8 7 6 5 140.00 mm [5.512 in] A D 102.00 mm [4.016 in] B D 94.32 mm [3.713 in] (Inner Box Width) 2.00 mm [0.079 in] (Wall Thickness) C 136.00 mm [5.354 in] 122.00 mm [4.803 in] 73.30 mm [2.886 in] (Inner Box Height) Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Contact Factory [email protected] for quotes Solid models of this enclosure available in STEP or IGES. 98.00 mm [3.858 in] NOTE Purchased assembly includes box, lid, and 4 cover screws. Box and lid are made from Diecast Aluminum Alloy. EVA Foam Gasket supplied with Liquid Resistant Enclosures 84.00 mm [3.307 in] 132.32 mm [5.210 in] (Inner Box Length) B PART NUMBERS SECTION B-B Side View of Assembly 1.47 mm [0.058 in] 1 SECTION A-A End View of Assembly A Top View of Assembly B 2 72.50 mm [2.854 in] 91.00 mm [3.583 in] C 3 76.60 mm [3.016 in] 129.00 mm [5.079 in] B 4 1550K Enclosure Unfinished 1550K Black Textured Polyester Powder Paint 1550KBK 1550WK Liquid Resistant Enclosure (Silicon Factory Installed Gasket) Unfinished 1550WK Black Textured Polyester Powder Paint 1550WKBK Accessories M3.5 x 0.6 (Threaded Holes) 128.07 mm [5.042 in] Top View Looking Inside Box Recommended Torque: 75 ozf.in / 55 cN.m Unfinshed Cover Screws (Pkg 100) [M3.5 x 0.6 18-8 SS] Black Cover Screws (Pkg 100) [M3.5 x 0.6 18-8 SS] 1.50 mm [0.059 in] 90.07 mm [3.546 in] 1550MS100 1550MS100BK A A n4.10 mm [0.161 in] 8 2.90 mm [0.114 in] View Looking inside Lid 7 6 1550K 4.10 mm [0.161 in] 5 4 3 2 1