REVISION C DO NOT SCALE FROM THIS PRINT NOTES: 1. .608 STACKER HEIGHT NOT AVAILABLE AS STANDARD. 2. C REPRESENTS A CRITICAL DIMENSION. 3. BURR ALLOWANCE: .0015[0.038] MAX. 4. MINIMUM PUSHOUT FORCE: SIGNAL: .5 LB, GROUND: 1 LB. 5. MAX VARIANCE OF .002[0.05]. 6. DIMENSION APPLIES TO CONTACTS & GROUND PLANES. 7. GROUND PLANE PRESS HEIGHT MUST BE .003[0.08] LESS THAN THE MAX HEIGHT OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE TERMINAL. 8. PARTS TO BE PACKAGED IN TAPE & REEL. 9. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR EIA-481-D REEL WILL BE SUPPLIED. FOR QUANTITIES OF 50-100 PIECES, NO LEADER, TRAILER WILL BE SUPPLIED. 10. PARTS TO BE TRAY PACKAGED ONLY FOR VISION PROCESS. FOR ALL PREVIOUS MANUFACTURING STEPS PARTS ARE TO BE PACKAGED IN LAYERS .090 2.29 REF REF: QMS-XXX-XX.XX-XX-D-XX-XXX-XX C1 .835 21.21 (((26 POS/26) x .840[21.34]) - .005[0.13]) C2 .625 15.88 25 EQ SPACES @ .0250[.635] 01 ACCEPTANCE OF DRAWING ACCEPTED WITH DEVIATIONS LISTED .286 7.26 REF .295±.020 7.48±0.51 02 5 .009 0.23 REF .216 5.49 REF .835 21.21 REF "A" .035±.020 0.89±0.51 1 .250 6.35 REF "A" FAX No: PHONE No: .105 2.67 REF PRINTED NAME CUSTOMER SIGNATURE COMPANY: DATE: 2 .035 0.89 REF .735 18.67 POLARIZATION NOTCHES .040 1.02 REF (TYP) UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS ANGLES .XX: .01[.3] .XXX: .005[.13] .XXXX: .0020[.051] 2 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 1:0.4 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: [email protected] code: 55322 DESCRIPTION: ELEVATED QMS ASSM (22MM STACK) PLATING: CONTACT AREA: .000030 GOLD OVER .000050 NICKEL REMAINDER: .000200 REF TIN OVER .000050 NICKEL DWG. NO. c:\enterprisevault\DWG\MISC\MKTG\ASP-142781-01-MKT.SLDDRW BY: C. RYAN ASP-142781-01 10/17/2008 SHEET 1 OF 3 ASP-142781-01 RECOMMENDED PCB LAYOUT REVISION C .735 18.67 .025 0.64 (TYP) .016 0.41 02 .046 1.17 NPTH (TYP 2 PLCS) .075 1.91 .320 8.13 .020 0.51 .055 1.40 01 CL .625 15.88 .680 17.27 (ALL DIMENSIONS ARE SYMMETRIC ABOUT THE CENTERLINE) IN-PROCESS C3 .010 0.25 REF +.0040 +0.10 .1150 2.921 - .0010 - 0.03 (MEASURED TERMINAL TO TERMINAL) C4 +.0040 +0.10 .6080 15.444 - .0020 - 0.05 (SEE NOTE 5) C4 +.0040 +0.10 .6080 15.444 - .0020 - 0.05 (SEE NOTES 5, 6, &7) .613±.004 15.57±0.10 C5 .004[0.10] C5 .004[0.10] (SEE NOTE 6) 4 .022 0.56 REF .296±.006 7.52±0.15 SECTION "A"-"A" SCALE 5 : 1 3 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. SHEET SCALE: 2.5:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: [email protected] code: 55322 DESCRIPTION: ELEVATED QMS ASSM (22MM STACK) DWG. NO. ASP-142781-01 BY: C. RYAN c:\enterprisevault\DWG\MISC\MKTG\ASP-142781-01-MKT.SLDDRW 10/17/2008 SHEET 2 OF 3 ASP-142781-01 PACKAGING VIEW REVISION C (SEE NOTE 9) 1.732 44.00 ASP-129646-01 SOLD SEPARATELY .040 1.01 WIPE .012 0.31 .866 22.00 RECOMMENDED STACK HEIGHT .945 24.00 USER DIRECTION OF UN-REELING POCKET NOT DETAILED .006 PASTE (TYP) .001 0.03 (TYP) (1OZ COPPER) MATED VIEW USE STANDOFF SO-2200-03-01-02-L-N WHEN MATING PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. SHEET SCALE: 2.5:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: [email protected] code: 55322 DESCRIPTION: ELEVATED QMS ASSM (22MM STACK) DWG. NO. ASP-142781-01 BY: C. RYAN c:\enterprisevault\DWG\MISC\MKTG\ASP-142781-01-MKT.SLDDRW 10/17/2008 SHEET 3 OF 3