Not for New Designs 047 RMS www.vishay.com Vishay BCcomponents Aluminum Capacitors Radial Miniature Semi-Professional FEATURES • Useful life: 1500 h at 105 °C • Miniaturized, high CV-product per unit volume • Charge and discharge proof • Polarized aluminum electrolytic capacitors, non-solid electrolyte 036 RSP • Radial leads, cylindrical aluminum case with pressure relief, insulated with a blue sleeve lower CV-values 047 RMS 105 °C • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 longer life 048 RML lower Z 136 RVI APPLICATIONS 85 °C miniaturized miniaturized 038 RSU 148 RUS 150 RMI • EDB, telecommunication, industrial, automotive and audio-video • Smoothing, filtering, buffering in SMPS, timing • Portable and mobile equipment (small size, low mass) Fig. 1 MARKING QUICK REFERENCE DATA DESCRIPTION The capacitors are marked (where possible) with the following information: VALUE Nominal case sizes (Ø D x L in mm) Rated capacitance range, CR • Rated capacitance value (in μF) 10 x 12 to 18 x 35 100 μF to 10 000 μF Tolerance on CR • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) ± 20 % Rated voltage range, UR Category temperature range 16 V to 63 V Endurance test at 105 °C 1000 h Useful life at 105 °C 1500 h Useful life at 40 °C, 1.3 x IR applied • Date code, in accordance with IEC 60062 • Code indicating factory of origin • Name of manufacturer 150 000 h Shelf life at 0 V, 105 °C Based on sectional specification • Rated voltage (in V) - 40 °C to + 105 °C • Upper category temperature (105 °C) 500 h IEC 60384-4/EN130300 Climatic category IEC 60068 • Negative terminal identification 40/105/56 • Series number (047) SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 16 25 35 40 50 63 100 - - - - - 10 x 12 220 - - 10 x 12 - 10 x 16 10 x 20 330 - - 10 x 16 10 x 20 - 12.5 x 20 470 10 x 12 10 x 16 10 x 20 - 12.5 x 20 12.5 x 25 1000 10 x 20 12.5 x 20 12.5 x 25 - 16 x 25 16 x 31 2200 12.5 x 25 16 x 25 16 x 31 16 x 35 18 x 35 18 x 35 3300 16 x 25 16 x 31 18 x 35 18 x 35 18 x 35 - 4700 16 x 31 18 x 35 18 x 35 - - - 6800 16 x 35 18 x 35 - - - - 10 000 18 x 35 - - - - - Revision: 12-Apr-13 Document Number: 28314 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs 047 RMS www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS ØD ØD L L F 15 min. 4 +1 0 5 min. Ød Ød F Fig. 2 - Form CA: Long leads Fig. 3 - Form CB: Cut leads Fig. 4 - Form TFA: Taped in box (ammopack) Table 1 DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL CASE CODE Ød Ø Dmax. Lmax. F MASS (g) FORM CA FORM CB FORM TFA 10 x 12 14 0.6 10.5 13.5 5.0 ± 0.5 1.6 1000 500 800 10 x 16 15 0.6 10.5 17.5 5.0 ± 0.5 1.9 500 500 800 10 x 20 16 0.6 10.5 22.0 5.0 ± 0.5 2.2 500 500 800 12.5 x 20 17 0.6 13.0 22.0 5.0 ± 0.5 4.0 500 500 500 PACKAGING QUANTITIES 12.5 x 25 18 0.6 13.0 27.0 5.0 ± 0.5 5.0 250 250 500 16 x 25 19 0.8 16.5 27.0 7.5 ± 0.5 8.0 250 250 250 16 x 31 20 0.8 16.5 33.5 7.5 ± 0.5 9.0 100 100 250 16 x 35 21 0.8 16.5 37.5 7.5 ± 0.5 11.5 100 100 - 18 x 35 22 0.8 18.5 37.5 7.5 ± 0.5 14.5 100 100 - Note • For detailed tape dimensions please see www.vishay.com/doc?28360 Revision: 12-Apr-13 Document Number: 28314 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs 047 RMS www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Electrolytic capacitor 047 series DESCRIPTION CR Rated capacitance at 100 Hz, tolerance ± 20 % 1000 μF/35 V; ± 20 % IR Rated RMS ripple current at 100 Hz, 105 °C Nominal case size: Ø 12.5 mm x 25 mm; form TFA IL1 Max. leakage current after 1 min at UR tan Ordering code: MAL2 047 30102 E3 Max. dissipation factor at 100 Hz Z Max. impedance at 10 kHz or 100 kHz Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 16 25 35 40 50 63 CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) IR 100 Hz 105 °C (mA) IL1 1 min (μA) tan 100 Hz ORDERING CODE MAL2047... Z 100 kHz () FORM CA FORM CB FORM TFA 35471E3 BULK PACKAGING TAPED 470 10 x 12 330 78 0.16 0.33 55471E3 65471E3 1000 10 x 20 540 160 0.16 0.17 55102E3 65102E3 35102E3 2200 12.5 x 25 830 360 0.20 0.10 55222E3 65222E3 35222E3 3300 16 x 25 1100 530 0.22 0.08 55332E3 65332E3 35332E3 4700 16 x 31 1300 760 0.24 0.07 55472E3 65472E3 35472E3 6800 16 x 35 1600 1100 0.28 0.06 55682E3 65682E3 - 10 000 18 x 35 1800 1600 0.36 0.05 55103E3 65103E3 - 470 10 x 16 360 120 0.14 0.25 56471E3 66471E3 36471E3 1000 12.5 x 20 630 250 0.14 0.13 56102E3 66102E3 36102E3 2200 16 x 25 990 550 0.18 0.08 56222E3 66222E3 36222E3 3300 16 x 31 1200 830 0.20 0.07 56332E3 66332E3 36332E3 4700 18 x 35 1500 1200 0.22 0.05 56472E3 66472E3 - 6800 18 x 35 1700 1700 0.26 0.04 56682E3 66682E3 - 220 10 x 12 270 80 0.12 0.38 50221E3 60221E3 30221E3 330 10 x 16 350 120 0.12 0.28 50331E3 60331E3 30331E3 470 10 x 20 450 170 0.12 0.22 50471E3 60471E3 30471E3 1000 12.5 x 25 780 350 0.12 0.12 50102E3 60102E3 30102E3 2200 16 x 31 1200 770 0.16 0.07 50222E3 60222E3 30222E3 3300 18 x 35 1500 1200 0.18 0.05 50332E3 60332E3 - 4700 18 x 35 1800 1600 0.20 0.04 50472E3 60472E3 - 330 10 x 20 380 140 0.12 0.26 57331E3 67331E3 37331E3 2200 16 x 35 1200 880 0.16 0.06 57222E3 67222E3 - 3300 18 x 35 1500 1300 0.18 0.04 57332E3 67332E3 31221E3 220 10 x 16 310 110 0.10 0.33 51221E3 61221E3 470 12.5 x 20 540 240 0.10 0.17 51471E3 61471E3 31471E3 1000 16 x 25 940 500 0.10 0.09 51102E3 61102E3 31102E3 2200 18 x 35 1400 1100 0.14 0.05 51222E3 61222E3 - 3300 18 x 35 1600 1700 0.16 0.04 51332E3 61332E3 - 100 10 x 12 210 66 0.09 0.65 58101E3 68101E3 38101E3 220 10 x 20 350 140 0.09 0.32 58221E3 68221E3 38221E3 330 12.5 x 20 470 210 0.09 0.22 58331E3 68331E3 38331E3 470 12.5 x 25 620 300 0.09 0.16 58471E3 68471E3 38471E3 1000 16 x 31 1100 630 0.09 0.08 58102E3 68102E3 38102E3 2200 18 x 35 1500 1400 0.13 0.04 58222E3 68222E3 - Revision: 12-Apr-13 Document Number: 28314 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs 047 RMS www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA DESCRIPTION Voltage Surge voltage Reverse voltage Current CONDITIONS VALUE Us 1.15 UR Urev 1 V After 1 min at UR After 5 min at UR IL1 0.01 CR x UR + 3 μA IL5 0.002 CR x UR + 3 μA Case Ø D = 10 mm Case Ø D 12.5 mm Typ. 16 nH Typ. 18 nH Calculated from tan max. and CR (see Table 2) ESR = tan /2fCR Leakage current Inductance Equivalent series inductance (ESL) Resistance Equivalent series resistance (ESR) RIPPLE CURRENT AND USEFUL LIFE CCC206 3.8 IA 3.7 IR 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 Lifetime multiplier 2.6 0 1. 2.4 5 1. 0 2. 2.2 0 3. 0 4. 2.0 0 6. 0 8. 1.8 20 30 (1) 60 Useful life at 105 °C and IR applied: 1500 h 0 10 0 15 00 2 (1) 1.4 1.2 1.0 0.8 0.5 0.0 12 1.6 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz, 105 °C 40 50 60 70 80 90 100 110 Tamb (°C) Fig. 5 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 3 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) 50 100 300 1000 3000 10 000 Revision: 12-Apr-13 UR = 16 V AND 25 V 0.95 1.00 1.07 1.12 1.15 1.20 IR MULTIPLIER UR = 35 V AND 40 V 0.85 1.00 1.20 1.30 1.35 1.40 UR = 50 V AND 63 V 0.80 1.00 1.25 1.40 1.50 1.60 Document Number: 28314 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs 047 RMS www.vishay.com Vishay BCcomponents Table 4 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4/ EN130300 subclause 4.13 PROCEDURE (quick reference) REQUIREMENTS Tamb = 105 °C; UR applied; 1000 h C/C: ± 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 105 °C; UR and IR applied; 1500 h C/C: ± 45 % tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit no short or open circuit total failure percentage: 1 % Shelf life (storage at high temperature) IEC 60384-4/ EN130300, subclause 4.17 Tamb = 105 °C; no voltage applied; 500 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement C/C: ± 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL5 2 x spec. limit Revision: 12-Apr-13 Document Number: 28314 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000