REVISION D BNC7T-P-C-XX-ST-CA6 DESIGNED & DIMENSIONED IN MILLIMETERS[INCHES] GENDER -P: PLUG TYPE -C: CABLE TERMINATION -CA6: RG-6 CABLE ORIENTATION -ST: STRAIGHT PLATING SPECIFICATION -MN: MEDIUM GOLD/NICKEL (SEE NOTES 7 & 8) (SUB-BNC7T-P-C-N-ST-CA6) (BNC7-P-C-M-ST-CA6-PIN) (BNC-FER-001-N) SUB-BNC7T-P-C-XX-ST-CA6 DO NOT SCALE FROM THIS PRINT BNC7T-P-C-X-ST-CA6-PIN BNC-FER-001-X FIG.1 BNC7T-P-C-XX-ST-CA6 SHOWN RECOMMENDED CABLE STRIPPING 3.2 .13 NOTES: D D 1. C REPRESENTS A CRITICAL DIMENSION. 2. PUSHOUT FORCE FOR CENTER CONTACT: 26.69 N [6.0 LB] MIN. 3. SEE SHEET 3 FOR TERMINATION INFORMATION. 4. NOTE DELETED. 5. PRODUCT TO BE PACKAGED PER PACKAGING STANDARD CO-HD-WI-3040-M. 6. RoHs COMPLIANT. 7. COMPONENT PLATING DESIGNATIONS: -M: .000010" MIN. GOLD OVER .000050" MIN. NICKEL. -N: .000100" MIN. NICKEL. 8. ASSEMBLY PLATING DESIGNATIONS: -MN: (CENTER CONTACT)-M: (OUTER CONTACT)-N: (REMAINING METAL PARTS)-N: PRODUCT MANUFACTURED Pb THIS WITH LEAD-FREE PROCESSING 5.4 .21 11.9 .47 F:\DWG\MISC\MKTG\BNC7T-P-C-XX-ST-CA6-MKT.SLDDRW UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS [INCHES] TOLERANCES ARE: DECIMALS ANGLES .X: 0.3 [.01] 2 .XX: 0.13 [.005] .XXX: 0.051 [.0020] MATERIAL: PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHELL, FERRULE, NUT: BRASS CONTACT: BRASS DIELECTRIC: PTFE GASKET: SILICONE SHEET SCALE: 1:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: [email protected] code: 55322 DESCRIPTION: TRUE 75 OHM BNC STRAIGHT PLUG RG-6 DWG. NO. D BNC7T-P-C-XX-ST-CA6 BY: G. HERMAN 09/29/2008 SHEET 1 OF 3 REVISION D 9.00 .354 REF 1.57 .062 REF 12.65 .498 REF 7.60 .299 REF 1.12 .044 REF 1.35 .053 REF 10.00 .394 REF SCALE 5:1 21.70 .854 REF 15.20 .598 REF 14.50 .571 REF 6.85 .270 REF F:\DWG\MISC\MKTG\BNC7T-P-C-XX-ST-CA6-MKT.SLDDRW PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: [email protected] code: 55322 DESCRIPTION: TRUE 75 OHM BNC STRAIGHT PLUG RG-6 DWG. NO. BNC7T-P-C-XX-ST-CA6 BY: G. HERMAN 09/29/2008 SHEET 2 OF 3 REVISION D 3.2 .13 REF RG6 CABLE STRIP AND TIN INNER CONDUCTOR 5.4 .21 REF 11.9 .47 REF BNC-FER-001-X HST-0.500-01-BLK ADD HEAT SHRINK TUBE AND FERRULE BNC7T-P-C-X-ST-CA6-PIN 6.85 .270 (MIN. FLARED ID) 25.0±2.5 .98±.10 FLARE BRAIDED SHIELD AND ADD SIGNAL PIN 0.10 .004 MAX GAP ALLOWABLE C SOLDER SIGNAL PIN C +0.17 +.007 0.16 - 0.03 .006 - .001 (TO CENTER CONTACT) SUB-BNC7T-P-C-XX-ST-CA6 'A' ADD SUB-BNC7T-P-C-XX-ST-CA6 CABLE FOIL WRAP TO BE INSERTED INSIDE CABLE BODY 0.25 .010 MAX GAP ALLOWABLE C CRIMP FERRULE (USE RF CRIMP HAND TOOL #CAT-HT-126667-21 OR EQUIVALENT) 8.17 .322 (HEX CRIMP) C (ACROSS 2 FACES) DETAIL 'A' SCALE 4 : 1 D 0.6 [.03] MAX GAP ALLOWABLE F:\DWG\MISC\MKTG\BNC7T-P-C-XX-ST-CA6-MKT.SLDDRW PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. APPLY HEAT SHRINK TUBE DO NOT SCALE DRAWING SHEET SCALE: 1:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: [email protected] code: 55322 DESCRIPTION: TRUE 75 OHM BNC STRAIGHT PLUG RG-6 DWG. NO. BNC7T-P-C-XX-ST-CA6 BY: G. HERMAN 09/29/2008 SHEET 3 OF 3