MBR830-MBR8100 Schottky Barrier Rectifiers VOLTAGE RANGE: 30 - 100 V CURRENT: 8.0 A TO-220AC 2.8± 0.1 Features 4.5± 0.2 10.2± 0.2 1.4± 0.2 High s urge capacity. Metal s ilicon junction, m ajority carrier conduction. High current capacity, low forward voltage drop. 8.9± 0.2 19.0± 0.5 11 φ 3.8± 0.15 For us e in low voltage, high frequency inverters , free 1wheeling, and polarity protection applications . PIN 2 1 The plastic material carries U/L recognition 94V-0 3.5± 0.3 13.8± 0.5 2.6± 0.2 Mechanical Data 0.9± 0.1 Cas e:JEDEC TO-220AC,m olded plas tic body 0.5± 0.1 5.0± 0.1 Polarity: As m arked Pos ition: Any Weight: 0.064 ounces,1.81 gram Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 am bient tem perature unles s otherwis e s pecified. Single phase,half wave,60Hz,resistive or inductive load.For capactive load,derate current by 20%. MBR 830 MBR 835 MBR 840 MBR 845 MBR 850 MBR 860 MBR MBR 880 8100 UNITS Maximum recurrent peak reverse voltage V RRM 30 35 40 45 50 60 80 100 V Maximum RMS V oltage V RMS 21 25 28 32 35 42 56 70 V Maximum DC blocking voltage V DC 30 35 40 45 50 60 80 100 V Maximum average forw ard total device11111111 m rectified current @TC = 125°C IF(AV) 8.0 A Peak forw ard surge current 8.3ms single half b sine-w ave superimposed on rated load IFSM 150 A Maximum forw ard (IF=8.0A ,TC=125 ) voltage (I F=8.0A,TC=25 (Note 1) (I F=16A ,TC=25 Maximum reverse current at rated DC blocking voltage ) VF ) @TC =25 @TC =125 IR 0.57 0.70 - 0.70 0.80 0.85 0.84 0.95 - 0.1 0.5 15 50 mA Maximum thermal resistance (Note 2) RθJC 3.0 Operating junction temperature range TJ - 55 ---- + 150 TSTG - 55 ---- + 150 Storage temperature range NOTE: 1. Pulse test:300μs pulse width,1% duty cy cle. 2. Thermal resistance f rom junction to case. http://www.luguang.cn V mail:[email protected] K/W MBR830-MBR8100 Schottky Barrier Rectifiers Ratings AND Charactieristic Curves FIG.2 -- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PERLEG FIG.1 -- FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,AMPERES 10 PEAK FORWARD SURGE CURRENT,AMPERES 175 Resistive or inductive Load 8 6 4 2 0 0 50 100 TJ =TJ max. 8.3ms Single Half Sine Wave (JEDEC Method) 150 125 100 75 50 25 150 CASE TEMPERATURE 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.3 -- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC PERLEG FIG.4 -- TYPICAL REVERSE CHARACTERISTICS 50 10 Pulse width=300 1% Duty Cycle T C=125℃ s TC=25℃ 1 0.1 0.01 0 MBR830-MBR845 MBR850-MBR860 MBR880-MBR8100 .1 .2 .3 .4 .5 .6 INSTANTANEOUS REVERSE CURRENT,MILL AMPERES INSTANTANEOUS FORWARD CURRENT,AMPERES 11111v 40 10 TC=125 1 0.1 0.01 MBR830-MBR860 MBR880-MBR8100 TC=25 0.001 0 20 40 60 80 100 .7 .8 .9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE,VOLTS http://www.luguang.cn PERCENT OF RATED PEAK REVERSE VOLTAGE, mail:[email protected]