Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8705121200 Item: MRX05-1C21 Conditions Coil Data at 20 °C Coil resistance Inductance Coil voltage Rated power Thermal resistance Pull-In voltage Drop-Out voltage = Min Typ Max Unit Max Unit operating temperature + self heating ! Special Product Data Contact-form Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacitance Environmental data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Shock Vibration Ambient temperature Storage temperature Soldering temperature Cleaning Housing material Sealing compound Connection pins Remarks Remarks 1. Conditions Min Typ Form C "# $% &'# '%# %( ) " not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC * + , -' Start Value ! " " . %/ , '/ ! RH <45 %, 200 V test voltage ! 0 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch + + 1 Conditions Min RH <45%, 200 VDC test voltage according to EN 60255-5 1/2 sine wave duration 11ms from 10 - 2000 Hz wave soldering max. 5 sec. Typ ! Max Unit 0 2 " 3 3 4 4 5 5 ! wave soldering max. 5sec. fully sealed Plastics / Polyamid Polyurethan Copper alloy tin plated Reed-Relay to be used for the galvanic separation of intrinsically safe and non-intrinsically safe Modifications in the sense of technical progress are reserved Designed at: 07.12.07 Designed by: WKOVACS Approval at: 07.12.07 Approval by: KOLBRICH Last Change at: 08.11.11 Last Change by: WKOVACS Approval at: 08.11.11 Approval by: CRUF Version: 06 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8705121200 Item: MRX05-1C21 Environmental data Conditions Min Remarks 2. Typ Max Unit circuits with Ex-approval by PTB 01 ATEX 2050 U. Modifications in the sense of technical progress are reserved Designed at: 07.12.07 Designed by: WKOVACS Approval at: 07.12.07 Approval by: KOLBRICH Last Change at: 08.11.11 Last Change by: WKOVACS Approval at: 08.11.11 Approval by: CRUF Version: 06