MERRIMAC CBG-20A-500

CBG-A Series
WIDEBAND DIRECTIONAL COUPLER
10 to 1000 MHz / Low 0.2" Profile / Minimal Size and Weight / Surface Mount Package
PRINCIPAL SPECIFICATIONS
Model
Number
GENERAL SPECIFICATIONS
Coupling Frequency
Coupling, Tolerance, Sensitivity,
dB
dB
dB
Bandwidth
MHz
±1
±1
10 to 1000
10 to 1000
CBG-11A-500
CBG-20A-500
11
20
±1
±1
Coupling Value is referred to Input Port
General Notes:
1. Directional couplers find applications in monitoring incident and reflected power,
sampling for control loops as well as signal injection in BITE systems.
2. The 0.25" square surface mount package used in the CBG-A series has been
designed for 50 Ω coplanar systems to optimize RF performance while still achieving
the small size and low profile of surface mount devices. The Kovar input leads are
designed to suit a variety of mounting situations simply by cutting them to the desired
length.
Insertion Loss (above Coupling Value):
10 to 500 MHz:
1 dB max.
500 to 1000 MHz: 1.5 dB max.
Directivity:10 to 300 MHz:
20 dB min.
300 to 800 MHz:
15 dB min.
800 to 1000 MHz: 13 dB min.
Impedance:
50 Ω nom.
VSWR: 10 to 500 MHz:
1.5:1 max.
500 to 1000 MHz: 1.8:1 max.
CW Input:
1 W max.
Weight, Nominal:
0.1 oz. (2.8 g)
Operating Temperature :
-- 55° to +85°C
Surface Mount A-Package Outline
NOTES:
1. Tolerance on 3 place decimals ± .010(.25) except as noted.
2. Max. is largest dimension allowed.
2. Dimensions in inches over millimeters.
4. Untrimmed Lead Length 0.25" (6.35) nominal.
5. All unnumbered tabs are ground.
26Apr96
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531