REVISION H DO NOT SCALE FROM THIS PRINT ANY REV MADE TO THIS PRINT MUST BE HAVE AN UPDATED MKT PRINT NOTES: 1. 6 ROW, 19 POSITION NOT AVAILABLE AS STANDARD. USE LEAD FREE SOLDER BALLS. 2. C REPRESENTS A CRITICAL DIMENSION. 3. MAXIMUM BURR ALLOWANCE: .0015[0.038] 4. MAXIMUM CUT FLASH: .010[0.25]. 5. MAXIMUM ALLOWABLE BOW: TOP/BOTTOM: .006[0.15], SIDE/SIDE: .003[0.08]. C 6. PARTS TO BE PACKAGED IN TAPE & REEL. FOR QTY'S LESS THAN 125 PCS, NO TRAILER OR LEADER WILL BE SUPPLIED. C 1.050 26.67 C 01 .295±.020 7.49±0.51 .980 24.89 .900 22.86 ((19 POS -1)X.0500[1.270]) .020 0.51 19 A .250 6.35 .155 3.94 REF B C D .105 2.67 REF .350 8.89 REF E F .420 10.67 C REF .460 11.68 REF 2 MAX SWAY (EITHER DIRECTION) 5 1 .005 0.13 "A" .155 3.94 REF .016 0.41 REF (TYP) .100 2.54 REF .442 11.23 REF .083 2.11 .417 10.59 REF .357 9.06 3 C C .004[0.10] 4 "A" COMPONENT PART NUMBER ASP-103598-03-B ASP-103599-01-B T-1R27-12B-H-1 SDB-030-9653 K-850-650 CT-ASP3112MS QUANTITY 1.0000 1.0000 114.00 114.00 .89000 .00571 MATERIAL UL 94V0, COLOR: BLACK UL 94V0, COLOR: BLACK BRASS ALLOY 260, 3/4 HARD LEAD FREE COMPOSITE 96% TIN POLYIMIDE FILM CONDUCTIVE POLYMER SECTION "A"-"A" 2 NON STANDARD ITEM NO. 1 2 3 4 5 6 .073 1.85 REF ASSEMBLY TOOLING PROCESS UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS X .XX: .01 .XXX: .005 .XXXX: .0020 ANGLES 2 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 3:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: VITA 42 (LEAD FREE) SOCKET ASSEMBLY PLATING: CONTACT AREA: .000030 GOLD OVER .000050 NICKEL REMAINDER: .000003 GOLD OVER .000050 NICKEL DWG. NO. F:\DWG\MISC\MKTG\ASP-153860-01-MKT.SLDDRW BY: J. BROWNING 03/04/2010 SHEET 1 OF 2 PACKAGING OTHER 'C' ASP-153860-01 REVISION H RECOMMENDED STENCIL LAYOUT STENCIL TO BE .0060[0.152] THICK .900 22.86 01 .250 6.35 .900 22.86 19 A B C 19 .050 1.27 (TYP) 01 A B D .250 6.35 E F C D E F SEE DETAIL 'B' .050 1.27 (TYP) RECOMMENDED BOARD LAYOUT SCALE 4:1 .0250 0.635 (TYP) .945 24.00 REF .0210 [0.533] .0100 [0.254] TRACE 1.732 44.00 REF "J" "J" .0310 [ 0.787] FREE OD SOLDER MASK .0200 [ 0.508] PAD .0100 [ 0.254] VIA (PLATED) 45° USER DIRECTION OF UN-REELING POCKET NOT DETAILED DETAIL 'B SCALE 12:1 SECTION "J"-"J" SCALE 1 : 1 PACKAGING VIEW SCALE 1:1 PROPRIETARY NOTE .008±.002 0.20±0.05 DETAIL 'C' SCALE 10 : 1 THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. SHEET SCALE: 3:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: VITA 42 (LEAD FREE) SOCKET ASSEMBLY DWG. NO. F:\DWG\MISC\MKTG\ASP-153860-01-MKT.SLDDRW ASP-153860-01 BY: J. BROWNING 03/04/2010 SHEET 2 OF 2