2KBP08M-E SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 800V Current:2.0A Features KBPM Glass passivated chip junction High case dielectric strength High surge current capability Ideal for printed circuit board Halogen Free Mechanical Data Terminal: Plated leads solderable per MIL-STD 202E, Method 208C Case: UL-94 Class V-0 recognized Halogen Free Epoxy Polarity: As marked on body Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol 2KBP08M-E units Maximum repetitive peak reverse voltage Vrrm 800 V Maximum RMS voltage Vrms 560 V Maximum DC blocking voltage Vdc 800 V Maximum average forward rectified output current Ta =55℃ Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per leg at 3.14A If(av) 2.0 A Ifsm 60 A Vf 1.1 V I2t 15 A2Sec Rating for fusing (t < 8.3ms) Rth(ja) Rth(jc) 5.0 500 30 11 Typical junction capacitance per leg at 4.0V,1MHz Cj 25 pF Operating junction and storage temperature range Tj, Tstg -55 to +150 ℃ Maximum DC reverse current at rated DC blocking voltage per leg Maximum thermal resistance per leg Ta = 25°C Ta = 125°C (Note1) Ir µA ℃/W Note: 1. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.47 x 047" (12 x 12mm) copper pads Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES 2KBP08M-E Rev.A1 www.gulfsemi.com