PRODUCT DATA SHEET Part Number: C8027 Revision Level: 08 1C 22 SBC FMPE OA BS, 2C 18 AWG BC PVC OAS, SIAMESE FR-PVC JKT Date: 05/14/2012 RG 59/U Type Coaxial & 2/C 18 AWG Shielded Siamese CCTV - Cable A. CONSTRUCTION A DIAMETERS 1) CONDUCTOR: #22 AWG 7/30 Bare Copper 0.030” nom. 2) 3) B. 1) 2) INSULATION: BRAID SHIELD: CONSTRUCTION B CONDUCTOR: INSULATION: 0.057” Wall Foamed Polyethylene Bare Copper Braid (95% Coverage) 0.144” nom. 0.171” nom. #18 AWG 16/30 Bare Copper 0.013” Wall Polyvinyl Chloride 0.046” nom. 0.072” nom. 3) SHIELDED CABLE: 2 conductors (Black, Red) – shielded @2.25” LHL with #22 AWG 7/30 Tinned Copper Drain Wire and Aluminum/Polyester Tape (Foil Side-In) 0.149” nom. C. 1) FINAL CABLE JACKET: 2) PRINT LEGEND: D. INDUSTRY APPROVALS 0.032” Wall Polyvinyl Chloride Major dim: 0.470” +/- 0.024” Minor dim: 0.242” +/- 0.012” CAROL (R) -- C8027 -- RG 59/U TYPE COAX – 1C 22 AWG + 2C 18 AWG SHIELDED CL2 (ETL)OR CM c(ETL)us 75C 3084997 — MADE IN USA (MFG CODE; MM/YY & TRU-MARK SEQ. FT. MKGS) UL Standards 13 National Electric Code Type CL2 (ETL) Article 725 UL & CSA Standards 444 National Electric Code EU 2002/95/EC Type CM c(ETL)us Article 800 RoHS Compliant E. ELECTRICAL PROPERTIES 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) TEMPERATURE: SUGGESTED WORKING VOLTAGE (Vrms): CONDUCTOR D.C. RESISTANCE A: CONDUCTOR D.C. RESISTANCE B: SHIELD RESISTANCE A: SHIELD RESISTANCE B: MUTUAL CAPACITANCE A: MUTUAL CAPACITANCE B: GROUND CAPACITANCE B: CHARACTERISTIC IMPEDANCE A: CHARACTERISTIC IMPEDANCE B: Attenuation: -20C to +75C 300V MAX 14.8 Ohms/1000 ft. nom. @ 20 C 6.65 Ohms/1000 ft. nom. @ 20 C 3.00 Ohms/1000 ft. nom. @ 20 C 6.20 Ohms/1000 ft. nom. @ 20 C 17 pF/ft. @ 1 kHz nom. 45 pF/ft. @ 1kHz nom. 81 pF/ft. @ 1kHz nom. 77 Ohms @ 1 MHz nom. 43 Ohms @ 1 MHz nom. FREQ. (MHz) 1 10 50 100 200 500 1000 Note: Data are subject to change without notice. Contact your Customer Service representative for latest information. dB/100 ft. 0.26 0.91 2.09 3.00 4.33 7.03 10.64 Rev.4: ORIGINAL FROM MANCHESTER (JUNE 2, 2005) Rev. 5: Remove CATV from Print legend (January 22, 2009) Rev. 6: Added CATV to Print Legend and other notes – (February 25, 2010 ) GT Rev. 7: remove CATV from print legend / GT (03/15/2010) Rev. 8: revise spec from UL to ETL, Remove AWM GT/ 5/14/12