MITSUMI Film Antenna for Digital Terrestrial Broadcasting Reception DCA-C20 Wireless Communication Components OUTLINE On-vehicle film antenna (dipole antenna) compatible with full-segment / one-segment terrestrial digital broadcasting service Receive and amplify terrestrial digital broadcasting signals (470 to 770MHz). It is a separating structure that antenna element and amplifier are pursued installation. FEATURES 1. No earth sheet is required. 2. Can assure stable characteristics even when the antenna has to be mounted between heater lines on the rear windshield. 3. High gain and low NF characteristics film antenna. 4. Cable length: 5m (standard) / Can be customized to other connector type. SPECIFICATIONS Item Reception frequency Reception polarization Output impedance Noise figure Overall gain Power supply voltage Consumption current Specifications 470~770MHz Horizontal polarization 50Ω 2.0dB typ. 12dBi typ. 5 or 8V 10mA typ. MITSUMI Film Antenna for Digital Terrestrial Broadcasting Reception DIMENSIONS 225 210 Antenna elements 〟 Slit Pull tab to peel off the separator 21 (300µm) Film antenna thickness 9.8 Cable: Equivalent to 1.0D (Black) ㏍ Connector: GT13S-1S-HU (Gray) Cable: Equivalent to 1.0D (Black) 40 Contact Left side antenna unit (with cable and connector) 5.5 0.62 0.62 5.5 AMP CASE Black Mounting tape (with separator) Pull tab to peel off the separator 5000±100 5000±100 Connector: GT13S-1S-HU (Gray) 40 № Pull tab to peel off the separator 9.8 Film Antenna (with separator) AMP CASE Black Mounting tape (with separator) Contact Right side antenna unit (with cable and connector) *For the technical details of the products in this page, please refer to RF / NETWORK Sales Div. Phone : 042-310-4707.