Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3212172011 Item: DIP12-1A72-11L Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage ( > 20 AT ) Operate time incl. bounce Release time Special Product Data Number of contacts Contact - form Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Case colour Housing material Connection pins Magnetic Shield Reach / RoHS conformity Approval Approval Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact data 66/3 Min ! "# #! !$ % not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ' ( ) *# Start Value & + !, ) #, & RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation & & . & Conditions Min Typ ( ( Max Unit 1 A - NO according to IEC 255-5 40°C, 95% R.H. @ 10 kHz & & . / black mineral filled epoxy FeNi-alloy tinned no yes UL File No. NRNT2.E156887 UL File No. NRNT8.E156887 Modifications in the sense of technical progress are reserved Designed at: 22.04.04 Designed by: SCHELLHORN Approval at: Last Change at: 22.04.04 Last Change by: SCHELLHORN Approval at: 22.09.09 Approval by: Approval by: KOLBRICH Version: 01 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3212172011 Item: DIP12-1A72-11L Environmental data Shock Vibration Operating temperature Soldering temperature Washability Conditions Min Max & 3 wave soldering max. 5 sec. fully sealed Conditions General data Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Total weigth Packaging Typ 2 4 Max Unit 0 0 1 1 Unit 0 Tube per 25 piece Modifications in the sense of technical progress are reserved Designed at: 22.04.04 Designed by: SCHELLHORN Approval at: Last Change at: 22.04.04 Last Change by: SCHELLHORN Approval at: 22.09.09 Approval by: Approval by: KOLBRICH Version: 01