VISHAY BFC233922473

MKP339 X2
www.vishay.com
Vishay BCcomponents
Interference Suppression Film Capacitors
MKP Radial Potted Type
FEATURES
• AEC-Q200 qualified
• 7.5 mm to 27.5 mm lead pitch
• Supplied loose in box, taped on ammopack
or reel
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
For standard across the line X2 applications.
See also application note: www.vishay.com/doc?28153
QUICK REFERENCE DATA
Capacitance range (E12 series)
Capacitance tolerance
Rated AC voltage
0.001 μF to 4.7 μF (preferred values acc. to E6)
± 20 %; ± 10 %; ± 5 %
310 VAC; 50 Hz to 60 Hz
800 VDC at 85 °C
630 VDC at 110 °C
55/110/56/C for product volumes  1750 mm3
55/110/56/B for product volumes > 1750 mm3
C  470 nF: 110 °C (125 °C for less than 1000 h)
C > 470 nF: 110 °C
Tinned wire
IEC 60384-14 ed-3 and EN 60384-14
IEC 60065 requires pass. flamm. class B for volumes > 1750 mm3
UL 60384-14
CSA-E384-14
CQC
Polypropylene film
Metallized film
Mono construction
Permissible DC voltage
Climatic testing class (according to IEC 60068-1)
Maximum application temperature
Leads
Reference standards
Dielectric
Electrodes
Construction
Encapsulation
Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0
C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation;
code for dielectric material, manufacturer location; manufacturer’s logo;
year and week; safety approvals
Marking
Note
• For more detailed data and test requirements, contact [email protected]
DIMENSIONS in millimeters
l
w
h
lt
P
Revision: 13-May-13
Ø dt
Document Number: 28138
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
COMPOSITION OF CATALOG NUMBER
TYPE AND PITCHES
MULTIPLIER
(nF)
7.5 mm
CAPACITANCE
(numerically)
0.1
2
1
3
22.5 mm
10
4
27.5 mm
100
5
10.0 mm
339
15.0 mm
X2
Example:
104 = 10 x 10 = 100 nF
BFC2
TYPE
PACKAGING
Loose in box
Taped (1)
Loose in box
Taped (1)
Loose in box
339
X2
Taped (1)
PACKAGING
Loose in box
Taped
(1)(2)
Loose in box
Taped (1)(2)
Loose in box
Taped
(1)(2)
339
XX XX X
STANDARD DIMENSIONS
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
Le ad length 5.0 mm ± 1.0 m m
Le ad length 25 .0 mm ± 2.0 m m
Reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm
Ammopack: H = 18.5 mm; P0 = 12.7 mm
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
Lead length 5.0 mm ± 1.0 m m
Lead length 25.0 mm ± 2.0 mm
Reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm
Ammopack: H = 18.5 mm; P0 = 12.7 mm
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
Lead l ength 5. 0 mm ± 1. 0 m m
L l e a d le n g t h 2 5 . 0 mm ± 2 . 0 m m
Reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm
Ammopack: H = 18.5 mm; P0 = 12.7 mm
ALTERNATIVE LARGER PITCH SIZES
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
Lead length 5.0 mm ± 1.0 m m
Lead length 25.0 mm ± 2.0 mm
Reel or ammopack: H = 18.5 mm; P0 = 12.7 mm
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
Le ad length 5.0 mm ± 1.0 m m
Lead length 25 .0 mm ± 2.0 m m
Reel or ammopack: H = 18.5 mm; P0 = 12.7 mm
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
Lead length 5. 0 mm ± 1. 0 m m
Lea d length 25 .0 mm ± 2.0 m m
Reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm
Ammopack: H = 18.5 mm; P0 = 12.7 mm
C-TOL.
± 20 %
± 10 %
±5%
C-TOL.
± 20 %
± 10 %
±5%
CODE NUMBER
BFC2 339 20...
BFC2 339 22...
BFC2 339 24...
B F C 2 3 3 9 2 6. . .
B F C 2 3 3 9 2 8. . .
BFC2 339 10...
BFC2 339 12...
BFC2 339 14...
B F C 2 3 3 9 1 6. . .
B F C 2 3 3 9 1 8. . .
BFC2 339 50...
BFC2 339 52...
BFC2 339 54...
B F C 2 3 3 9 3 6. . .
B F C 2 3 3 9 3 8. . .
CODE NUMBER
BFC2 339 21...
BFC2 339 23...
BFC2 339 25...
BFC2 339 27...
BFC2 339 11...
BFC2 339 13...
BFC2 339 15...
BFC2 339 17...
BFC2 339 51...
BFC2 339 53...
BFC2 339 55...
B F C 2 3 3 9 4 6. . .
B F C 2 3 3 9 4 8. . .
Notes
(1) For detailed tape specification refer to “Packaging Information”: www.vishay.com/doc?28139
(2) Taped on reel pitch = 27.5 mm is not available
Revision: 13-May-13
Document Number: 28138
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA
DESCRIPTION
VALUE
Rated AC voltage (URAC)
310 V
Permissible DC voltage (URDC)
630 V
Tangent of loss angle:
at 1 kHz
at 10 kHz
C < 470 nF
 10 x 10-4
 20 x 10-4
470 nF  C 1 μF
20 x 10-4
70 x 10-4
C > 1 μF
30 x
10-4
-
Rated voltage pulse slope (dU/dt)R at 435 VDC:
Pitch = 7.5 mm
600 V/μs
Pitch = 10 mm
600 V/μs
Pitch = 15 mm
400 V/μs
Pitch = 22.5 mm
150 V/μs
Pitch = 27.5 mm
100 V/μs
R between leads, for C  0.33 μF at 100 V; 1 min
> 15 000 M
RC between leads, for C > 0.33 μF at 100 V; 1 min
> 5000 s
R between leads and case; 100 V; 1 min
> 30 000 M
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time  1000 V/s:
C  1 μF
2200 V; 1 min
C > 1 μF
1800 V; 1 min
Withstanding (AC) voltage between leads and case
2120 V; 1 min
Max. application temperature for 0.001 μF  C  0.47 μF
110 °C (125 °C for less than 1000 h)
Max. application temperature for C > 0.47 μF
110 °C
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 7.5 mm
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
URAC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
AMMOPACK (1)
LOOSE IN BOX
MASS
(g) (2)
SHORT LEADS
It = 3.5 mm
+ 1 mm/- 0.5 mm
It = 5.0 mm
± 1.0 mm
LONG LEADS
SPQ
It = 25.0 mm
± 2.0 mm
H = 18.5 mm
P0 = 12.7 mm
SPQ
SPQ
PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-TOL. = ± 20 %
0.0010
20102
22102
24102
28102
0.0015
20152
22152
24152
28152
0.0022
20222
22222
24222
28222
0.0033
20332
22332
24332
28332
0.0047
310
20472
22472
20682
22682
0.010
20103
22103
24103
28103
0.015
20153
22153
24153
28153
0.022
20223
22223
24223
28223
0.033
20333
22333
24333
28333
0.0068
4.0 x 9.0 x 10.0
0.4
1500
24472
24682
1000
28472
28682
1250
0.047
5.0 x 10.5 x 10.0
0.4
20473
22473
1000
24473
1250
28473
1000
0.068
6.0 x 11.5 x 10.0
0.8
20683
22683
750
24683
1000
28683
750
Revision: 13-May-13
Document Number: 28138
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 7.5 mm
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
URAC
(V)
310
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
AMMOPACK (1)
LOOSE IN BOX
MASS
(g) (2)
SHORT LEADS
It = 3.5 mm
It = 5.0 mm
+ 1 mm/- 0.5 mm
± 1.0 mm
PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-TOL. = ± 10 %
0.0010
10102
12102
0.0012
10122
12122
0.0015
10152
12152
0.0018
10182
12182
0.0022
10222
12222
0.0027
10272
12272
0.0033
10332
12332
0.0039
10392
12392
0.0047
10472
12472
4.0 x 9.0 x 10.0
0.45
0.0056
10562
12562
0.0068
10682
12682
0.0082
10822
12822
0.010
10103
12103
0.012
10123
12123
0.015
10153
12153
0.018
10183
12183
0.022
10223
12223
0.027
10273
12273
0.033
10333
12333
0.039
5.0 x 10.5 x 10.0
0.6
10393
12393
0.047
10473
12473
0.056
6.0 x 11.5 x 10.0
0.8
10563
12563
PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-TOL. = ± 5 %
0.0010
50102
52102
0.0012
50122
52122
0.0015
50152
52152
0.0018
50182
52182
0.0022
50222
52222
0.0027
50272
52272
0.0033
50332
52332
0.0039
50392
52392
0.0047
50472
52472
4.0 x 9.0 x 10.0
0.45
0.0056
50562
52562
0.0068
50682
52682
0.0082
50822
52822
0.010
50103
52103
0.012
50123
52123
0.015
50153
52153
0.018
50183
52183
0.022
50223
52223
0.027
50273
52273
0.033
50333
52333
5.0 x 10.5 x 10.0
0.6
0.039
50393
52393
0.047
50473
52473
6.0 x 11.5 x 10.0
0.8
0.056
50563
52563
LONG LEADS
SPQ
1500
1000
750
1500
1000
750
It = 25.0 mm
± 2.0 mm
14102
14122
14152
14182
14222
14272
14332
14392
14472
14562
14682
14822
14103
14123
14153
14183
14223
14273
14333
14393
14473
14563
54102
54122
54152
54182
54222
54272
54332
54392
54472
54562
54682
54822
54103
54123
54153
54183
54223
54273
54333
54393
54473
54563
H = 18.5 mm
P0 = 12.7 mm
SPQ
1000
1250
1000
1000
1250
1000
SPQ
18102
18122
18152
18182
18222
18272
18332
18392
18472
18562
18682
18822
18103
18123
18153
18183
18223
18273
18333
18393
18473
18563
38102
38122
38152
38182
38222
38272
38332
38392
38472
38562
38682
38822
38103
38123
38153
38183
38223
38273
38333
38393
38473
38563
1250
1000
750
1250
1000
750
Notes
• SPQ = Standard Packing Quantity
(1) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to packaging information
0
(2) Weight for short lead product only
Revision: 13-May-13
Document Number: 28138
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 10 mm
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
URAC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
LONG LEADS
AMMOPACK (1)
LARGE REEL
(500 mm) (1)(2)
H = 18.5 mm
P0 = 12.7 mm
H = 18.5.mm
P0 = 15.0 mm
It = 3.5 mm
It = 5.0 mm
I = 25.0 mm
SPQ t
SPQ
+ 1 mm/- 0.5 mm ± 1.0 mm
± 2.0 mm
SPQ
SPQ
PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 %
0.0010
21102
23102
25102
27102
0.0015
21152
23152
25152
27152
0.0022
21222
23222
25222
27222
0.0033
21332
23332
25332
27332
21472
23472
21682
23682
0.010
21103
23103
25103
27103
0.015
21153
23153
25153
27153
0.022
21223
23223
25223
27223
0.033
21333
23333
25333
27333
0.047
21473
23473
25473
27473
0.0047
0.0068
4.0 x 10.0 x 12.5
0.6
25472
1000
25682
27472
1250
27682
950
-
-
0.068
5.0 x 11.0 x 12.5
0.82
21683
23683
1000
25683
1000
27683
750
-
-
0.100
6.0 x 12.0 x 12.5
1.1
20104
22104
750
24104
750
28104
600
26104
1500
950
-
-
PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 %
310
0.0010
11102
13102
15102
17102
0.0012
11122
13122
15122
17122
0.0015
11152
13152
15152
17152
0.0018
11182
13182
15182
17182
0.0022
11222
13222
15222
17222
0.0027
11272
13272
15272
17272
0.0033
11332
13332
15332
17332
0.0039
11392
13392
15392
17392
0.0047
11472
13472
15472
17472
0.0056
11562
13562
15562
11682
13682
0.0068
4.0 x 10.0 x 12.5
0.6
1000
15682
17562
1250
17682
0.0082
11822
13822
15822
17822
0.010
11103
13103
15103
17103
0.012
11123
13123
15123
17123
0.015
11153
13153
15153
17153
0.018
11183
13183
15183
17183
0.022
11223
13223
15223
17223
0.027
11273
13273
15273
17273
0.033
11333
13333
15333
17333
0.039
11393
13393
15393
17393
0.047
11473
13473
15473
17473
0.056
11563
13563
15563
17563
10683
12683
0.068
0.082
0.100
5.0 x 11.0 x 12.5
0.82
6.0 x 12.0 x 12.5
1.1
Revision: 13-May-13
10823
12823
10104
12104
1000
750
14683
14823
14104
1000
750
18683
18823
18104
750
600
-
-
16683
1900
16823
16104
1500
Document Number: 28138
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 10 mm
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
URAC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
AMMOPACK (1)
LARGE REEL
(500 mm) (1)(2)
H = 18.5 mm
P0 = 12.7 mm
H = 18.5.mm
P0 = 15.0 mm
LONG LEADS
It = 3.5 mm
It = 5.0 mm
I = 25.0 mm
SPQ t
SPQ
+ 1 mm/- 0.5 mm ± 1.0 mm
± 2.0 mm
SPQ
SPQ
PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 5 %
0.0010
51102
53102
55102
48102
0.0012
51122
53122
55122
48122
0.0015
51152
53152
55152
48152
0.0018
51182
53182
55182
48182
0.0022
51222
53222
55222
48222
0.0027
51272
53272
55272
48272
0.0033
51332
53332
55332
48332
0.0039
51392
53392
55392
48392
0.0047
51472
53472
55472
48472
51562
53562
51682
53682
0.0056
0.0068
310
4.0 x 10.0 x 12.5
0.6
55562
1000
55682
48562
1250
48682
0.0082
51822
53822
55822
48822
0.010
51103
53103
55103
48103
0.012
51123
53123
55123
48123
0.015
51153
53153
55153
48153
0.018
51183
53183
55183
48183
0.022
51223
53223
55223
48223
0.027
51273
53273
55273
48273
0.033
51333
53333
55333
48333
0.039
51393
53393
55393
48393
0.047
51473
53473
55473
48473
51563
53563
50683
52683
50823
52823
0.056
0.068
0.082
5.0 x 11.0 x 12.5
0.82
6.0 x 12.0 x 12.5
1.1
1000
750
55563
54683
54823
1000
750
48563
38683
38823
950
750
600
-
46563
36683
36823
-
1900
1500
Notes
• SPQ = Standard Packing Quantity
(1)
H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information
(2)
Reel diameter = 356 mm is available on request
(3)
Weight for short lead product only
Revision: 13-May-13
Document Number: 28138
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 15 mm
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
URAC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
LARGE REEL
(500 mm) (1)(2)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
It = 3.5 mm
± 0.3 mm
It = 5.0 mm
± 1.0 mm
LONG LEADS
SPQ
It = 25.0 mm
± 2.0 mm
H = 18.5 mm
P0 = 12.7 mm
SPQ
SPQ
PITCH = 15 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 %
0.010
90001
90007
90014
90021
0.015
90002
90008
90015
90022
90003
90009
90004
90011
90005
90012
0.022
0.033
5.0 x 11.0 x 17.5
1
0.047
90016
1250
90017
90023
1000
90018
90024
0.068
90006
90013
90019
90026
0.10
21104
23104
25104
27104
20154
22154
0.15
6.0 x 12.0 x 17.5
1.4
1100
90025
1000
24154
1000
26154
900
PITCH = 15 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 %
0.22
7.0 x 13.5 x 17.5
1.8
20224
22224
750
24224
500
26224
800
0.33
8.5 x 15.0 x 17.5
2.4
20334
22334
750
24334
500
26334
650
10.0 x 16.5 x 17.5
3.0
20474
22474
500
24474
450
26474
600
8.5 x 17.5 x 18.0
3.1
90165
90166
300
90143
500
-
-
0.56
11.0 x 18.5 x 18.0
4.3
90174
90175
225
90176
350
-
-
0.68
11.0 x 18.5 x 18.0
5.5
90168
90169
225
90145
350
-
-
0.47
PITCH = 15 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 %
310
0.010
90027
90039
90052
90064
0.012
90028
90041
90053
90065
0.015
90029
90042
90054
90066
0.018
90031
90043
90055
90067
0.022
90032
90044
90056
90068
0.027
90033
90045
90057
90034
90046
0.039
90035
90047
90059
90072
0.047
90036
90048
90061
90073
0.056
90037
90049
90062
90074
0.068
11683
13683
15683
17683
0.082
11823
13823
15823
17823
0.100
11104
13104
15104
17104
0.12
10124
12124
14124
16124
10154
12154
0.033
0.15
5.0 x 11.0 x 17.5
6.0 x 12.0 x 17.5
1.0
1.4
1250
1000
90058
14154
90069
1000
1000
90071
16154
1100
900
PITCH = 15 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 %
0.18
0.22
0.27
0.33
0.33
0.39
0.47
0.56
Revision: 13-May-13
7.0 x 13.5 x 17.5
1.8
8.5 x 15.0 x 17.5
2.4
9.3 x 14.0 x 18.5
2.9
10.0 x 16.5 x 17.5
3.0
11.0 x 18.5 x 18.0
4.3
10184
12184
10224
12224
10274
12274
10334
12334
-
-
10394
12394
10474
12474
90167
90157
750
750
500
225
14184
14224
14274
14334
74334
14394
14474
90144
500
500
500
450
400
16184
16224
16274
16334
16394
16474
-
800
650
600
-
Document Number: 28138
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 15 mm
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
URAC
(V)
DIMENSIONS
wxhxl
(mm)
CAP.
(μF)
LARGE REEL
(500 mm) (1)(2)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
It = 3.5 mm
± 0.3 mm
It = 5.0 mm
± 1.0 mm
LONG LEADS
SPQ
It = 25.0 mm
± 2.0 mm
H = 18.5 mm
P0 = 12.7 mm
SPQ
SPQ
PITCH = 15 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 5 %
0.010
90221
90232
90243
90254
0.012
90222
90233
90244
90255
0.015
90223
90234
90245
90256
0.018
90224
90235
90246
90257
0.022
90225
90236
90247
90258
90226
90237
90227
90238
0.039
90228
90239
90251
90262
0.047
90229
90241
90252
90263
0.056
90231
90242
90253
90264
0.068
51683
53683
55683
46683
0.082
51823
53823
55823
46823
0.10
50104
52104
54104
36104
50124
52124
50154
52154
0.027
0.033
310
5.0 x 11.0 x 17.5
0.12
6.0 x 12.0 x 17.5
0.15
1.0
1.4
90248
1250
1000
90249
54124
54154
90259
1000
1000
90261
36124
36154
1100
900
PITCH = 15 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 %
0.18
7.0 x 13.5 x 17.5
1.8
0.22
0.27
52184
52224
52274
8.5 x 15.0 x 17.5
2.4
50274
50334
52334
10.0 x 16.5 x 17.5
3.0
50394
52394
0.33
0.39
50184
50224
750
54184
500
54224
750
54274
500
54394
36184
800
36224
500
36274
450
36394
54334
650
36334
600
Notes
• SPQ = Standard Packing Quantity
(1) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to packaging information
0
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 22.5 mm
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
URAC
(V)
DIMENSIONS
wxhxl
(mm)
CAP.
(μF)
LARGE REEL
(500 mm) (1)(2)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
It = 3.5 mm
± 0.3 mm
It = 5.0 mm
± 1.0 mm
H = 18.5 mm
P0 = 12.7 mm
LONG LEADS
SPQ
It = 25.0 mm
± 2.0 mm
SPQ
SPQ
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 %
0.15
0.22
310
6.0 x 15.5 x 26.0
2.4
0.33
0.47
7.0 x 16.5 x 26.0
2.9
21154
23154
21224
23224
21334
23334
21474
23474
25154
300
25224
27154
250
25334
200
25474
27224
600
27334
250
27474
500
0.68
8.5 x 18.0 x 26.0
3.8
20684
22684
200
24684
250
26684
450
1.0
10.0 x 19.5 x 26.0
6.8
20105
22105
200
24105
200
26105
350
1.5
12.5 x 22.5 x 26.5
10
90103
90138
140
90139
400
90141
300
Revision: 13-May-13
Document Number: 28138
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 22.5 mm
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
URAC
(V)
DIMENSIONS
wxhxl
(mm)
CAP.
(μF)
LARGE REEL
(500 mm) (1)(2)
LOOSE IN BOX
MASS
(g) (3)
SHORT LEADS
It = 3.5 mm
± 0.3 mm
It = 5.0 mm
± 1.0 mm
H = 18.5 mm
P0 = 12.7 mm
LONG LEADS
SPQ
It = 25.0 mm
± 2.0 mm
SPQ
SPQ
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 %
0.12
11124
13124
15124
17124
0.15
11154
13154
15154
17154
11184
13184
0.18
6.0 x 15.5 x 26.0
2.4
15184
300
17184
250
600
0.22
11224
13224
15224
17224
0.27
11274
13274
15274
17274
0.33
11334
13334
15334
17334
0.33
8.5 x 14.0 x 26.5
3.6
0.39
7.0 x 16.5 x 26.0
-
-
11394
13394
11474
13474
2.9
0.47
-
75334
800
15394
200
-
-
17394
250
15474
500
17474
0.47
8.5 x 14.0 x 26.5
3.6
-
-
-
75474
800
-
-
0.56
8.5 x 18.0 x 26.0
3.8
10564
12564
200
14564
250
16564
450
10684
12684
10.0 x 19.5 x 26.0
6.8
0.68
0.82
14684
200
10824
12824
10105
12105
16684
200
14824
350
16824
310
1.0
12.0 x 22.0 x 26.0
7.8
150
14105
200
16105
300
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 %
0.12
51124
53124
55124
46124
0.15
51154
53154
55154
46154
51184
53184
0.22
51224
53224
55224
46224
0.27
51274
53274
55274
46274
51334
53334
0.18
6.0 x 15.5 x 26.0
2.4
0.33
7.0 x 16.5 x 26.0
2.9
0.39
0.47
8.5 x 18.0 x 26.0
0.68
10.0 x 19.5 x 26.0
1.0
12.0 x 22.0 x 26.0
51394
53394
51474
53474
50564
52564
50684
52684
7.8
52824
50105
52105
500
46394
55474
46474
250
54564
450
36564
54684
36684
200
54824
54105
600
46334
55394
150
46184
250
200
50824
250
55334
200
6.8
0.82
55184
200
3.8
0.56
300
350
36824
200
36105
300
Notes
• SPQ = Standard Packing Quantity
(1) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to packaging information
0
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
Revision: 13-May-13
Document Number: 28138
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 27.5 mm
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
URAC
(V)
CAP.
(μF)
DIMENSIONS
wxhxl
(mm)
LOOSE IN BOX
MASS
(g) (1)
SHORT LEADS
It = 3.5 mm ± 0.3 mm
It = 5.0 mm ± 1.0 mm
LONG LEADS
SPQ
It = 25.0 mm ± 2.0 mm
SPQ
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 %
0.47
90076
9.0 x 19.0 x 31.5
90078
5.5
0.68
90081
100
21684
23684
150
25684
1.0
11.0 x 21.0 x 31.0
7.4
21105
23105
100
25105
125
1.5
13.0 x 23.0 x 31.0
9.2
20155
22155
100
24155
125
2.2
15.0 x 25.0 x 31.5
12.3
20225
22225
100
24225
125
3.3
18.0 x 28.0 x 31.5
16.1
20335
22335
100
24335
100
4.7
21.0 x 31.0 x 31.0
20.3
20475
22475
50
24475
75
100
15684
150
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 %
0.68
9.0 x 19.0 x 31.5
5.5
0.82
1.0
11.0 x 21.0 x 31.0
7.4
1.2
1.5
310
13.0 x 23.0 x 31.0
9.2
15.0 x 25.0 x 31.5
12.3
1.8
2.2
2.7
18.0 x 28.0 x 31.5
16.1
21.0 x 31.0 x 31.0
20.3
3.3
3.9
11684
13684
11824
13824
11105
13105
10125
12125
10155
12155
10185
12185
15824
100
15105
14125
100
14155
12225
10275
12275
10335
12335
125
14225
100
14275
100
14335
50
10395
125
14185
100
10225
125
12395
75
14395
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 %
0.68
9.0 x 19.0 x 31.5
5.5
11.0 x 21.0 x 31.0
7.4
0.82
1.0
1.2
13.0 x 23.0 x 31.0
15.0 x 25.0 x 31.5
12.3
18.0 x 28.0 x 31.5
16.1
2.2
2.7
3.3
21.0 x 31.0 x 31.0
53684
51824
53824
20.3
100
55684
51105
53105
50125
52125
125
55105
54125
100
50155
52155
50185
52185
50225
52225
125
54155
100
54185
52275
50335
52335
125
54225
100
50275
150
55824
100
9.2
1.5
1.8
51684
100
54275
50
54335
75
Notes
• SPQ = Standard Packing Quantity
(1) Weight for short lead product only
Revision: 13-May-13
Document Number: 28138
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
APPROVALS
SAFETY APPROVALS X2
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-3)
UL 60384-14
CSA-E384-14
VOLTAGE
VALUE
FILE NUMBERS
310 VAC
1 nF to 4.7 μF
FI 2008038
1 nF to 4.7 μF
1 nF to 4.7 μF
E354331
E354331
CQC 07001021281 (L)
CQC
310 VAC
1 nF to 4.7 μF
CQC 06001018290 (F)
CB test certificate
310 VAC
1 nF to 4.7 μF
FI 5123
The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the
ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom.
310 VAC
310 VAC
MOUNTING
Normal Use
The capacitors are designed for mounting on printed circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139 or end of catalog.
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches  15 mm capacitors shall be mechanically fixed by the leads.
• For larger pitches the capacitors shall be mounted in the same way and the body clamped.
Space Requirements on Printed Circuit-Board
The maximum space for length (Imax.), width (wmax.), and height (hmax.) of film capacitors to take in account on the printed circuit
board is shown in the drawings:
• For products with pitch  15 mm, w = l = 0.3 mm, h = 0.1 mm
• For products with 15 mm < pitch  27.5 mm, w = l = 0.5 mm, h = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
wmax. = W + Δ
Eccentricity
Imax. = I + Δ
CBA116
hmax. = h + Δ
Seating plane
SOLDERING
For general soldering conditions and wave soldering profile, we refer to the application note: 
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
• Tstg = - 25 °C to + 35 °C, RH maximum 75 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Revision: 13-May-13
Document Number: 28138
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
CHARACTERISTICS
103
ΔC/C
(%)
4
1n
Impedance
(Ω)
typical
2
4.7
102
0
47
10 nF
0n
F
47
0n
10
00 F
nF
47
00
nF
1
10
max.
-2
100
-4
F
nF
10
nF
10-1
min.
-6
- 50
0
50
Tamb (°C)
10-2
104
100
105
106
107
108
f (Hz)
Impedance as a function of frequency
(typical curve)
Capacitance as a function of ambient temperature
(typical curve)
103
f (MHz)
Dissipation
factor (x 10-4)
102
101
102
µF
> 1 µF
C ≤1
C
nF
F<
20
0n C≤2
2
2
nF
<
≤ 47
nF
47 nF < C 10 nF
10
C≤
101
100
101
102
103
104
f (Hz)
105
X2
100
10-1
1
10
100
1000 C (nF) 10 000
Resonant frequency as a function of capacitance
(typical curve)
Tangent of loss angle as a function of frequency
(typical curve)
104
103
AC voltage
(V)
4700 nF
AC current
(mA)
10
3
1000 nF
470 nF
102
100 nF
102
47 nF
101
10 nF
4.7 nF
100
1nF
Tamb ≤ 110 °C
101
101
102
103
104
f (Hz)
Max. RMS voltage as a function of frequency
(typical curve)
Revision: 13-May-13
105
10-1
101
Tamb ≤ 110 °C
102
103
104
f (Hz)
105
Max. RMS current as a function of frequency
(typical curve)
Document Number: 28138
12
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
RC (s)
106
105
104
0
20
40
60
80
100
Tamb (°C)
Insulation resistance as a function of ambient temperature
(typical curve)
APPLICATION NOTES
• For X2 electromagnetic interference suppression in standard across the line applications (50 Hz/60 Hz) with a maximum
mains voltage of 310 VAC.
• For series impedance applications we refer to application note www.vishay.com/doc?28153.
• For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For
information depending of the capacitance value and the number of parallel connections contact: [email protected].
• These capacitors are not intended for continuous pulse application. For these situations capacitors of the AC and pulse
programs must be used.
• The maximum ambient temperature must not exceed 110 °C (125 °C for less than 1000 h) for C  470 nF and 110 °C for
C > 470 nF.
• Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 VDC and
divided by the applied voltage.
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, IEC publication
IEC 60384-14 ed-3 and Specific Reference Data.
Group C Inspection Requirements
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.1 Dimensions (detail)
As specified in section “General data” of this
specification
Initial measurements
Capacitance
Tangent of loss angle:
For C  1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.3 Robustness of terminations
Tensile: Load 10 N; 10 s
Bending: Load 5 N; 4 x 90°
Revision: 13-May-13
No visible damage
Document Number: 28138
13
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.4
Resistance to soldering heat
No pre-drying
Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 10 s
4.19 Component solvent resistance
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min ± 0.5 min
Recovery time:
Min. 1 h, max. 2 h
4.4.2 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  5 % of the value measured initially.
Tangent of loss angle
Increase of tan : 0.008 for: C  1 μF or
0.005 for: C > 1 μF
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1B PART OF SAMPLE OF
SUB-GROUP C1
Initial measurements
Capacitance
Tangent of loss angle:
For C  1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.20 Solvent resistance of the marking
Isopropylalcohol at room temperature
Method: 1
Rubbing material: Cotton wool
Immersion time: 5 min ± 0.5 min
4.6
A = - 55 °C
B = + 110 °C
5 cycles
Duration t = 30 min
Rapid change of temperature
4.6.1 Inspection
Visual examination
4.7
Mounting: see section “Mounting” of this
specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
acceleration 98 m/s2
(whichever is less severe)
Total duration 6 h
Vibration
4.7.2 Final inspection
Visual examination
4.9
Mounting: see section “Mounting” for more
information
Pulse shape: half sine
Acceleration: 490 m/s2
Duration of pulse: 11 ms
Shock
Revision: 13-May-13
No visible damage
Legible marking
No visible damage
No visible damage
Document Number: 28138
14
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1B PART OF SAMPLE OF
SUB-GROUP C1
4.9.2 Final measurements
Visual examination
No visible damage
Capacitance
|C/C|  5 % of the value measured initially.
Tangent of loss angle
Increase of tan : 0.008 for: C  1 μF or
0.005 for: C > 1 μF
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1 
COMBINED SAMPLE OF SPECIMENS OF
SUB-GROUPS C1A AND C1B
4.11
Climatic sequence
4.11.1 Initial measurements
Capacitance
Measured in 4.4.2 and 4.9.2
Tangent of loss angle:
Measured initially in C1A and C1B
4.11.2 Dry heat
Temperature: 110 °C
4.11.3 Damp heat cyclic
Test Db
First cycle
Duration: 16 h


4.11.4 Cold
Temperature: - 55 °C
4.11.5 Damp heat cyclic
Test Db
remaining cycles
Duration: 2 h





4.11.6 Final measurements
Visual examination

No visible damage
Legible marking
Capacitance
|C/C|  5 % of the value measured in 4.11.1.
Tangent of loss angle
Increase of tan : 0.008 for: C  1 μF or
0.005 for: C > 1 μF
Compared to values measured in 4.11.1.

Voltage proof
1350 VDC; 1 min between terminations
No permanent breakdown or flash-over
Insulation resistance
 50 % of values specified in section
“Insulation Resistance” of this specification
SUB GROUP C2
4.12
Damp heat steady state
4.12.1 Initial measurements
Revision: 13-May-13
56 days; 40 °C; 90 % to 95 % RH
no load
Capacitance
Tangent of loss angle: at 1 kHz
Document Number: 28138
15
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB GROUP C2
4.12.3 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  5 % of the value measured in 4.12.1.
Tangent of loss angle
Increase of tan :
 0.008 for: C  1 μF or
 0.005 for: C > 1 μF
Compared to values measured in 4.12.1.
Voltage proof
1350 VDC; 1 min between terminations
No permanent breakdown or flash-over

Insulation resistance
 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C3
4.13.1 Initial measurements
Capacitance
Tangent of loss angle:
For C 1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.13
Impulse voltage
3 successive impulses, full wave, peak
voltage:
X2: 2.5 kV for C  1 μF
X2: 2.5 kV/C for C > 1 μF
Max. 24 pulses
4.14
Endurance
Duration: 1000 h
1.25 x URAC at 110 °C
Once in every hour the voltage is increased
to 1000 VRMS for 0.1 s via resistor of
47  ± 5 %
4.14.7 Final measurements
Revision: 13-May-13
No self healing breakdowns or flash-over
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  10 % compared to values measured
in 4.13.1.
Tangent of loss angle
Increase of tan :
 0.008 for: C  1 μF or
 0.005 for: C > 1 μF
Compared to values measured in 4.13.1.
Voltage proof
1350 VDC; 1 min between terminations
2120 VAC; 1 min between terminations and
case
No permanent breakdown or flash-over
Insulation resistance
 50 % of values specified in section
“Insulation Resistance” of this specification


Document Number: 28138
16
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP339 X2
www.vishay.com
Vishay BCcomponents
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C4
4.15 Charge and discharge
10 000 cycles 
charged to 435 VDC
Discharge resistance:

435 V DC
R = ------------------------------------------------1.25 x C  dU  dt 


4.15.1 Initial measurements
Capacitance
Tangent of loss angle:
For C  1 μF at 10 kHz
For C > 1 μF at 1 kHz
4.15.3 Final measurements
Capacitance
|C/C|  10 % compared to values measured
in 4.15.1.
Tangent of loss angle
Increase of tan :
 0.008 for: C  1 μF or
 0.005 for: C > 1 μF
Compared to values measured in 4.15.1.

Insulation resistance
 50 % of values specified in section
“Insulation Resistance” of this specification
Resonance frequency
0.9 times the value as specified in section
“Resonant Frequency” of this specification.
Bore of gas jet: Ø 0.5 mm
Fuel: butane
Test duration for actual volume V in mm3:
V  250: 10 s
250 < V  500: 20 s
500 < V  1750: 30 s
V > 1750: 60 s
One flame application
After removing test flame from capacitor, the
capacitor must not continue to burn for more
than 10 s. No burning particle must drop
from the sample.
SUB-GROUP C5
4.16
Radio frequency characteristic
SUB-GROUP C6
4.17
Passive flammability
Class B

12 mm
~ 8 mm
45.0°
SUB-GROUP C7
4.18
Active flammability
Revision: 13-May-13
20 cycles of 2.5 kV discharges on the test
capacitor connected to URAC
The cheese cloth around the capacitors shall
not burn with a flame.
No electrical measurements are required.
Document Number: 28138
17
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
BFC233924105 BFC233924224 BFC233924335 BFC233924474 BFC233925104 BFC233912334 BFC233913474
BFC233922105 BFC233922224 BFC233922473 BFC233912105 BFC233920103 BFC233920225 BFC233922684
BFC233924154