MUR1005FCT thru MUR1040FCT Glass Passivated Super Fast Rectifiers Reverse Voltage 50 to 400 Volts Forward Current 10.0 Amperes Features Low power loss, high efficiency Low forward voltage, high current capability High surge capacity Super fast recovery times, high voltage ITO-220AB Mechanical Data Case: ITO-220AB full molded plastic package Terminals: Lead solderable per MIL-STD-202, Method 208 Polarity: As marked Standard packaging: Any Weight: 0.08 ounces, 2.24 grams Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol MUR 1005F C T MUR 1010F C T Maximum repetitive peak reverse voltage VRRM 50 Maximum RMS voltage VRMS 35 50 Parameter MUR 1015F C T MUR 1020F C T MUR 1030F C T MUR 1040F C T 100 150 200 300 400 Volts 70 105 140 210 280 Volts 100 150 200 300 400 Unit Maximum DC blocking voltage V DC Maximum average forward rectified current at TC=100oC IF(AV) 10.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 150.0 Amps Maximum instantaneous forward voltage at 5.0A per element VF Maximum DC reverse current at rated DC blocking voltage @TC=25oC @TC=100oC 35 trr CJ 62 3.0 TJ, TSTG -55 to +150 Typical thermal resistance Volts 1. Pulse test: Pulse width 300 usec, Duty cycle 2% 270 uA 50 RθJC Typical junction capacitance at 4.0V, 1MHz Notes: 1.3 10.0 500 IR Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A Operating junction and storage temperature range 0.95 Volts nS pF o C/W o C RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 271 www.kersemi.com