EURO QUARTZ CX1HSM CRYSTAL Miniature SMD Crystal for Series Oscillators 10kHz to 600kHz FEATURES Frequency Range 10kHz to 600kHz High shock resistance Low ageing Designed for low power applications Full MIL testing available OUTLINE & DIMENSIONS DESCRIPTION CX1HSM crystals consist of a high quality tuning fork resonator in a rugged, hermetically sealed ceramic package. CX1VSM is intended for use in Series (two cascaded inverters) oscillator circuits. SPECIFICATION Specifications stated are typical at 25°C unless otherwise indicated. Specifications may change without notice. Frequency Range: 10.0kHz to 600.0kHz Standard Calibration Tolerance*: see table Motional Resistance (R1): Figure 1 Max = 10~169.9kHz, 2x typical 170~600kHz, 2.5x typical Motional Capacitance (C1): Figure 2 Quality Factor (Q): Figure 3 Min. is 0.25x typical Shunt Capacitance (C0): 2.0pF max. Drive Level 10~24.9kHz: 1.5µW max. 25~600.0kHz: 3.0µW max. Turning Point (T0)**: Figure 4 Temperature Coefficient (k): -0.035ppm/°C2 Ageing, first year: 5ppm max. Shock, survival***: 1,000g, 1ms, ½ sine Vibration, survival***: 20g rms, 10~2000Hz Operating Temperature Range Commercial: -10° to +70°C Industrial: -40° to +85°C Military: -55 to +125°C Storage Temperature Range: -55° to +125°C Maximum Process Temperature: +260°C for 20 seconds DIMENSION 'H' Terminations Glass Lid SM1 SM2/SM4 SM3/SM5 Ceramic Lid 1.65 1.70 1.78 1.78 1.83 1.90 STANDARD CALIBRATION TOLERANCE Frequency Range (kHz) 10~74.9 ±30ppm (0.003%) ±100ppm (0.01%) ±1000ppm (0.1%) 75~169.9 170~249.9 250~600 ±50ppm (0.005%) ±100ppm (0.01%) ±1000ppm (0.1%) ±200ppm (0.02%) ±500ppm (0.05%) ±5000ppm (0.5%) ±100ppm (0.01%) ±200ppm (0.02%) ±2000ppm (0.2%) * Tighter frequency calibration is available. ** Other turning point is available *** Higher shock and vibration survival is available PACKAGING OPTIONS CX1HSM crystals are available either tray packed (<250pcs) or tape and reel (>250 pieces). 16mm tape, 178mm or 330mm reels (EIA 418). HOW TO ORDER CX1HSM CRYSTALS CX1H - S 'S' if special, custom design. Otherwise leave blank - C Blank = glass lid C = ceramic lid - SM1 - Terminations SM1 = Gold plated * SM2 = Solder plated SM3 = Solder dipped SM4 = Solder plated * SM5 = Solder dipped * * = Lead free 32.768K 30 Frequency K = kHz Calibration Tolerance @25°C (in ppm) / I Temp. Range C = -10° ~ +70°C I = -40° ~ +85°C M = -55° ~ +125°C S = Customer specified EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk EURO QUARTZ CX1HSM CRYSTAL Miniature SMD Crystal for Series Oscillators SUGGESTED SOLDERING PATTERN 10kHz to 600kHz FIGURE 1 CX1H Typical Motional Resistance R1 CRYSTAL EQUIVALENT CIRCUIT FIGURE 2 CX1H Typical Motional Capacitance C1 R1 Motional Resistance C1 Motional Capacitance L1 Motional Inductance C0 Shunt Capacitance CONVENTIONAL SERIES OSCILLATOR CIRCUIT FIGURE 3 CX1H Typical Quality Factor (Q) TERMINATIONS - PLATING Designation SM1 SM2 SM3 SM4 SM5 Termination FIGURE 4 CX1H Typical Turning Point Temperature (To) Gold Plated (Lead Free) Solder Plated Solder Dipped Solder Plated (Lead Free) Solder Dipped (Lead Free) Turning Point Temperature Note: Frequency f at temperature T is related to frequency F0 at turning point temperature To by: f-fo =k(T-To)2 fo EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk