SECELECTRONICS A1103

A1103
Unipolar Hall-Effect Digital Switch
Application Examples
Features and Benefits
–
–
–
–
–
–
–
–
–







4.5V to 24V Operation
-40℃ to 150℃ Superior temperature operation
Bipolar technology
Open-collector 25 mA output
Reverse battery protection
Small Size-SOT23 3L or SIP 3L
Solid-state reliability
Resistant to physical stress
Activate with small, commercially available
Permanent magnets
Automotive, Consumer and Industrial
Solid-state switch
Brushless DC motor commutation
Speed detection
Linear position detection
Angular position detection
Proximity detection
3 pin SOT23 (suffix SO)
3 pin SIP (suffix UA)
Functional Block Diagram
VDD
Voltage
Regulatr
OUT
Chopper
Hall
Plate
GND
SIP Package
Pin 1 – V DD
Pin 2 – GND
Pin 3 – OUT
SOT Package
Pin 1 – V DD
Pin 2 – OUT
Pin 3 – GND
1
V1.10 May 1, 2011
A1103
Unipolar Hall-Effect Digital Switch
General Descriptions
The A1103 is a unipolar Hall-effect sensor IC fabricated
from bipolar technology. The device integrates a voltage
regulator, reverse battery protection diode, Hall sensor with
dynamic offset cancellation system, temperature
compensation circuitry, small signal amplifier, Schmitt
trigger and an open-collector output to sink up to 25 mA.
With suitable output pull up, they can be used with bipolar
or CMOS logic circuits.
more stable with both temperature and supply voltage
changes. The unipolar switching characteristic makes these
devices ideal for use with a simple bar or rod magnet.
Thanks to its wide operating voltage range and extended
choice of temperature range, it is quite suitable for use in
automotive, industrial and consumer applications.
The device is delivered in a Small Outline Transistor (SOT)
or in a Plastic Single In Line (SIP 3L flat). Both 3-lead
packages are RoHS compliant.
These Hall-effect switches are monolithic integrated circuits
with tighter magnetic specifications, designed to operate
continuously over extended temperatures to +150℃,and are
Glossary of Terms
MilliTesla (mT),
Gauss
Units of magnetic flux density: 1mT = 10 Gauss
RoHS
Restriction of Hazardous Substances
Operating Point (B OP )
Magnetic flux density applied on the branded side of the package which turns the output
driver ON (V OUT = V DSon )
Release Point (B RP )
Magnetic flux density applied on the branded side of the package which turns the output
driver OFF (V OUT = high)
2
V1.10 May 1, 2011
A1103
Unipolar Hall-Effect Digital Switch
Pin Definitions and Descriptions
SOT Pin №
SIP Pin №
Name
Type
1
1
VDD
Supply
Supply Voltage pin
2
3
OUT
Output
Open Drain Output pin
3
2
GND
Ground
Ground pin
Function
Absolute Maximum Ratings
Parameter
Symbol
Supply Voltage
Value
Units
VDD
28
V
Supply Current
IDD
50
mA
Output Voltage
VOUT
28
V
Output Current
IOUT
50
mA
Storage Temperature Range
TS
-65 to 170
°C
Symbol
Value
Units
Temperature Suffix “E”
TA
-40 to 85
°C
Temperature Suffix “K”
TA
-40 to 125
°C
Temperature Suffix “L”
TA
-40 to 150
°C
Absolute maximum ratings
Operating Temperature Range
Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute-maximum- rated conditions for
extended periods may affect device reliability
3
V1.10 May 1, 2011
A1103
Unipolar Hall-Effect Digital Switch
General Electrical Specifications
DC Operating Parameters T A = 25℃, V DD = 4.5V to 24V (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min
Supply Voltage
VDD
Operating
4.5
Supply Current
IDD
B < B RP
4
Output Saturation Voltage
VDSon
Output Leakage Current
Typ
Max
Units
24
V
5
7
mA
IOUT = 20mA, B > B OP
0.3
0.5
V
IOFF
B < B RP VOUT = 24V
0.1
10
µA
Output Rise Time
tr
RL = 820Ω, CL = 20pF
0.04
2.0
µs
Output Fall Time
tf
RL =820Ω, CL = 20pF
0.18
2.0
µs
Magnetic Specifications
DC Operating Parameters VDD = 4.5V to 24V (unless otherwise specified)
Parameter
Symbol
Operating Point
B OP
Release Point
B RP
Hysteresis
B HYS
Test Conditions
Ta=25℃,Vdd=12V DC
Min
Typ
Max
150
170
190
G
100
125
160
G
45
Units
G
Application Information
4
V1.10 May 1, 2011
A1103
Unipolar Hall-Effect Digital Switch
Package Information
Package UA, 3-Pin SIP:
5
V1.10 May 1, 2011
A1103
Unipolar Hall-Effect Digital Switch
Package LH, 3-Pin SOT-23:
Ordering Information
Part No.
Pb-free
Temperature Code
Package Code
Packing
A1103ESOT
YES
-40°C to 85°C
SOT-23
7-in. reel, 3000 pieces/reel
A1103EUA
YES
-40°C to 85°C
TO-92
Bulk, 1000 pieces/bag
A1103KSOT
YES
-40°C to 125°C
SOT-23
7-in. reel, 3000 pieces/reel
A1103KUA
YES
-40°C to 125°C
TO-92
Bulk, 1000 pieces/bag
A1103LSOT
YES
-40°C to 150°C
SOT-23
7-in. reel, 3000 pieces/reel
A1103LUA
YES
-40°C to 150°C
TO-92
Bulk, 1000 pieces/bag
6
V1.10 May 1, 2011