
_ .005
(18.20 +
_ 0.13)
TYP.
A
2.783 +
_ .005
(70.69 +
_ 0.13)
2.000
(50.80)
.188 (4.78) R. TYP.
JUNCTION
SHELL TABS
SHOWN FOR
REF
.988 +
_ .005
(25.10 +
_ 0.13)
3.110
(78.99)
B
3 POLARIZING
POSTS
MTG. DATUM
.954 +
_ .005
(24.23 +
_ 0.13)
6 HOLES .120 (3.05) DIA.
FOR #4-40 SCREWS
DPX2-34A ARINC A Shell
2.000 (50.80)
.188 (4.78) R. TYP.
1.015
(25.78)
1.750 +
_ .016
(44.45 +
_ 0.41)
.344 (8.74)
A
TOP
.720 +
_ .005 TYP.
(18.20 +
_ 0.13)
FLOATING EYLETS
.116 (2.95) I.D.
FOR #4-40 SCREWS
SHOWN FOR REF.
2.783 +
_ .005
(70.69 +
_ 0.13)
2.468 +
_ .010
(62.69 +
_ 0.25)
3.109
(78.97)
B
3 POLARIZING
POSTS
1.437 +
_ .005
(36.50 +
_ 0.13)
JUNCTION
SHELL TABS
SHOWN FOR
REF.
1.125
(28.58)
MTG. DATUM
www.ittcannon.com
47
.125 (3.18)
ARINC 404
DPX
Two Gang - ARINC B Shell
DPX2-34B
DPX2-33B
2 HOLES .120(3.05)DIA.
FOR MTG.REF.ONLY
.120 (3.05)DIA. & C' SUNK
82 X .230 (5.84) DIA. 4 HOLES
SHOWN FOR REF.
.766
(19.46)
All tolerances are +_ .015(0.38) unless other wise noted.
1.750 +
_.015
(44.45 +
_ 0.38)
2 HOLES .120 (3.05)
DIA. FOR MTG.
REF.ONLY
.125 (3.18)
TOP
A
.3.075
(78.10)
.988 +
_.004
_ 0.10)
(25.10 +
3 POLARIZING
KEYS
2.783 +
_.005
_ 0.13)
(70.69 +
B
2.468 +
_.015
(62.69 +
_ 0.38)
+
+
B
3 POLARIZING
POSTS
2.783 +
_.005
(70.69 +
_ 0.13)
MTG.DATUM
.125 (3.18)
TOP
A
3.110
(78.99)
.060 (1.52)
.188 (4.78) R. TYP.
.720 +
_.005
(18.29 +
_ 0.13)
.720 +
_.005
(18.29 +
_ 0.13)
.954
(24.23)
.188 (4.78)R. TYP.
.718 +
_.005
(18.24 +
_ 0.13)
.718 +
_.005
(18.24 +
_ 0.13)
2.000
(50.80)
1.061
(26.95)
4 MTG. HOLES
.120 (3.05) DIA. FOR
#4-40 SCREWS
MTG DATUM
1.437 (36.50)
REF
1.437 (32.50)
REF
2.000 (50.80)
Two Gang - Screw Coupling
DPX2-33F (Female)
DPX2-34M (Male)
2.312 (58.72)
2.312(58.72)
1.016 (25.81)
.344 (8.74)
2.814 +
_.016
(71.48 +
_ 0.41)
COUPLING
NUT
.988 +
_.005
(25.09 +
_ 0.13)
1.750 +
_.016
(44.45 +
_ 0.41)
.063
(1.60)
2.438 +
_.006
(61.92 +
_ 0.15)
B
TOP
TOP
TWO
POLARIZING
POSTS
.750 +
_.005
(19.05 +
_ 0.13)
TYP.
A
2.438 +
_.010
(61.92 +
_ 0.25)
COUPLING
SCREW
1.125
(28.58)
SEE DPX2-33M
FOR DETAILS
TWO
POLARIZING
POSTS
.750 +
_.005
(19.05 +
_ 0.13)
TYP.
B
2.676 +
_.016
(67.97 +
_ 0.41)
3.063
(77.80)
2.062 +
_.006
(52.38 +
_ 0.15)
3.063(77.80)
1.612 +
_.005
(40.94 +
_ 0.13)
.063
(1.60)
A
2.062 +
_.006
(52.38 +
_ 0.15)
.766 (19.46)
.125 (3.18)
.375 +
_.005
(9.52 +
_ 0.13)
8 HOLES .120(3.05)DIA
FOR #4-40 SCREWS
.125 (3.18)
8 HOLES .120 (3.05) DIA
FOR #4.40 SCREWS
.375 +
_.005
(9.52 +
_ 0.13)
.188 (4.78) R. TYP
.188 (4.78) R. TYP
DPX2-33M (Male)
DPX2-34F (Female)
2.312 (58.72)
2.312 (58.72)
.766 (19.46)
1.016 (25.81)
2.062 +
_.006
(52.38 +
_ 0.15)
1.612 +
_.005
(40.84 +
_ 0.13)
.063
(1.60)
2.438 +
_.005
(61.92 +
_ 0.13)
A
.063
(1.60)
2.814 +
_.016
(71.48 +
_ 0.41)
3.063
(77.80)
1.750 +
_.016
(44.45 +
_ 0.14)
.344 (8.74)
2.676 +
_.016
_ 0.41)
(67.97 +
TOP
.750 +
_.005
(19.05 +
_ 0.13)
TYP.
.988
(25.09)
.125
(3.18)
375 +
_.005
(9.52 +
_ 0.13)
8 HOLES .120(3.05)DIA
FOR #4-40 SCREWS
2.438 +
_.010
(61.92 +
_ 0.25)
COUPLING
SCREW
.125(3.18)
.188(4.78) R. TYP.
A
TOP
TWO
POLARIZING
POSTS
B
COUPLING
NUT
1.125
(28.58)
3.063 (77.80)
B
2.062 +
_.006
(52.38 +
_ 0.15)
.375 +
_.005
(9.52 +
_ 0.13)
8 HOLES .120 (3.05) DIA
FOR #4-40 SCREWS
TWO
POLARIZING
POSTS
.750 +
_.005
(19.05 +
_ 0.13)
TYP.
1.88(4.78) R. TYP.
STANDARD SUPPLIED WITH HEX. SLOTTED KNOB
Engaging Devices
DPX2-34M with wing handle type
-0901; example, DPX2-34M-0901
DPX2-34M with extended hex,
knob type -0501; example, DPX2-34M-0501
3.725
(94.62)
MAX.
2.256
(57.30)
MAX.
2.032
(51.61)
.
N
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
48
ARINC 404
DPX3/DPX4
Two Gang - ARINC B Shell
DPX3-34
DPX3-33
All tolerances are +_ .015(0.38) unless other wise noted.
.766 (19.46)
2.000
(50.80)
1.061
(26.95)
2.000
(50.80)
.125 (3.18)
1.612
(40.94)
1.750
(44.45)
.060 (1.52)
4.354
(110.59)
4.318
(109.68)
4.026
(102.26)
3.711
(94.26)
4.026
(102.26)
MTG. DATUM
MTG. DATUM
.988
(25.10
.180 R. TYP.
(4.57)
.718
(18.24)
.718
(18.24)
.282
(7.16)
.282 (7.16)
1.437
(36.50)
6 MTG HOLES
.120 (3.05) DIA.
.125 (3.18)
1.437
(36.50)
Four Gang
DPX4-33
DPX4-34
.766 (19.46)
3.860
(98.04)
3.610 (91.69)
1.612
(40.94)
2.783
(70.69)
3.110
(78.99)
MTG. DATUM
1.648
(41.88)
.180 R. TYP.
(4.57)
2.783
(70.69)
.930
(23.62)
10 MTG HOLES
.120 (3.05) DIA.
.282 (7.16)
MTG.DATUM
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
49
.060(1.52)
2.468
(62.69)
3.075
(78.10)
.988
(25.10)
.930
(23.62)
1.061
(26.95)
3.860 (98.04)
.125 (3.18)
1.648
(41.86)
.125 (3.18)
.282 (7.16)
ARINC 404
DPX
Contact Arrangement Variations Solder Type (Captive Contacts)
NOTE: See pages 59-60 for Coaxial/Power Contact Termination Data
PIN
C2
Test
Contact
Contacts
Voltage
Contacts
No. of
Type
Contact
No. of
Type
Contact
Arr.
& Wire size
AC (RMS)
Arr. No.
Contacts
Code
Numbers
Contacts
Code
Numbers
2 coax
(RG-9/U)
1000 (1,2)V
matched
impedance
C2
2
R
1-2
2
R
1-2
C2
C2C
2
AB
1-2
Contact
C2M
C7
C7
8*
10C3*
C7
7 coax
1000 (1-7)V
8
8 #12
2000V
10C3
7 #20
3 coax
1500
(1-4,
8-10)V
13 #16
3 coax
1500
(4-16)V
1000
(1-3)V
C7B
7
C7B
1-2
1-7
4
F
1,2,4,5
3
G
A
1-7
3,6,7
B
1-7
Same as Pin
Same as Pin
7
K
7
C
1-7
Same as Pin
7
AA
1-7
Same as Pin
C7AA
7
Z
1-7
Same as Pin
8
N
1-8
8
10C3
7
L
1-4, 8-10
3
l
5,6,7
7
L
1-4, 8-10
3
J
5,6,7
13
M
4-16
3
A
1-3
13
M
4-16
3
B
1-3
13
M
4-16
3
C
1-3
13
M
4-16
3
K
1-3
13
M
4-16
3
Z
1-3
13
M
4-16
3
AA
1-3
A10C3
G16C3
J16C3
0
1-8
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
17
17 #20
2000V
17
17
L
1-17
Same as Pin
23
23 #20
2000
(15-23).
1500
(1-14)V.
23
23
L
1-23
Same as Pin
25C3
22
L
4-25
3
K
1-3
F25C3
22
L
4-25
3
C
1-3
22
L
4-25
3
A
1-3
22
L
4-25
3
B
1-3
22
L
4-25
3
Z
1-3
22
L
4-25
3
AA
1-3
25C3
22 (#20).
3 coax
1500
(4-25)V.
1000
(1-3)V
J25C3
Q25C3
R25C3
1-7
(Use C7)
C7X
G25C3
25C3*
AC
C7M
ZF16C3
23
K
Consult Factory
2
Same as Socket
ZE16C3
17
7
7
C16C3
B16C3
Contact
Consult Factory
C7A
B16C3
B16C3*
SOCKET
No. of
22
2
1
L
F
G
4-25
1,3
2
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
50
ARINC 404
DPX
Contact Arrangement Variations Solder Type (Captive Contacts)
NOTE: See pages 59-60 for Coaxial/Power Contact Termination Data
PIN
6
5
13
12
26*
17
4
12
21
2
10
8
32
5
13
23
32
27
30
5
16
30
6
14
12
7
29
28
57*
40C1
25
34
3
11
33
2
9
8
18
17
35
34
33
32
31
30
29
28
27
26
45
44
43
42 41
40
39
38
37
36
8
47
25
46
45
55
7
6
42 41 40
44
54
43
53
32
15
11
4
L
M
Z
1,6 14-26
2-5, 7-13
27-30
Same as Pin
1500 (2-5
& 7-13)V
1000 (1,6
& 14-26)V
B30C4
15
11
4
L
M
AA
1,6 14-26
2-5, 7-13
27-30
Same as Pin
C30C4
15
11
4
L
M
A
1,6 14-26
2-5, 7-13
27-30
Same as Pin
32
29
3
L
M
1,3,4,7-32
2,5,6
Same as Pin
32C2
30
2
L
K
1-30
A1, A2
A32C2
30
2
L
A
1-30
A1, A2
Same as Pin
C32C2
30
2
L
B
1-30
A1, A2
Same as Pin
D32C2
30
2
L
C
1-30
A1, A2
Same as Pin
M32C2
30
2
L
Z
1-30
A1, A2
Same as Pin
N32C2
30
2
L
AA
1-30
A1, A2
Same as Pin
40
40
L
1-40
Same as Pin
40C1
39
1
L
B
1-39
A1
Same as Pin
13
3
52 51 50 49 48 47
1500
(1-30)V
1000
(A1, A2)V
2
30
2
L
F
A40C1
39
1
L
K
1-39
A1
1500
(1-39)V
1000
(A1)V
F40C1
39
1
L
C
1-39
A1
Same as Pin
J40C1
39
1
L
Z
1-39
A1
Same as Pin
K40C1
39
1
L
AA
1-39
A1
Same as Pin
L40C1
39
1
L
A
1-39
A1
Same as Pin
39
1
L
F
45 #20
1500V
45
45
L
1-45
Same as Pin
29
57
57 #20
1500V
57
57
L
1-57
Same as Pin
64 #20
3 #16
1000V
67
64
3
L
M
1-2,6-65
3-5
Same as Pin
48
1
9
8
33 32 31 30
46 45 44 43
59
1500V
39
21 20 19 18
39 38 37 36 35 34
67 66 65 64 63 62 61 60
40
11 10
12
45
20
30
51 50 49
26 25 24 23 22
2000
(1-6)
1500
(7-32)V
10
21
31
42 41
52
4
5
17 16 15 14
29 28 27
A30C4
1
11
12
22
33
16
2
3
13
14
24 23
34
36 35
4
5
15
16
26
56
54 53
6
7
17
27
37
38
Same as Pin
1
10
20 19
18
39 #20
1 coax
32
21
57
67*
A1
14
35
4
40 #20
8
9
26
12
40
20
22
14
9
1-26
1
24 23
28
M
Contact
Numbers
1-30
A1, A2
32
33
2
36
5
15
24
25
19
26
No. of
Contacts
7
16
25
34
15
27
13
8
17
10
21
37
6
9
3
16
22
38
7
26
1500V
Contact
Numbers
1
35
11
17
30 #20
2 coax
25
26
4
23
21
18
36
12
18
32C2
2
27
3 #16
29 #20
A1
26
10
19
5
39
45*
11
37
13
24
30
No. of
Contacts
1
13
3
32
24
17
27
28
6
19
15 #20.
11 #16,
4 coax
7
22
20
25
2
14
4
38
15
18
28
29
39
31
19
7
16
26
8
23
21
30
40C1*
9
15
5
13
22
40
10
29
8
17
27
3
20
24
9
18
28
11
32C2*
31
19
4
12
23
30C4
3
10
20
29
6
40*
11
21
A2
4
12
22
31
Contact
Type
Code
Contact
Arr. No.
1
6
14
26 #16
7
28
2
26
SOCKET
Contact
Type
Code
1
9
29
Contact
Arr.
Test
Voltage
AC (RMS)
20
23 22 21 20 19 18 17 16 15 14
30
15
7
14
22
3
11
26 25 24
8
15
23
5
1
9
16
24
6
2
10
18
25
13
3
11
19
26
30C4
4
No. of
Contacts
& Wire Size
67
58 57 56 55
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
51
1-39
A1
ARINC 404
DPX*MA/ME
Contact Arrangement Variations, Crimp Type - DPX*MA/ME Series
NOTE: See pages 62-65 for Coaxial Contact data
See pages 57-58 for Crimp Contact data
4
3
2
1
8
7
6
5
4
3
2
1
8
7
6
5
8
D8
2
1
4
W8**
No. of Contacts
& Wire Size
8
D8
7
Test Voltage
AC (RMS)
Contact
Arr. No.
No. of
Contacts
8 #12
8
8
12
1-8
4 #16, 4 #12
D8
4
16
12
1-4
5-8
W8
coax
W8**
G
(For MA)
C8B
8 coax
1000V (1-8)V
10
10
4
9
8
3
4
8
5
2
3
7
10W3**
9
16
12
11
25W3
15
7 #20, H.D.,
3 coax
13 #16, 3 coax
B16W3
25
24
23
6
26
19
26
11
24
20
23
18
2
9
16
4
10W3
7
3
20 H.D.
coax
1500
(1-4, 8-10)V
A10C3
7
3
20 H.D.
AC
B10C3
7
3
20 H.D.
AC
1500 (4-16)
1000 (1-3)V
socket side only
(Not avaiable
in ME series)
B16W3
13
3
16
coax
25W3
22
3
20
coax
25W3
22 (#20) 3 coax
17
1500 (4-25)V,
1000 (1-3)V
(Not available
in ME series)
25A3
22
3
20
C
25B3
22
3
20
D
25D3
22
3
20
B
26
26
16
1-4, 8-10
5-7
4-16
1-3
4-25
1-3
1
8
7
26
14
15
22
10
11
19
3
10
17
18
25
21
4
5
12
13
22
6
12
13
14
2
1-3, 5,
6, 8-10
4, 7
A10
4
7
8
16
16
1500V
1
2
3
10
5
9
8
8 #16, 2 #4
ONLY
4
5
13
14
1,2
3-10
A10
1
6
7
15
B
20
10
SOCKET
B16W3**
2
8
1500V
8
2
3
8
AB
2 #8, 8 #20
10W3**
6
9
S
C8H
10
1
4
10
R
C8G
9
10
1-8
H
1
5
7
A10
F
8
6
7
2
6
Contact
Numbers
1
3
5
C8C
C8E
(For ME)
2
Contact Size or
Code Letter
C8A
AW8
5
6
8
3
Contact
Arr.
21
26 #16
1500V
1-26
20
**Crimp rear release coaxial contacts.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
52
ARINC 404
DPX*MA/ME
Contact Arrangement Variations, Crimp Type - DPX*MA/ME Series
NOTE: See pages 62-65 for Coaxial Contact data
See pages 57-58 for Crimp Contact data
Contact
Arr.
6
5
4
12
A2
3
11
10
16
32W2
20
30
18
29
A1
13
(For MA)
17
23
22
28 27
A32W2
21
26
Test Voltage
AC (RMS)
32W2**
7
14
19
1
8
15
24
2
9
No. of Contacts
& Wire Size
25
30 #20, 2 coax
1500 (1-30),
1000 (A1,A2)V
(For ME)
Contact
Arr. No.
No. of
Contacts
Contact Size or
Code Letter
32W2
30
2
20
coax
32A2
30
2
20
B
32B2
30
2
20
A
32C2
30
2
20
D
D32C2
30
2
20
J
32F2
30
2
20
P
32G2
30
2
20
C
32W4
4
24
4
coax
20 H.D.
16
32C4
4
24
4
S
20 H. D.
16
4
24
4
4
24
4
H
20 H. D.
16
D32C4
4
24
4
G
20 H. D.
16
E32C4
4
24
4
AA
20 H. D.
16
H32C4
4
24
4
AB
20 H. D.
16
40
40
20
40W1
39
1
20
coax
40B1
39
1
20
B
40F1
39
1
20
P
F40C1
39
1
20
J
45
45
20
B32C4
32W4**
(For MA)
32W4
A32W4
29
10
21
25
36W7
9
23
31
5
4
3
2
12
11
10
9
30
19
20
21
29
22
28
26
27
16
25
37
36
35
34
33
7
6
5
4
3
2
1
12
11
17
40W1
23
30
29
39
7
10
16
22
28
38
6
27
37
5
9
36
4
2
33 32
11
24
23
21
20 19
18
17 16
31
30
29
28
27
26
40 39
38
37
36
44 43
42 41
1-40
39 #20,
1 coax
1500 (1-39)
1000 (A1)V
(For ME)
1-39
A1
1
12
33 32
1500V
A40W1
14 13
35 34
40 #20
(For MA)
15
22
40
40W1**
A1
35 34
10
1000
32
25
3
29 #22
7 coax (Size 5)
15
20
26
36W7**
24
8
14
15
21
20
28
24
38
18
29-32
1-7, 10-22
25-28
8, 9, 23, 24
7
8
17
18
R
20 H. D.
16
1
39
24
45
18
A4
6
13
25
11
A5
13
C32C4
1-30
A1,A2
2 1
A1
26
19
45
4 3
13 12
A6
22
31
5
14
A2
A7
40
6
1500 (1-28),
1000 (29-32)V
(For ME)
27
14
40
7
16 15
A3
23
29
8
17
19
24 #20 H.D.
4 #16, 4 coax
Contact
Numbers
9
8
45
1500V
45 #20
**Crimp rear release coaxial contacts.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
53
1-45
ARINC 404
DPX*MA/ME
Contact Arrangement Variations, Crimp Type - DPX*MA/ME Series
NOTE: See pages 62-65 for Coaxial Contact data
See pages 57-58 for Crimp Contact data
9
19
8
18
28
57
38
7
27
37
47
7
16
26
36
46
56 55
57
6
17
6
17 16 15 14
5
15
25
35
45
3
33
43
5
22
67
42 41 40 39
21
Contact
Arr.
No. of Contacts
& Wire Size
Test Voltage
AC (RMS)
Contact
Arr. No.
No. of
Contacts
Contact Size or
Code Letter
Contact
Numbers
57
57 #20
1500V
57
57
20
1-57
67
64 #20 H.D.
3 #16
1500 (3-5)
1000 (1, 2,
6-67)V
67
64
3
20 H.D.
16
1-2, 6-67
3, 4, 5
A106†
106 #22
1000V
A106
106
22
1-106
20
30
40
3
29 28 27 26 25 24 23 22
10
29
39
50 49 48
51
12
11
31
41
4
13
1
12
32
42
53 52
2
13
24 23
34
44
54
4
14
2
1
11 10 9
8
21 20 19 18
38 37 36 35 34 33 32 31 30
54 53 52 51 50 49 48 47 46 45 44 43
67 66 65 64
12
25
39
A106†
63 62 61 60 59 58
57 56 55
1
13
26
52
66
40
53
79
93
67
80
106
94
**Crimp rear release coaxial contacts.
†A106 arrangements have the POS-ALINE connector design. See below.
NOTE: Engaging force of each layout arrangement shall not exceed 45 lbs. maximum.
Positive Contact Alignment Design
For high density A106 contact arrangement
PLUG INSULATOR
RECEPTACLE INSULATOR
PIN
SOCKET
In the POS-ALIGN connector construction the entire pin contact is recessed in an individual cavity in the
plug insulator while the sturdy socket members are exposed and extend from the connector receptacle face.
There is a lead-in chamfer that guides the socket contact into the pin cavity assuring proper contact
alignment during mating and protecting the pin contact from damage and wear.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
54
ARINC 404
DPX*MA/ME
Contact and Termination Tooling Data - Commercial
Crimp Contacts
The crimp contacts are shipped with the connector,
be purchased separately. The insertion/extraction
not installed. Additional contacts may be ordered
tools listed are plastic type. Consult factory for
using the part numbers listed below. All tools must
more durable metal tools.
Part Number
Contact
Size
2222
Type
DPX MA
Commercial
DPX ME
Commercial
Pin
030-1975-007
030-1975-005
Socket
031-1113-007
031-1113-008
Pin
030-9081-000
030-2040-000
2020
Socket
031-9134-001
031-1046-002
Pin
030-9081-003
030-1892-002
2020HD
Socket
031-9134-004
031-1047-002
Pin
030-9083-001
030-1893-002
1616
1212
0808
0406
Socket
031-9206-004
031-9206-021
Pin
030-1909-001
030-2045-000
Socket
031-1059-001
031-1059-002
Pin
030-1908-001
030-1908-001
Socket
031-1154-000
031-1154-000
Pin
030-2049-000
030-2049-000
Socket
031-1151-000
031-1151-000
1
Crimp
Tool
Part
Number
Wire
Accom.
Locator
Part
Number
Insertion/
Extraction
Tool
(Part No.)
Layout Usage
CIT-DPXMA-22
M81969/1-01
DPX
ME
DPX
MA
A106
A106
10,
A32W2,
40,
A40W1,
45,57
10,
25W2,
32W2
40,
40W1,
45,57
22,24,26
M22520/2-01
M22520/2-23
20,22,24
M22520/2-01
MS-3191-1
MS-3191-3
M22520/2-02
Std. Locator
Std. Locator
M22520/2-01
20,22,24
M22520/2-01
MS-3191-1
M22520/2-08
Standard
CIET-20
M81969/1-02
(980-0004-805)
10W3
A32W4,
67
10W3
32W4,
67
16,18,20
M22520/1-01
MS-3191-1
M22520/1-02
Std. Locator
CIET-16
(274-7002-000)
D8,
A10,
26,
A32W4,
67
D8,
A10,
B16W3,
26,
32W4,
67
12,14
M22520/1-01
M22520/1-11
CIET-12
(274-7003-000)
D8
8,
D8
8
CBT-600*
CBT600B*
CCH8-1 Head
CCHP-8-6
CET-8-2
(323-7004-000)
10
10
6
CBT-600*
CBT600B*
CCH4-1 Head
CCHP-4-8
CET-4-8
(323-7008-000)
A10
A10
CIET-20
(274-7001-000)
* Requires air line pressure of 80 to 100 psi.
These DPXME contacts are being superseded in favor of military DPXNE/NA contacts, this applies to all existing DPXME connector assemblies, except for size 20 contacts.
Electrical Data
Test Current
per MIL-C-39029
Table VI
Max. Current for
Tests (Amps)
(Mil-C-39029)
Max. Potential Drop
(Millivolts)
at 25 C
per MIL-C-39029
Contact
Size
Wire
Size
Insulation (0.D.)
Limits Inch (mm)
Max.
4
6
.310 (7.87)
60
60
33
8
8
.250 (6.35)
46
46
39
23
23
63
17
17
60
13
13
68
-
-
-
7.5
-
75
7.5
7.5
83
-
-
-
3
3.0
68
5
5.0
110
-
-
-
2
2.0
80
12
12
14
.135 (3.43)
16
16
18
.103 (2.62)
20
20
20
22
.071 (1.80)
24
22
22
24
.054 (1.37)
26
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
55
ARINC 404
DPX*MA/ME
Description of Modification Codes for Special Connector Insert Assemblies
Series
Class
DPX Insert Type
Class
Series
DPX Insert Type
None
DPXA
DPXB
Two (2) pieces, solder pot.
D*
-
(MA) LITTLE CAESAR assembly,
MA
DPXAMA
DPXBMA
LITTLE CAESAR rear release contact
E*
-
Metal plates.
retention assembly, crimp pot.
F*
-
Rear release, crimp (MB type only).
DPX2-
-
Standard 2 pieces, solder pot,
Class
Series
crimp pot, (Cat. A)
MAS
-
LITTLE CAESAR assembly, solder pot,
MB
-
LITTLE CAESAR rear release contact
both sides,
retention assembly, crimp pot, with
-
Standard LITTLE CAESAR asembly,
DPX2MAS
-
crimp pot both sides Ring-loc coax.
EX:DPX2MA-57S57S-33-0001
LITTLE CAESAR assembly, soler po,
both sides Ring-Loc coax.
EX: DPX2MAS-57S57S-33-001
DPX2MS-
-
DPX2MA
-
Ring-Loc, solder pot,
ME
-
Environmental, connector.
A*
-
Two (2) pieces, solder pot (Standard
2 pieces insert).
B*
-
Ring-Loc, solder pot. (See MS)
C*
-
(MAS) LITTLE CAESAR assembly,
DPX2AC(Reverse
CA)
-
DPX2AF
-
A side: Standard solder pot.
B side: Rear release crimp with separator.
Ex: DPX2AF-13S26S-33B-0001
DPX2BA
-
DPX2DA
-
DPX2EB
-
A side: Ring-Loc solder pot (40W1S).
B Side: 2 Piece, Solder Pot (57S).
Ex: DPX2BA-40W1S57S-33-0001
A side: (MA) LITTLE CAESAR
assembly, Crimp (67S).
B Side: 2 Piece, solder pot (57S).
Ex: DPX3DA-67S57S-33-0001
A side: Metal plates for grounding
(Coaxes).
B side: Ring-Loc, solder pot.
Ex: DPX2EB-C1P40W1P-34B-0001
Ex: DPX2-57S57S-33-0001
separator.
MS
Ring-Loc, solder pot. Layout 25C3
pin only and 40C1 Pin and socket.
EX: DPX2MS-40W1S40W1S-33-0001
Solder pot.
DPX Insert Type
A side: (MAS) LITTLE CAESAR
assembly, solder pot (32W2S)
B side; Standard 2 Piece, solder
pot (57S).
Ex: DPX2CA-32W2S57S-33-0001
DPX2CA-/
*NOTE: When any two of these letters are used in combination, the
inserts ("A" and "B") side have the style contacts indicated
(see table opposite for examples).
Contact and Termination Tooling Data
DPXMA (LIF) Crimp Contacts
Contact Size
and Part Numbers
Part Number
Size
Pin
Insertion/
Extraction Tooling
Crimp Tooling
Socket
Tool P/N
MIL
Spec
ITT
Cannon
Selec
tor#
Wire Size
Locator P/N
MIL
Spec
ITT
Cannon
MIL
Spec
ITT Cannon
Insertion
Extraction
Ins./Ext.
AWG
Insul
Dia. Max.
Strip
Length
(980-0004-804)
Metal Tip
26
24
22
.054
(1.37)
.130/.110
(3.30/2.54)
(980-0004-805)
Metal Tip
22
20
.071
(1.80)
.167/.147
(4.24/3.73)
222
030-2259-000
031-1287-000
M22520
/2-01
995-0001
-584
3
3
4
M22520
2-23
995-0002
-015
M81969
/1-01
CIT-DPXMA-22-1
Metal
(070256-0000)
CET-DPXMA-22
Metal
(070317-0000)
2020HD
030-2273-000
031-1302-000
M22520
/2-01
995-0001
-584
6
7
M22520
/2-08
995-0001
-604
M81969
/1-02
-
-
1616
030-2280-000
031-1303-000
M22520
1-01
995-0001
-585
4
5
6
M22520
/1-02
995-0001
-736
M81969
/1-03
-
CET-16-9
Plastic
(323-7001-000)
(980-0004-806)
Metal Tip
20
18
16
.103
(2.62)
.270/.230
(6.86/5.84)
1212
030-2286-000
031-1308-000
M22520
1-01
995-0001
-585
7
8
M22520
/1-11
995-0002
-027
M81969
/14-04
-
CET-12-4
Plastic
(323-7002-000)
CIET-12
Plastic
(274-7003-000)
14
12
.135
(3.43)
.270/.230
(6.86/5.84)
DPXMA Thermocouple Contacts
Contact Size
and Part Numbers
Part Number
Size
Pin
Insertion/
Extraction Tooling
Crimp Tooling
Socket
2222
Alumel
030-1975-009
031-1113-009
2222
Chromel
030-1975-010
031-1113-010
Tool P/N
Wire Size
Locator P/N
MIL
Spec
ITT
Cannon
Selec
tor#
MIL
Spec
ITT
Cannon
MIL
Spec
Insertion
Extraction
Ins./Ext.
AWG
Insul
Dia. Max.
Strip
Length
M22520
/2-01
995-0001
-584
3
3
4
M22520
/2-23
995-0002
-015
M81969
/1-01
CIT-DPXMA-22-1
Metal
(070256-0000)
CET-DPXMA-22
Metal
(070317-0000)
(980-0004-804)
Metal Tip
26
24
22
.054
(1.37)
.130/110
(3.30/2.54)
ITT Cannon
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
56
ARINC 404
DPX Solder
Coaxial/Power Contact Termination Data (Retained by Captive Insulator Assy.)
Contact
type
code
Pin
Socket
Cable
Accommodation
Layout
Accommodation
A
249-0672-000
249-0671-000
RG-187/U
RG-188/U
C7A, B16C3,
G25C3, C30C4,
A32C2, L40C1
.209 (5.31)
.106
(2.69) DIA.
B
249-0702-000
249-0703-000
RG-180/U
RG-195/U
C7B, J25C3,
C16C3, C32C2,
40C1
.209 (5.31)
.125 (3.18)
DIA.
C
249-0749-000
249-0750-000
RG-55/U
RG-58/U
RG-223/U
C7H, G16C3,
F25C3, D32C2,
F40C1
D
-
249-0518-000
RG-59/U
C7J, H16C3,
H25C3, F32C2,
E30C4, E40C1
I
249-0365-000
249-0353-000
RG-7/U
10C3
J
249-0257-000
249-0268-000
RG-55/U
RG-58/U
RG-223/U
A10C3
K
249-0583-000
024-0015-000
253-0120-000
249-0591-000
024-0015-000
253-0120-000
RG-187/U
RG-188/U
25C3, 32C2,
J16C3, A40C1,
C7, C7D
Rear Extension
from insulator
Part Number
.209 (5.31)
.067 (1.70) DIA.
.209 (5.31)
.149 (3.78) DIA.
.579
(14.71)
.250
(6.35) DIA.
.735
(18.67)
.616
(15.65)
.127
(3.23) DIA.
.085
(2.16) DIA.
A40C1 pin only, use C40C1 for socket.
.117 (2.97)
L
330-0144-000
330-0145-000
7.5 amp #20 wire
See Note 1
M
030-0056-010
031-0016-008
13 amp #16 wire
See Note 2
N
030-0017-015
-
23 amp
8
O
-
031-0059-008
#12 wire
8
.181 (4.60)
.237 (6.02)
4.58 (11.63)
* These coaxial contacts are supplied with the connector.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
57
ARINC 404
DPX Solder
Coaxial/Power Contact Termination Data (Retained by Captive Insulator Assy.)
Rear Extension
from insulator
Contact
type
code
Pin
Socket
Cable
Accommodation
Layout
Accommodation
R
249-1521-000
249-1522-000
RG-9/U, RG-214/U
C2
Z
249-1624-000
249-1598-000
RG-58/U
with Capitve
Contact
AA
249-1599-000
249-1622-000
RG-196/U
with Captive
Contact
C7X, ZF16C3,
R25C3, B30C4,
N32C2, K40C1
AB
249-1554-000
RG-58/U
C2C
AC
Consult Factory
RG-9/U
RG-214/U
C2M
Part Number
1.250 APP.
(31.75)
.440 (11.18) DIA
.206 (5.23) DIA.
.768
(19.51)
.364
(9.25)
C7AA, ZE16C3
Q25C3, A30C4
M32C2, J40C1
.140
(3.56) DIA.
.093 (2.36) DIA.
.040 (1.02) DIA.
.750 APPROX.
(19.05)
.224 (5.69) DIA.
249-1822-000
1.250 APPROX.
(31.75)
.438 (11.13) DIA.
249-5027-001
NOTES: 1. Code L-10C3, A10C3,17, 23, 25C3, E25C3, F25C3, G25C3. H25C3,J25C3, Q25C3, R125C3, 30C4, A30C4, C30C4, D30C4, E30C4, 32, 32C2, A32C2, C32C2, 032C2, F32C2, M32C2, N32C2,
Q32C2, 40, 40C1, B40C1, D40C1, E40C1, F40C1, H40C1, J40C1, K40C1, L40C1, 45, 57, 67,
2. Code M-B16C3, C16C3, G16C3, H16C3, M16C3, ZE16C3, ZF16C3, 26, 30C4, 32, 67
Suggested Cable Trim Dimensions
Inches
B
A
C
INNER CONDUCTOR
DIELECTRIC
BRAID
JACKET
Millimeters
Code Letter
A
B
C
A
B
C
A
.166/.146
.358/.318
.14
4.22/3.71
9.08/8.08
3.55
B
.166/.146
.358/.318
.14
4.22/3.71
9.08/8.08
3.55
C
.166/.146
.358/.318
.14
4.22/3.71
9.08/8.08
3.55
D
.166/.146
.358/.318
.14
4.22/3.71
9.08/8.08
3.55
E
.166/.146
.358/.318
.14
4.22/3.71
9.08/8.08
3.55
I
.166/.146
.39
.166/.146
4.22/3.71
9.91
4.21/3.71
J
.166/.146
.55
.166/.146
4.22/3.71
13.97
4.21/3.71
K
.198/.178
.488/.428
.25
5.03/4.52
11.38/10.87
6.35
Z
.08
.41
.23
2.03
10.41
5.84
AA
.11
.23
.195/.175
2.79
5.84
4.95/4.45
AB
.238/.198
.233/.193
.447/.427
6.04/5.03
5.92/4.90
11.35/10.89
AC
.345/.281
.516/.484
.359/.296
8.71/7.14
13.1/12.3
9.12/7.52
R
.238/.198
.233/.193
.582/.542
6.05/5.03
5.92/4.90
14.8/13.8
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
58
ARINC 404
DPX Solder
Coaxial Cable Assembly
ITT Cannon recommends resistance soldering for all
should be pre-tinned. Bushing, endbells, and junc-
factory for types not shown. The mechanical steps
solder contacts, particularly for RF cable where
tion shells (where applicabe) must be slipped over
in wiring coaxials described below.
excessive heat will damage the dielectric. Wires
wire bundles before soldering is started. Consult
For Codes A, B, C, D, and E
INNER CONTACT
INNER CONDUCTOR
COAXIAL SHELL
OUTER CONDUCTOR
JACKET
1. Cut cable evenly. Trim to dimensions as shown
on page 60. Care should be taken not to injure
the conductor or dielectric.
2. Remove inner contact from coaxial assembly
and solder it to inner conductor of cable.
3. Push inner contact back into coaxial assembly.
4. Pull outer conductor over coaxial shell, and
solder.
5. Apply shrink sleeving after assembly.
For Codes I and J
1. Cut cable evenly. Trim to dimensions as shown
2.
on page 60. Care should be taken not to injure
the conductor or dielectric.
2. Comb braid, tin conductor and remove flux.
3.
3. Remove solder pot cover. Insert cable and
solder conductor to contact. The dielectric
should butt against contact solder pot.
4. Replace solder pot cover and solder braid to
4.
ferrule.
5. Apply shrink sleeving after assembly.
For Codes K
CAP
1. Cut cable evenly. Trim to dimensions as shown
on page 60. Care should be taken not to injure
the conductor or dielectric.
CAP STRIP
OUTER
CONDUCTOR
2. Unscrew cap and remove spacer and inner
SPACER
INNER CONDUCTOR
INNER CONTACT
contact from coaxial assembly.
3. Push cable through center of cap and spacer.
4. Solder inner. contact to inner conductor of
cable.
5. Push inner contact back into coaxial shell assembly and attach cap.
6. Separate outer conductor of cables into two
pigtails 180˚ apart.
7. Attach on pigtail to each end of cap strip and
solder.
8. Apply shrink sleeving after assembly.
For Codes Z and AA
OUTER SLEEVE
CONTACT
REAR INSULATOR
SHELL
FRONT INSULATOR
ASSY
1. Cut cable evenly. Trim to dimensions as shown
on page 60. Care should be taken not to injure
the conductor or dielectric.
2. Solder inner conductor to coaxial contact
through side slot in coaxial with outer sleeve
pushed back on cable.
3. Pull sleeve forward over braid and solder
through holes in sleeve.
4. Solder sleeve to coaxial body.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
59
ARINC 404
DPX*MA Crimp
Coaxial Contacts
NOTES: 1. The "X" dimension is take from the rear of the shell.
2. Codes G and S are inactive for new design. Use codes AD and AE.
3. Code AA is designed for installations that have limited space in the terminal area. Use code AG for standard installations.
*P for pin; S for socket.
Codes A, B, C, D, E, H, P, R
Y DIA.
X
Z DIA.
Arr.
Used In
Code
Letter
A
B16W3
25W3
32W2
40W1
Cable
Accommodation
*RG-59/U
RG-62/U
P-249-1397-000
P-249-1399-000
*RG-58/U
C
*RG-180/U
RG-195/U
P-249-1401-000
D
RG-174/U, RG-187/U
RG-179/U, RG-188/U
P-249-1403-000
RG-178/U
RG-196/U
P-249-1405-000
W8
32W4
H
RG-174/U, RG-187/U
RG-179/U, RG-188/U
B16W3
25W3
32W2
40W1
P
*RG-58/U with nylon
braid over jacket
W8
32W4
R
*RG-178/U
RG-196/U
Ring Loc
S-249-1398-000
B
E
Contact
Retention
Part Number*
S-249-1400-000
S-249-1402-000
S-249-1404-000
.760 (19.30)
Ring Loc
.760 (19.30)
Ring Loc
.760 (19.30)
Ring Loc
.760 (19.30)
Ring Loc
S-249-1406-000
X
Max.
.760 (19.30)
LITTLE
CAESAR
.592 (15.04)
S-249-1608-000
Ring Loc
.760 (19.30)
P-249-1670-000
LITTLE
CAESAR
.592 (15.04)
P-249-1633-000
S-249-1634-000
S-249-1671-000
Y
Dia.
Z
Dia.
.158 (4.01)
.275 (6.53)
.148 (3.76)
.247 (6.27)
.128 (3.25)
.211 (5.36)
.118 (3.00)
.201 (5.10)
.128 (3.25)
.166 (4.22)
.118 (3.00)
.156 (3.96)
.072 (1.83)
.121 (3.07)
.062 (1.57)
.111 (2.82)
.072 (1.83)
.091 (2.31)
.062 (1.57)
.081 (2.06)
.072 (1.83)
.121 (3.07)
.062 (1.57)
.111 (2.82)
.128 (3.25)
.235 (5.97)
.118 (3.00)
.215 (5.46)
.072 (1.83)
.091 (2.31)
.062 (1.57)
.081 (2.06)
.158 (4.01)
.238 (6.04)
.148 (3.76)
.228 (5.79)
.130 (3.30)
.238 (6.04)
.120 (3.05)
.228 (5.79)
.158 (4.01)
.238 (6.04)
.148 (3.76)
.228 (5.79)
Crimp Tool
Extraction
Tool
CA58073
CET-C4
(038869-0004)
CCT-HX4-524
CCT-408M
CCT-HX4-524
CCT-408M
CET-C8
(323-7011-000)
Crimp
CA58073
CET-C4
(038869-0004)
CCT-HX4-524
CCT-408M
CET-C8
(323-7011-000)
CA58073
CCT-HX3-156
CET-C8
(323-7011-000)
CA58073
CCT-HX3-156
CET-C8
(323-7011-000)
CCT-HX4-524
CCT-408M
CET-C8
(323-7011-000)
Solder
CET-C4
(038869-0004)
*IMPORTANT: These coaxials can only be used in the DPX*MAS or DPX*MB Connector Series.
Codes F, S, T
X
Y DIA.
Z DIA.
W8
32W4
F
RG-59/U
RG-62/U
P-249-1474-000
S
RG-55/U
RG-142/U
P-249-1958-000
T
RG-59/U
RG-62/U
P-249-1960-000
Codes G
S-249-1471-000
S-249-1959-000
S-249-1961-000
LITTLE
CAESAR
.775 (19.68)
LITTLE
CAESAR
.592 (15.04)
LITTLE
CAESAR
.592 (15.04)
LITTLE
CAESAR
.500 (12.70)
X
Z DIA.
Y DIA.
W8
32W4
G
RG-58/U
Codes J
P-249-1631-000
S-249-1632-000
.130 (3.30)
.211 (5.36)
.120 (3.05)
.201 (5.10)
.130 (3.30)
.273 (6.93)
.120 (3.05)
.263 (6.68)
X
Z DIA.
Y DIA.
W16W3
25W3
32W2
40W1
J
RG-58/U
P-249-1388-000
S-249-1390-000
Ring Loc
798 (20.27)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
60
ARINC 404
DPX*MA Crimp
Coaxial Contacts
CODE K
X
Z DIA.
Y DIA.
Arr.
Used In
Code
Letter
B16W3
25W3
32W2
40W1
K
Cable
Accommodation
RG-178/U
RG-196/U
Part Number*
Contact
Retention
X
Max.
Ring Loc
.906 (23.01)
Ring Loc
.518 (13.16)
LITTLE
CAESAR
.425 (10.80)
P-249-1384-000
S-249-1413-000
Y
Dia.
Z
Dia.
.045 (1.14)
.098 (2.49)
.035 (0.89)
.088 (2.24)
.045 (1.14)
.098 (2.49)
.035 (0.89)
.088 (2.24)
Crimp Tool
Extraction
Tool
Solder
CET-C4
(038869-0004)
Solder
CET-C4
(038869-0004)
CCT-C10
CET-C8
(038869-0004)
Buchanan
612991
CET 4-8
(323-7008-000)
X
CODE L
.500 (12.70)
Y DIA.
Z DIA.
B16W3
25W3
32W2
40W1
L
RG-178/U
RG-196/U
CODE U
P-249-1386-000
S-249-1414-000
X
Y DIA.
Z DIA.
W8
U
RG-174/U, RG-187/U
RG-179/U, RG-188/U
S-249-1883-000
CODE V, AC
.069 (1.75)
.117 (2.97)
.059 (1.50)
.107 (2.72)
.260 (6.60)
.356 (9.04)
.254 (6.45)
.349 (8.86)
.205 (5.21)
.356 (9.04)
.199 (5.05)
.349 (8.86)
.088 (2.24)
.126 (3.20)
.084 (2.13)
.122 (3.10)
.114 (2.90)
.168 (4.27)
.104 (2.64)
.158 (4.01)
Y DIA.
X
Z DIA.
V
RG-115/U
P-249-1956-000
S-249-1957-000
LITTLE
CAESAR
S-249-1977-000
LITTLE
CAESAR
.800 (20.32)
LITTLE
CAESAR
.260 (6.60)
10W3
AC
RG-58/U
Z DIA.
CODE AA, AB, AD, AE, AF, AG
X
AA
AB
W8
32W4
AD
.800 (20.32)
RG-178/U
RG-196/U
P-249-1968-000
RG-180/U
RG-195/U
P-249-1982-000
RG-58/U
Y DIA.
T & B #WT400
S-249-1983-000
P-249-2017-000
S-249-2018-001
P-249-2019-001
AE
RG-142/U
AF
RG-174/U, RG-187/U
RG-179/U, RG-188/U
P-249-1633-004
AG
RG-178/U
RG-196/U
P-249-2061-000
LITTLE
CAESAR
S-249-2020-001
S-249-1634-003
S-249-2062-001
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
61
.575 (14.60)
Daniels
HX4-210
CET-C8
(323-7011-000)
ARINC 404
DPX*ME Crimp
DPX*MA/ME Coaxial Contact Data (for environmental requirements)
6
5
Components/Accessories
4
12
3
11
10
9
19
18
28
27
2
1
8
7
A2
A1
16
15
14
20
NOTE: The A32W2 & A40W1 (Ring Type Retention); AW8 & A32W4 (LITTLE CAESAR Renention) Coaxial Contact arrangements have been
redesigned to provide ease of insertion/removal of the coaxial contacts. Sealing is accomplished with the addiction of sealing sleeves
provided with the coaxial contact assembly.
24
30
Without Seal (MA)
Cable Accommodation
Sealed (ME)
Seal 1
X
Seal 2
RG59B, RG62A
22
21
25
26
32W2 (MA Version)
A32W2 (ME Version)
RING TYPE RETENTION (A32W2 & A40W1 CONTACT ARRANGEMENTS)
Part Number*
23
29
13
17
7
Ins. Dia.
Size/Max.
'A' Trim
Dim.
.249 (6.32)
.435 (11.05)
P-249-1397-001
P-249-1397-002
S-249-1398-003
S-249-1398-002
.415 (10.54)
P-249-1399-001
P-249-1399-002
.460 (11.68)
S-249-1400-003
S-249-1400-002
P-249-1401-001
P-249-1401-002
S-249-1402-003
S-249-1402-002
P-249-1403-001
P-249-1403-002
S-249-1404-003
S-249-1404-002
P-249-1405-001
P-249-1405-002
S-249-1406-003
S-249-1406-002
RG58B
X
.200 (5.08)
RG195
RG180B
.158 (4.01)]
RG179B
RG174, RG179B,
.113 (2.87)
Crimp
Tool
5
12
4
11
3
2
1
9
10
8
A1
19
18
CA58073
39
CA58073
22
29
30
16
17
23
24
31
.440 (11.18)
.460 (11.68)
6
13
28
38
15
21
27
37
14
20
26
36
25
35
34
33
32
40W1 (MA Version)
A40W1 (ME Version)
CA58073
.440 (11.18)
RG179B, RG196
X
.460 (11.68)
CCT-406M
.440 (11.18)
RG316
.083 (2.11)
.480 (12.19)
CCT-406M
.420 (10.67)
.400 (10.16)
Cable Trim
Dimensions
.330 (8.38)
.310 (7.86)
.460 (11.68)
A
*P for pin, S for socket
†Unsealed accomodates both Seal 1 & Seal 2 Cables.
††For use with connectors supplied less grommet ( Code 29**, etc.)
WITHOUT SEAL
Coaxial Contact Assembly Recommendations
(For Codes A, B, C, D, E, J, K, L and P)
(For Codes A, B, C, D, E, J, K, L and P)
1. Center contact, rear insulator, crimp ring, support bushing and seal sleeve are packaged separately and
shipped with the coaxial assembly.
2. Use impact extraction tool no. CET-C4 (038869-0004). An insertion tool is not required. (See Item 4).
3. Cable Assembly Instructions
Step 1- If applicable, determine which portion of seal sleeve should be used. If seal 2 is used, cut off
seal 1 portion
Step 2 - In sequence, place seal sleeve, support bushing and crimp ring over cable jacket.
Step 3 - Trim cable per illustration.
Step 4 - Place rear insulator over dielectric.
Step 5 - Solder innerconductor to center contact.
Step 6 - Insert soldered cable firmly into coaxial with shielding over coaxial shell.
Step 7 - Pull crimp ring forward until stopped and crimped.
Step 8 - Insert coaxial assembly into connector until engaged. Push support bushing into grommet
until shoulder rest on tublular extension. Then pull seal sleeve forward until it is snug
against grommet.
4. To extract coaxial, push back seal sleeve and support bushing. Then push out coaxial from engaging end
with CET-C4 (038869-0004) impact tool.
5. When crimping with CA58073 crimp tool, care should be taken to avoid flaring the front end of the
crimp ring. Place Crimp jaw so that the second tooth of the indentors is over the end of the crimp ring.
6. To facilitate extraction of contacts and avoid splaying the length of free cable adjacent to the rear
surface of the connector should not be less then 2.000 (50.80).
SOCKET
PIN
SEALED
SEAL 2
SEAL 1
SEAL
BUSHING
SOCKET
BUSHING
PIN
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
62
ARINC 404
DPX*ME Crimp
DPX*MA/ME Coaxial Contact Data (for environmental requirements)
Components/Accessories
7
1
9
16
22
24
2
8
10
15
3
23
25
28
6
32
Cable Trim Dimensions
1
4
31
30
5
8
29
7
W8** (MA Version)
AW8 (ME Version)
32W4** (MA Version)
A32W4 (ME Version)
.610 (15.49)
.590 (14.99)
A
LITTLE CAESAR® CONTACT RETENTION (A32W4 & AW8 CONTACT ARRANGEMENTS)
Cable Accommodation†
Part Number*
Without Seal†† (MA)
Sealed (ME)
Seal 1
P-249-1633-004
P-249-1633-003
S-249-1634-003
S-249-1634-002
P-249-1982-000
P-249-1982-001
S-249-1983-000
S-249-1983-001
P-249-2017-001
P-249-2017-000
S-249-2018-001
S-249-2018-000
P-249-2019-001
P-249-2019-000
S-249-2020-001
S-249-2020-000
P-249-2061-001
P-249-2061-000
S-249-2062-001
S-249-2062-000
RG179
{
{
{
{
Ins. Dia.
Size/Max.
Seal 2
RG174, RG316,
.111 (2.82)
'A' Trim
Dim.
.350 (8.89)
.330 (8.38)
RG179B
RG180B
RG195
.158 (8.89)
RG58C
X
.196(4.98)
.260 (6.60)
.250 (6.35)
SOCKET
.260 (6.60)
.250 (6.35)
RG142B
X
.196 (4.98)
RG178B
X
.075 (1.90)
.260 (6.60)
.250 (6.35)
PIN
.260 (6.60)
.250 (6.35)
*P for Pin. S for Socket
Unsealed accommodates both Seal 1 & Seal 2 cables.
For use with connector supplied less grommet (Code-29**, etc.).
WITHOUT SEAL
Coaxial Contact Assembly and Extraction Recommendations
1. Use Crimp Tool No. DIE Y211 (995-0002-249), Tool M22520 / 5-01 (9950001-761).
2. Use extraction tool No. CET-C8. An insertion tool is not required.
(See Note 5).
3. Center contact, rear insulator, crimp ring, support bushing (not applicable to
RG58/RG142 coaxials), seal sleeve, front insulator, shell and ferrule are
shipped unassembled in a common container.
4. Cable Assembly Instructions:
Step 1 - If applicable, determine which portion of seal sleeve should be
used. If seal 2 is used, cut off seal 1 portion.
Step 2 - In sequence, place seal sleeve, support bushing and crimp ring
over cable jacket.
Step 3 - Trim cable per illustration.
Step 4 - Comb out braid and flare out ends to permit entry of ferrule.
Step 5 - Complete termination per illustration. (See below)
5. To extract: coaxial, push back seal sleeve and support bushing. Slip cable into extraction tool. Push tool into insert until it contacts coaxial retaining shoulder. Grip
both cable and tool with one hand and pull coaxial rearward out of insert cavity.
SEALED
SEAL 2
BUSHING
SEAL 1
SOCKET
SEAL
SOCKET
BUSHING
PIN
PIN
6. To facilitate extraction of contacts and avoid splaying, the length of free cable
adjacent to the rear surface of the connector should not be less than 2.000
(50.80).
.035 (0.89)
.030 (0.76)
FERRULE
A. Carefully push inner conductor through rear insulator.
B. While holding rear insulator firmly against ferrule, trim conductor to .156
(3.96)/.146 (3.71) dimension.
C. Place contact over conductor and solder.
FRONT INSULATOR
BRAID
.350
(8.89)
APPROX.
CRIMP AREA
COAXIAL SHELL
A. Place front insulator over contact and then push assembly into coaxial shell.
B. Place parts in jaw of crimp tool. Locate jaws at start of chamfer on crimp
sleeve. Press sleeve firmly into coaxial shell and crimp.
C. After assembled coaxial is inserted into connector, push support bushing into
grommet until shoulder rests on tubular extension. Then pull sealing sleeve
forward until it is snug on grommet.
.156 (3.96)
.146 (3.71)
CONTACT
REAR INSULATOR
A. Push ferrule under braid as far as it will go. Trim off braid extending beyond
shoulder of ferrule, if necessary.
B. While holding ferrule in place pull crimp sleeve forward over braid until it is
tight against shoulder an ferrule. Pull firmly against face of ferrule to make
sure it is up tight.
C. Trim dielectric to the .035 (0.89)/.030 (0.76) dimension.
www.ittcannon.com
63
ARINC 404
DPX*MA Crimp
Coaxial Cable Assembly Recommendations
LITTLE CAESAR Contact Assembly Data
For Codes F, S and T
1. Strip and trim cable as shown on page 60.
2. Solder inner conductor to coaxial contact with crimp ring over braid and rear insulator over inner
conductor.
3. Insert cable into coaxial with shell under braid. Crimp ring with Cannon crimp tool CA58073.
For Codes G, H and R
1. Strip and trim cable as shown on page 60.
2. Solder inner connector to coaxial contact with crimp ring pushed back on cable.
3. Insert cable into coaxial and pull ring forward over braid. Crimp ring with Cannon crimp tool
CA58073-0001 or CCT-408M. After crimping, crimp ring must not exceed .252 (6.40) diameter.
For Codes U
1. Strip and trim cable as shown on page 60.
2. Slide crimp ring over braid and jacket of cable.
3. Unbraid exposed portion of braid and fold braid wires backward over outside of crimp ring.
4. Insert prepared wire into right angle fitting of shell assembly. Conductor should be aligned in slot of the
center contact. Crimp with Cannon tool CCT/C10.
5. Solder center conductor of cable to contact. Insert cap and solder in place.
For Codes AA
.250 (6.35)
.230 (5.84)
JACKET
FERRULE
1 . Slip ferrule over cable jacket. Trim outer jacket. Comb out braid as shown. Retrim braid.
2. Bend up combed out braid at right angles to cable. Slide ferrule up to bend and fold braid back against
DIELECTRIC
ferrule.
3. Slide rear insulator over dielectric as shown. Press insulator firmly against folded back braid and trim
.034 DIA.
(0.86)
REAR INSULATOR
dielectric flush with insulator. Then cut inner conductor to length shown.
.156 (3.96)
.136 (3.45)
4. Place contact over conductor. Press contact and insulator firmly against braid and solder contact to
conductor.
CONTACT
5. Push cable assembly into shell, pressing against rear of ferrule and crimp area shown with T. & B.
#WT-400 Crimp Tool while making sure parts do not move out of place.
SHELL
CRIMP AREA
For Codes AC
1 . Trim jacket to .680 (17.27)/.660 (16.76) dimension. Then slide ferrule over braid until it stops
.198 (5.03)
.680 (17.27)
.660 (16.76)
FERRULE
JACKET
against jacket, and comb out exposed portion of braid.
REAR INSULATOR
2. Fold combed braid over ferrule as shown. Then trim dielectric to .070 (1.78)/.060 (1.52) dimension
and slide rear insulator over dielectric until it presses against braid.
.070 (1.78)
.060 (1.52)
3. Press insulator against braid and trim inner conductor to .247 (6.27)/.237 (6.02) dimension. Then place
contact over conductor and crimp with MS3191-3 (do not use MS3191-1). Press parts firmly
against locator during crimping operation.
.247 (6.27)
.237 (6.02)
4. Place front insulator over contact. Push parts into coaxia! shell. While holding parts firmly against stop
shoulder in coaxial shell, place jaw of crimp tool at back end of shell and crimp. Use Buchanan crimp
COAXIAL SHELL
CONTACT
FRONT
INSULATOR
tool #612991 (.343 [8.71) across hex].
.400 APPROX.
(10-16)
.070 (1.78) MAX.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
64
ARINC 404
DPX*MA Crimp
Coaxial Cable Assembly Recommendations (Continued)
For Code V
FERRULE
1. Trim cable to dimensions shown below.
SOLDER ALL AROUND
A. Push ferrule under braid as far as it will go and press braid down tightly around ferrule.
B. Solder ends of braid to ferrule by applying a small amount of solder. Avoid excess solder as it would
cause braid to swell up.
0.75 MAX.
(1.90)
C. Remove any solder exceeding the .349 (8.86) max. diameter.
.349 DIA. MAX
(8.86)
D. Check the .075 (1.90) max. dielectric extension, retrim if necessary.
FRONT INSULATOR
3. A. Place rear insulator over dielectric and conductor into contact.
B. Solder contact to conductor through access hole.
C. Remove excess solder from outside of contact.
4. A. Place front insulator over contact.
.400 APPROX.
(10.16)
B. Push parts into coaxial shell.
C. While holding parts firmly against stop shoulder in coaxial shell, place jaw of crimp tool at back end
of shell and crimp, use Buchanan crimp tool #612991 [.343 (8.71) across hex].
For Codes AB, AD, AE, AF and AG
.610 (15.49)
.590 (14.99)
Setp 1 - Trim cable as shown.
Step 2 - Flare out ends of braid to permit entry of ferrule.
.260 (6.60)
.250 (6.35)
Step 3 - Complete termination per instructions as shown below.
a. Push ferrule under braid as far as it will go. Trim off braid extending beyond shoulder of ferrul, if
necessary.
Crimp Sleeve
b. While holding ferrule in place pull crimp sleeve forward over braid until it is tight against shoulder on
.035 (0.89)
.030 (0.76)
ferrule. Push firmly against face of ferrule to make sure it is up tight.
c. Trim dielectric to the .035 (0.89)/ .030 (0.76) dimension.
d. Carefully push inner conductor through rear insulator.
FERRULE
e. While holding rear insulator firmly against ferrule, trim conductor to .156 (3.96)/.146 (3.71)
dimension.
f.
.156 (3.96)
.146 (3.71)
Place contact over conductor and solder.
g. Place front insulator over contact and then push assembly into coaxial shell.
CONTACT
h. Place parts in jaw of crimp tool. Locate jaws at start of chamfer on crimp sleeve. Press
REAR INSULATOR
Sleeve firmly into coaxial shell and crimp. Use Daniels crimp tool HX4-210.
.350 APPROX
(8.89)
CRIMP AREA
FRONT INSULATOR
COAXIAL SHELL
Cable Trim Dimensions
Inches
Code
Letter
Millimeters
A
B
C
A
B
A
.420/.400
.432/.415
.330/.310
.10.67/10.16
11.05/10.54
8.38/7.87
B, C, D & P
.420/.400
.460/.440
.330/.310
10.67/10.16
11.68/11.18
8.38/7.87
E
.420/.400
.480/.460
.330/.310
10.67/10.16
12.19/11.68
8.38/7.87
F
.785/.745
.275/.255
.228/.208
19.94/18.92
6.98/6.48
5.79/5.28
G
.490/.470
.275/.255
.156/.136
12.45/11.94
6.98/6.48
3.96/3.45
H&R
.581/.561
.345/.325
.156/.136
14.76/14.25
8.76/8.26
3.96/3.45
J
.326/.306
.250/.230
.088/.068
8.28/7.77
6.35/5.84
2.24/1.73
K
.410/.390
.290/.270
.088/.068
10.41/9.91
7.37/6.86
2.24/1.73
L
.385/.365
.244/.224
.074/.064
9.78/9.27
6.20/5.69
1.88/1.63
S
.678/.658
.275/.255
.156/.136
17.22/16.71
6.98/6.48
3.96/3.45
U
.940/.920
.760/.740
.080/.060
23.88/23.37
19.30/18.80
2.03/1.52
V
.550/.540
.415/.405
.250/.240
13.97/13.72
10.54/10.29
6.35/6.10
T
.598/.578
.300/.280
.228/.208
15.19/14.68
7.62/7.11
5.79/5.28
AA, AC
See page 60 for dimensions
AB, AD, AE, AF, AG
See page 60 for dimensions
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
65
A
C
B
C
INNER CONDUCTOR
DIELECTRIC
BRAID
JACKET
ARINC 404
DPX
Modifications Codes
DPXA Modifications Codes
- 4. Mounting holes .120 (3.05) dia. c'sink 100˚ to .225 (5.72) dia.
- 5. 4-40 clinch nuts.
- 6. Removable insert retainer plate.
- 7. Mounting holes .120 (3.05) dia. c'sink 82 to .230 (5.84) dia.
-12. Mounting holes .132 (3.35)/.125 (3.18).
-16. A106 insert with separator.
-17. With grommet and mounting holes .120 (3.05) dia. countersunk 100˚ to .225 (5.72) dia.
-70. Standard mounting with (LIF) contacts.
-77. Same as -7 except with low insertion force (LIF) contacts (for LIF contact data).
DPXB and DPX2/3/4 Modification Codes
Some of the modification numbers used in the DPX
only certain types. The following chart gives the
type in which they may be used (-33 is for plug
lines apply to all types and some are applicable for
modification number, the description, and the shell
shells, -34 is for receptacle shells).
Modification
Applicable Series
- 00**
DPX2-33 and 34
DPX2-33A
DPX2-33F and 34F
DPX2-33M and 34M
Standard construction, mounting holes .120 (3.05) dia.
and with tabs for junction shells.
- 00
DPX2-34A
Standard construction - six floating eyelets
and tabs for junction shells,
- 00
DPX2-33B
DPXB-33
DPX3-33
DPX4-33
Standard construction, mounting holes .120 (3.05) dia.
countersunk 82˚ to .230 (5.84) dia. - no tabs.
DESCRIBES STANDARD
CONNECTOR HOUSING
- 00
MODIFICATION 00
- 01
#4-40 CLINCH NUTS
DPX2-34B
DPXB-34
DPX3-34
DPX4-34
DPX2-34B/33B
DPXB-34
- 01
DPX3-34
DPX4-34
- 01
- 02
- 02
- 02
MODIFICATION 02
ATTACHING TABS
ALTERNATE STYLE
MOUNTING HOLES
.120 (3.05) DIA.
C'SUNK 100 TO
.230 (5.84) DIA.
- 03
1
1
DPX2-33 and 34
DPX2-33A
DPX2-34A
DPX2-33F and 34F
DPX2-33M-34M
- 01
MODIFICATION 01
#4-40 THREAD
(2 TABS PER
RETAINING
PLATE)
Definition
Standard construction, mounting holes 120 (3.05) dia. - no tabs.
Standard construction and with standard junction shells.
With four #4-40 clinch nuts in mounting holes.
1
With six #4-40 clinch nuts in mounting holes.
1
With ten #440 clinch nuts in mounting holes.
DPX2-33 and 34
DPX2-33A
DPX2-34A
DPX2-33F and 34F
DPX2-33M and 34M
Standard construction and with 90˚ junction shells.
DPX2-33B and 34B
DPXB-33 and 34
DPX3-33 and 34
DPX4-33 and 34
Standard construction and with tabs for attaching junction shells.
DPXBME-33 and 34
DPX2ME-33 and 34
DPX3ME-33 and 34
DPX4ME-33 and 34
DPX2-33 and 34
DPX2-33A
DPX2-33F and 34F
DPX2-33M and 34M
DPXB-33 and 34
DPX3-33 and 34
DPX4-33 and 34
1
Standard construction and with tabs for attaching junction shells.
2
Mounting holes .120 (3.05) dia. countersunk 100˚ to .230(5.84) dia.
1
MODIFICATION 03
1
1
Applicable for all MA, ME, NA & NE Series Connectors.
Applicable to NE Series also.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
66
ARINC 404
DPX
Modifications Codes
Modfication
MOUNTING HOLES
.120 (3.05) DIA.
C'SUNK 100 TO
.230 (5.84) DIA.
- 04**
Applicable Series
DPX2-33B
DPXB-33
DPX3-33
DPX4-33
Definition
.120 (3.05) dia. mounting notes countersunk 100˚ to .230 (5.84) dia.
and tabs for attaching junction shells.
1
#4-40 THREAD
ATTACHING TABS
(2 PER RETAINING
PLATE)
MODIFICATION 04
MOUNTING HOLES
.137 (3.48) DIA.
C'SUNK 82 TO
.230 (5.84) DIA.
ALTERNATE STYLE
- 08
DPX2-33 and 34
DPX2-33F and 34F
Mounting holes .137 (3.48) dia. countersunk 82˚ to .230 (5.84) dia.
- 12
DPX2-34B
DPXB-34
With mounting slots .208 (5.28) wide.
- 13
DPX2-34B
DPXB-34
With mounting slots .237 (6.02) wide.
- 14
DPX2-33B
DPXB-33
DPX2-34B
DPXB-34
DPX3-33
DPX3-34
With straight junction shelf. (Not available on DPX4)
MODIFICATION 08
MOUNTING
SLOTS (4)
.208 (5.28)
MODIFICATION 12
MOUNTING
SLOTS (4)
.237 (6.02)
MODIFICATION 13
(SEE PAGE 62 FOR JUNCTION
SHELL CONFIGURATIONS
#4-40 CLINCH NUTS
- 17
DPX2-33B
DPXB-33
DPX2-34B
DPXB-34
#4-40 THREAD
1
DPX3-34
- 17
ATTACHING TABS
(2 PER RETAINING
PLATE)
1
- 17
DPX4-34
With four #4-40 clinch nuts in mounting holes
and tabs for attaching junction shells.
1
With six #4-40 clinch nuts in mounting holes
and tabs far attaching junction shells.
1
With ten #4-40 clinch nuts in mounting holes
and tabs for attaching junction shells,
MODIFICATION 17 ALTERNATE STYLE
#4-40 CLINCH NUTS
DPX2-33B
DPXB-33
DPX2-34B
DPXB-34
DPX3-34
- 18
#4-40 THREAD
ATTACHING TABS
(2 PER RETAINING
PLATE)
MODIFICATION 18
ALTERNATE STYLE
1 Applicable for all MA, ME, NA & NE Series Connectors.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
67
With six #4-40 clinch nuts in mounting holes
and tabs for attaching junction shells.
1
ARINC 404
DPX
Modifications Codes
Modfication
#4-40 CLINCH NUTS
Applicable Series
- 19**
Definition
DPX2-33B
DPXB-33
DPX2-34B
DPXB-34
DPX3-33
DPX3-34 (Same as Code -01)
With six #4-40 clinch nuts in mounting holes.
Do not assign - use -01 code
MODIFICATION 19
- 20
DPX2-33A
DPX2-34A
- 22
DPX2-33 and 34
DPX2-33A
DPX2-33B
DPXB-33
DPX2-33M and 34M
DPX3-33
DPXBME, DPX2ME, DPX3ME,
DPX4ME - 33 only
DPX2-33F and 34F
MODIFICATION 20
With eight #4-40 clinch nuts in mounting holes.
SUPERSEDED BY
01 MOD.
MODIFICATION 22
- 23
.022 (0.56) MAX.
.014 (0.36) MAX.
4 PLACES
.255 (6.48)
DIA. MAX.
.037
(0.94)
MAX.
.019
(0.48)
MIN
.025 (0.64) MAX.
.037
(0.94)
MAX.
.037 MAX.
(0.94)
.255 (6.48)
DIA. MAX.
.015
(0.38)
MIN
4 PLACES
RIVET
4 REQD.
FRONT FACE OF
FLANGE
Standard construction without tabs on insert retaining plate.
DPX2-33 and 34
DPX2-33A
DPX2-33B
DPXB-33
DPX2-34B
DPXB-34
DPX3-33 and 34
DPX4-33 and 34
DPX2-33F and 34F
Same as 01. 01 Recommended
With floating eyelets.
1
- 34 RECEPT.
- 33 PLUG
MODIFICATION 23
MOUNTING
HOLES(4), . 156(3.96)
DIA.
- 24
DPX2-34A
DPX2-33B
With six mounting holes .208 (5.28) dia. (Foating eyelets omitted)
- 25
DPX2-34B
DPXB-34
With four mounting holes .157 (3.99)/.155 (3.94) dia. (Clinch nuts omitted)
1
MODIFICATION 25
DPX2-34B
DPXB-34
DPX3-34
- 26
Mounting holes .120 (3.05) dia. countersunk 82* to .230 (5.84) dia.
and has tabs for attaching junction shells.
1
MOUNTING
HOLES(4), . 120 (3.05)
DIA., C'SUNK 82 TO
.230 (5.84) DIA.
MODIFICATION 26
- 29
DPX2-34A
With interfacial seal (if pins) without junction shell tabs and military gold
plating on the contact.
- 29
DPXBME-34P & 33S
DPX2ME-34P & 33S
DPX3ME-34P & 33S
DPX4ME-34P & 33S
Standard except less grommet*
2
DPXBME-34P
DPX2ME-34P
DPX3ME-34P
DPX4ME-34P
- 31
2
Standard except less grommet and with clinch
nuts in mounting holes.
2
DPXBME-34P
DPX2ME-34P
DPX3ME-34P
DPX4ME-34P
- 37
Standard except less grommet and with tabs for
attaching junction shells.
(-34 pin only)
Standard except less grommet and with floating
bushings. (Slatted shells).
DPXBME-34P
DPX2ME-34P
DPX3ME-34P
DPX4ME-34P
- 33
Applicable for all MA, ME, NA and NE Series Connectors.
* On the A106S layout the grommet is replaced by the separator.
DPXBME-34P
DPX2ME-34P
DPX3ME-34P
DPX4ME-34P
- 30
1
1
Standard less grommet and with clinch nuts in mounting holes
and with tabs for attaching junction shells.
2
**Indicates polarizing position. (See page 72)
2
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
68
ARINC 404
DPX
Modifications Codes
Modfication
Applicable Series
- 39**
FLOATING BUSHINGS
DPXB-33 & 34
DPX2-33B
DPX2-34B
DPX3-33 & 34
DPX4-33 & 34
Definition
With floating eylets & tabs for attaching junction shells.
1
#4-40 THREAD
ATTACHING TABS
(2 PER RETAINING
PLATE)
MODIFICATION 39
ALTERNATE STYLE
The -7*** and 8*** Modification Codes are reserved for connectors which have Low Insertion Force (LIF) Contacts.
The LIF design is not applicable to thermocouple contacts, coaxial contacts and contacts larger than size 8 and Standard size 20
- 70**
All DPX series with
LITTLE CAESAR retention
Same as -00 with addition of LIF contacts
See Contact Section Page 54
- 71
All DPX series with
LITTLE CAESAR retention
Same as -31 with addition of LIF contacts
See Contact Section Page 54
- 72
All DPX series with
LITTLE CAESAR retention
Same as -01 with addition of LIF contacts
See Contact Section Page 54
- 73
All DPX series with
LITTLE CAESAR retention
Same as -23 with addition of LIF contacts
See Contact Section Page 54
- 74
All DPX series with
LITTLE CAESAR retention
Same as -33 with addition of LIF contacts
See Contact Section Page 54
- 75
All DPX series with
LITTLE CAESAR retention
Same as -02 with addition of LIF contacts
See Contact Section Page 54
- 76
All DPX as listed for code -22
Same as -22 with addition of LIF contacts
All DPXB series
Mounting holes .120 (3.05) dia. countersunk 82 to
.230 (5.84) dia. and has LIF contacts.
All DPX series with
LITTLE CAESAR retention
Same as -29 with addition of LIF contacts
- 77
- 78
- 79
1
Applicable for all MA, ME, NA and NE Series Connectors.
2
**Indicates polarizing position. (See page 72)
Applicable for NE Series Also.
Polarization
Two Post Type
Face View of Engaging End
DPX2-33F
or 33M
DPX2-34F
or 34M
B
B
LEFT POST
TOP
TOP
COUPLING
MECHANISM
A
A
RIGHT POST
LEFT POST
COUPLING
MECHANISM
RIGHT POST
Three Post Type
DPXB-33
DPXB-34
LEFT POST
DPX2-33A or 33B
LEFT POST
CENTER POST
TOP
CENTER POST
LEFT POST
CENTER POST
RIGHT POST
A
RIGHT POST
B
RIGHT POST
DPX2-34A or 34B
DPX3-33
DPX4-33
LEFT POST
CENTER POST
A
TOP
TOP
TOP
LEFT POST
OR KEY
CENTER POST
OR KEY
LEFT POST
CENTER POST
RIGHT POST
OR KEY
B
RIGHT POST
RIGHT POST
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
69
ARINC 404
DPX
Polarization
Positions
1
2
3
4
5
6
Dark areas represent post
Two Post Type
33 PLUG MALE SHELL
Position
34 RECEPTACLE FEMALE SHELL
Left Post
Right Post
Position
Left Post
Right Post
Position
Left Post
Right Post
Position
Left Post
Right Post
01
02
03
04
05
4
5
6
2
3
4
4
4
4
4
09
10
11
12
13
3
4
2
3
2
3
2
2
2
1
01
02
03
04
05
1
1
1
1
1
1
6
5
3
2
09
10
11
12
13
2
3
3
3
4
2
1
3
2
3
06
07
08
4
5
2
3
3
3
14
15
3
2
1
6
06
07
08
2
2
2
1
6
3
14
15
4
5
2
3
Three Post Type
PLUG SHELL
RECEPTACLE SHELL
Left
Post
Center
Post
01
02
03
04
05
1
2
3
4
5
1
1
1
1
1
1
1
1
1
1
51
52
53
54
55
3
4
5
6
1
2
2
2
2
2
5
5
5
5
4
01
02
03
04
05
4
4
4
4
4
4
4
4
4
4
4
3
2
1
6
06
07
08
09
10
6
1
2
3
4
1
1
1
1
1
1
6
6
6
6
56
57
58
59
60
2
3
4
5
6
2
2
2
2
2
4
4
4
4
4
06
07
08
09
10
4
5
5
5
5
4
4
4
4
4
11
12
13
14
15
5
6
1
2
3
1
1
1
1
1
6
6
5
5
5
61
62
63
64
65
1
2
3
4
5
2
2
2
2
2
3
3
3
3
3
11
12
13
14
15
5
5
6
6
6
16
17
18
19
20
4
5
6
1
2
1
1
1
1
1
5
5
5
4
4
66
67
68
69
70
6
1
2
3
4
2
2
2
2
2
3
2
2
2
2
16
17
18
19
20
21
22
23
24
25
3
4
5
6
1
1
1
1
1
1
4
4
4
4
3
71
72
73
74
75
5
6
1
2
3
2
2
3
3
3
2
2
1
1
1
26
27
28
29
30
2
3
4
5
6
1
1
1
1
1
3
3
3
3
3
76
77
78
79
80
4
5
6
1
2
3
3
3
3
3
31
32
33
34
35
1
2
3
4
5
1
1
1
1
1
2
2
2
2
2
81
82
83
84
85
3
4
5
6
1
36
37
38
39
40
6
1
2
3
4
1
2
2
2
2
2
1
1
1
1
86
87
88
89
90
41
42
43
44
45
5
6
1
2
3
2
2
2
2
2
1
1
6
6
6
46
47
48
49
50
4
5
6
1
2
2
2
2
2
2
6
6
6
5
5
Position
Right
Post
Left
Post
Center
Post
Right
Post
Left
Post
Center
Post
Right
Post
Left
Post
Center
Post
Right
Post
51
52
53
54
55
6
6
6
6
1
3
3
3
3
3
2
1
6
5
4
5
4
3
2
1
56
57
58
59
60
1
1
1
1
1
3
3
3
3
3
3
2
1
6
5
4
4
4
4
4
6
5
4
3
2
61
62
63
64
65
2
2
2
2
2
3
3
3
3
3
4
3
2
1
6
6
6
6
1
1
4
4
4
4
4
1
6
5
4
3
66
67
68
69
70
2
3
3
3
3
3
3
3
3
3
5
4
3
2
1
21
22
23
24
25
1
1
1
1
2
4
4
4
4
4
2
1
6
5
4
71
72
73
74
75
3
3
4
4
4
3
3
2
2
2
6
5
4
3
2
1
1
1
6
6
26
27
28
29
30
2
2
2
2
2
4
4
4
4
4
3
2
1
6
5
76
77
78
79
80
4
4
4
5
5
2
2
2
2
2
1
6
5
4
3
3
3
3
3
3
6
6
6
6
5
31
32
33
34
35
3
3
3
3
3
4
4
4
4
4
4
3
2
1
6
81
82
83
84
85
5
5
5
5
6
2
2
2
2
2
2
1
6
5
4
2
3
4
5
6
3
3
3
3
3
5
5
5
5
5
36
37
38
39
40
3
4
4
4
4
4
3
3
3
3
5
4
3
2
1
86
87
88
89
90
6
6
6
6
6
2
2
2
2
2
3
2
1
6
5
91
92
93
94
95
1
2
3
4
5
3
3
3
3
3
4
4
4
4
4
41
42
43
44
45
4
4
5
5
5
3
3
3
3
3
6
5
4
3
2
91
92
93
94
95
1
1
1
1
1
2
2
2
2
2
4
3
2
1
6
96
97
98
99
6
1
2
3
3
3
3
3
4
3
3
3
46
47
48
49
50
5
5
5
6
6
3
3
3
3
3
1
6
5
4
3
96
97
98
99
1
2
2
2
2
2
2
2
5
4
3
2
Position
Position
Position
The last two digits in the DPX nomenclature (ex: DPXB-8-33B-0014) refer to the polarizing post position. When the last two digits are omitted it means the
polarizing posts will not be assembled and position number is not stamped on the connector. This allows the customer to position the posts themselves and then
stamp the appropriate number on the shell. If the last two digits are made 00 it means the polarizing posts are deleted.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
70
ARINC 404
DPX
Panel Cutouts
DPXA
1.781 (45.24)
.125 (3.15)
RAD. TYP.
.750
(19.05)
.120 (3.05) DIA.
4 HOLES
1.140
(28.96)
NOTE - WHEN USING THE -2301 FLOATING EYELET
MODIFICATION, ADD .050 (1.27) TO THE CUTOUT
SIZE TO ALLOW FOR FLOAT (EXCEPTION -34A)
2.062 (52.38)
DPXB
1.437
(36.50)
CL OF
INSERT
.718
(18.24)
1.720
(43.70)
CL
1.720
(43.70)
.120 (3.05) DIA.
4 HOLES
CL
.720
(18.29)
1.350
(34.30)
.720
(18.29)
1.720
(43.69)
1.437
(36.50)
.561
(14.25)
.125 R. TYP.
(3.18)
- 33 Rear Mount
- 34 Rear Mount
- 34 Front Mount
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
71
CL OF INSERT
.580
(14.73)
1.25
(3.18)
1.78 (4.52)
- 33 Front Mount
.718
(18.24)
1.440
(3.66)
.260 (6.60)
.120 (3.05) DIA.
4 HOLES
ARINC 404
DPX
Panel Cutouts
All tolerances are +
_ .015 (0.38) unless otherwise noted.
DPX2
2.062 (52.38)
.120 (3.05) DIA.
8 HOLES
1.031
(26.16)
.750 TYP.
(19.05)
.156 R. TYP.
(3.96)
2.062 (52.38)
CL
1.031
(26.16)
.120 (3.05) DIA.
8 HOLES
2.800
(71.10)
.750 TYP.
(19.05)
2.700
(68.60)
2.230
(56.60)
CL
.469 TYP.
(11.91)
1.160
(29.50)
1.630
(41.40)
.125 R. TYP.
(3.18)
1.720 (43.70)
2.840
(72.10)
CL
.469 TYP.
(11.91)
.469 TYP.
(11.91)
- 33 FRONT MOUNT
1.780
(45.20)
- 33 REAR MOUNT
- 34 FRONT
OR REAR MOUNT
1
.125 R. TYP.
(3.18)
2.783
(70.69)
1.720 (43.70)
1.890
(48.00)
CL
CL
.120 (3.05) DIA. 6 HOLES
OMIT CENTER
HOLES FOR - 33B
1.437
(36.50)
- 33A & -33B FRONT MOUNT
1.437
(36.50)
2.500
(63.50)
CL
2.783
(70.69)
2.350
(59.69)
2.783
(70.69)
CL
.120 (3.05) DIA.
4 HOLES
CL
1.391
(35.33)
1.391
(35.33)
2.460
(62.50)
CL
.718
(18.24)
.120 (3.05)
6 HOLES
1.160
(29.46)
.718
(18.24)
1
1.437
(36.50)
1.630
(41.40)
1.391
(35.33)
.120 (3.05) DIA
8 HOLES
CL
.750 TYP
(19.05)
CL
2.062 (52.38)
1.031
(26.19)
.718
(18.24)
.156 R. TYP.
(3.96)
1.780
(45.21)
- 33A REAR MOUNG
- 34B FRONT MOUNT
For - 23 float mtg. mod. 1.78 (45.21).
1.437
(36.50)
.120 (3.05) DIA.
6 HOLES
1.437
(36.50)
.718
(18.24)
.718
(18.24)
CL
1.391
(35.33)
2.783
(70.69)
.120 (3.05) DIA.
4 HOLES
CL
1.391
(35.33)
2.550
(64.77)
CL
2.500
(63.50)
CL
1.970
(50.04)
2.783
(70.69)
1.830
(46.48)
1.260
(32.00)
.156 R. TYP.
(3.96)
1.780
(45.21)
- 34A REAR MOUNT
(-34A FRONT MOUNT CONSULT FACTORY)
- 33B REAR MOUNT
- 33B REAR MOUNT
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
72
ARINC 404
DPX
Panel Cutouts
All tolerances are +
_ .015 (0.38) unless otherwise noted.
DPX3
1.437
(36.50)
1.437
(36.50)
.718 (18.24)
.120 (3.05) DIA.
6 HOLES
.718 (18.24)
.120 (3.05) DIA.
6 HOLES
CL
.125 R. TYP.
(3.18)
2.013
(51.13)
2.013
(51.13)
3.740
(95.00)
CL
4.026
(102.26)
3.740
(95.00)
CL
3.220
(81.79)
4.026
(102.26)
1.780
(45.21)
1.780
(45.21)
FRONT MOUNT
REAR MOUNT
1.260
(30.00)
DPX4
3.640 (92.46)
3.120 (79.25)
3.770 (95.76)
1.391
(35.33)
1.391
(32.33)
2.500
(63.50)
CL
2.783
(70.69)
.120 (3.05) DIA.
10 HOLES
1.980
(50.29)
2.783
(70.69)
.125 R. TYP.
(3.18)
.930 (23.62)
2.500
(63.50)
CL
.120 (3.05) DIA.
10 HOLES
1.648
(41.86)
.930 (23.62)
1.648
(41.86)
REAR MOUNT
FRONT MOUNT
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
73
ARINC 404
DPX Crimp
Sealing Plugs - DPX*ME (for environmental requirements)
Material: Teflon
(All others thermoplastic)
A
B
B
A
C
Part
Number
Contact
Size
Color
A
B
C
225-1013-000
22
Black
.063 (1.6)
.040 (1.0)
.469 (11.9)
225-0070-000
20
Red
.085 (2.2)
.065 (1.6)
.469 (11.9)
225-0071-000
16
Blue
.115 (2.9)
.075 (1.9)
.469 (11.9)
225-0072-000
12
Yellow
.171 (4.3)
.121 (3.1)
.564 (14.3)
225-0090-000
#5 and #9 Coax
White
.365 (9.3)
.287 (7.3)
.835 (21.2)
Part
Number
Contact
Size
Color
A
B
C
225-0094-000
22
Black
.069 (1.7)
.051 (1.3)
.420 (10.7)
225-0095-000
20
Red
.083 (2.1)
.069 (1.7)
.350 (8.9)
225-0096-000
16
Blue
.131 (3.3)
.108 (2.7)
.320 (8.1)
225-0097-000
12
Yellow
.187 (4.7)
.156 (4.0)
.320 (8.1)
White
.275 (7.0)
.251 (6.4)
.450 (11.4)
White
.275 (7.0)
.251 (6.4)
1.061 (26.9)
C
Filler Plugs - DPX*
Material: Teflon
(All others thermoplastic)
B
A
C
B
A
225-0098-000
C
225-0099-000
#5 Coax
(Pin)
#5 and #9 Coax
(Socket)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
74
ARINC 404
DPX Accessories
Junction Shells
90 Angle
(DPXA ONLY)
DIECAST STRAIGHT JUNCTION SHELL
.781
(19.84)
1.281
(32.54)
1.781
(45.24)
1.156
(29.36)
2.437
(61.90)
APPROX.
Style
2.312
(58.72)
20745-22
(Left) DPXA
20745-23
(Right) DPX2
20745-10
(Left) DPX2
20745-11
1.875 +_ .031
(47.63 +
_ 0.79)
1.906
(48.41)
.937
(23.80)
Part Number
(Right) DPXA
1.281 (32.54)
1.843 (46.81)
CABLE
ENTRY
.125 R. TYP.
(3.18)
.187 R. TYP.
(4.75)
Style
Part Number
DPXA
22017
(DPXA ONLY)
DIECAST STRAIGHT JUNCTION SHELL
90 ANGLE DPX2
JUNCTION SHELL (SIDE OUTLET)
1.281 (32.54)
1.406 (35.71)
2.406 (61.11)
1.375
(34.93)
1.406 (35.71)
3.406 (86.51)
1.156 (29.36)
.812
(20.62)
2.843 (72.21)
.484 (12.29)
1.281
(32.54)
1.906
(48.41)
2.312
(58.72)
1.156
(29.36)
CABLE ENTRY
.125 R. TYP.
(3.18)
.406 APPROX.
(10.31)
CLINCH
NUTS
1.062 (26.98)
Style
Part Number
DPX2
20745-12
Style
Part Number
DPXA
22017-2
(DPXA ONLY)
DIECAST 90 ANGLE JUNCTION SHELL
STRAIGHT JUNCTION SHELL
2.468 (62.69)
1.906 (48.41)
.837 (21.26)
CABLE ENTRY
1.938 APPROX.
(49.23)
.187 R. TYP.
(4.75)
2.500
(63.50)
CABLE ENTRY
1.282
(32.56)
.932
(23.67)
1.157 (29.39)
1.281
(32.54)
1.406
(35.71)
1.782 (45.26)
Style
Part Number
Style
Part Number
DPXA
20745-21
DPXA
22017-1
DPX2
20745-8
Diecast junction shells may be used on DPXA connectors. They have 4-40 NC-2B tapped mounting holes for
attaching to the shell mounting hardware.
* DPX2 Junction Shells are also used on DPXB connectors.
Dust Caps
Conductive
Conductive
DPXB-60-1 for 34 Shell
DPXA-59 for 33 Shells
Conductive Dust Caps
025-0749-001
025-0767-001
Protect Against
Static Electricity
34
33
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
75
ARINC 404
DPX Accessories
Coaxial Cable Reference Guide
For BKA* DPX Series (Crimp, & Solder)
Refernece MIL-C-17D & DPX NE/NA MIL-C-81659 Series
Max Oper.
Voltage
(Volts
RMS)
Suggested
Alt Cable
Code
Crimp
Type
Coax
Code
Solder
Type
Coax
DPX
NE/NA
Military
BKA*
ARINC
Type Coax
RG/U
Type
Inner
Conductor
Dielectric
Material
DOD
(Inch)
Jacket
Material
O.D
(Inch)
Weight
(lbs/ft)
Max Oper.
Temp, Range
( C)
7
0.0359 "
0.250
PVC
0.370
0.080
-40 + 80
1,000
Use RG63B
l
9
0.0855"
Air-space
PE
PE
0.280
PVC
0.420
0.140
-40 + 80
4,000
Use RG214
R,AC
Size 1(71W1)
55
0.0320 "
PE
0.116
PE
0.032
-55 + 80
1,900
Use RG55B
S
C, J
Size 1(71W1)
58
0.0320"BC
PE
0.116
PVC
0.206
Max.
0.195
0.029
-40 + 80
1,900
Use RG58B
59
0.0253 "
PE
0.146
PVC
0.242
0.032
-40 + 80
2,300
Use RG59B
D,P,G
JAC,AD
A,F,T
C, J, Z
AB
D
59B
0.0230"
PE
0.146
PVC
0.242
0.032
-40 + 80
2,300
62
0.0253"
Air-space
PE
0.146
PVC
0,242
0.038
-40 + 80
750
Use up to
1000 MHz
Use RG62A
A,F,T
E
62A
0.0253"
0.146
PVC
0.242
0.038
-40 + 80
750
71
0.0253"
0.146
PVC
-40 + 80
750
Use RG71B
0.0840"
0.250
FG Braid
0.250
Max.
0.375
0.046
115
Air-space
PE
Air-space
PE
PTFE
0.148
-55 + 250
5,000
Use RG115A
V
142
0.0359"
PTFE
0.116
FG Braid
0.047
-55 + 250
1,900
Use RG142A
S,AE
Size 5/9
Seal 1
142B
0.0390"
PTFE
0.116
FEP
0.206
Max.
0.195
0.050
-55 + 200
1,900
174
0.0189"
PE
0.060
PVC
0.100
0.008
-40 + 80
1,500
D,H,U,
AF
Size 5/9
Seal 2
178
0.0120"
PTFE
0.036
KEL-F
0.079
Max.
0.0054
-40 + 150
1,000
Use RG178B
ER,K,AG,
L,M,AF
179
0.0120 "
PTFE
0,057
KEL-F
0.010
-55 + 150
1,200
Use RG1798
D,H,U,
AF
179B
0.0120"
PTFE
0.063
FEP
0.094
Max.
0.100
Size 5/9
Seal 1
Size 5/9
Seal 1
Seal 2
0.010
-55 + 200
1,200
180
0.0120"
PTFE
0.103
KEL-F
0.019
-40 + 150
1,500
180B
0.0120"
PTFE
0.102
FEP
0.141
Max.
0.145
Max.
0.019
-55 + 200
1,500
187
0.0120"
PTFE
0.060
PTFE
0.010
-55 + 250
1,200
Use RG179B
188
0.0201"
PTFE
0.060
PTFE
0.110
Max .
0.110
Max.
0.011
-55 + 250
1,200
Use RG316
195
0.0120"
PTFE
0.102
PTFE
0.020
-55 + 250
1,500
196
0.0120'
PTFE
0.034
PTFE
0.155
Max.
0.080
Max.
0.006
-55 + 250
1,000
214
0.0888"
PE
0.285
PVC
0.425
0.126
-40 + 80
5,000
R,AC
223
0.035 "
pE
0.116
PVC
0.034
-40 + 80
1,900
C,J
225
0.0936"
PTFE
0.285
FG Braid
0.216
Max.
0.430
0.180
-55 + 250
5,000
316
0.0201
PTFE
0.060
FEP
0.102
0.012
-55 + 200
393
0.0936"
PTFE
0.285
FEP
0.390
0.165
-55 + 200
400
0.0385"
PTFE
0.116
FEP
0.195
0,050
0.0360"
PTFE
0.119
None
0.141
0.032
402
Size 5/9
Seal 1
Size 1(71W1)
Size 5
E
Size 1(71W1)
Size 1(71W1)
Size 1(71W1A)
Size 1(71W1A)
Size 5
Size 5
Size 12
Size 5
Size 5
Size 5
Use RG180B
CAB
B
Size 5/9
Seal 1
Size 5
AB
D,H,U,
AF
D,A,U
AF
A,K
Use RG180B
CAB
B
Use RG178B
E,R,K.
L,AA,AG
AA
1,200
Use RG188A
5,000
1,900
Use RG225
-55 + 200
-55 + 200
2.500
Use RG142B
Size 5
Size 5
A,K
Size 5
Size 5/9
Seal 1
Size 5
Size 1(71W1)
Size 1(71W1A)
Size 5/9
Seal 2
Size 5/9
Seal 2
Size 1(71W1)
Size 1(71W1A)
Size 1(71W1)
Size 1(71W1)
Size 1(71W1A)
NOTE: This table is shown for reference only. ITT Cannon recommends that the above information be used as a guideline and may be subject to variation between
various cable manufacturers. For specific information concerning the actual physical characteristics of a specific cable, contact the manufacturer.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
76