part number: description: 10-00648 Cable, 100 mm, USB A receptacle to USB B male, 28 AWG, 30-00088 wire date: August 24, 2011 rev: A page: 1 of 2 Specifications: connector description (1) USB A receptacle, nickel-plated overmold (2) inner: 30P, PVC, black; outer: 60P, PVC, black wire description (3) 4C, 1PR + 2C, 28 AWG, UL2725, 30V, 80C, 3.8 mm, AL spiral + drain, VW-1, PVC, 60P, USB 2.0, P/N 30-00088 cable outer diameter Ø3.8 mm cable color black cable length 100 ± 15 mm connector description (4) USB B, male, nickel-plated overmold (5) 30P, PVC, black label (6) tensility.com, Made in China, Tensility P/N Notes: Function test: no open, no reversed polarity, no short circuit, no INT RoHS compliant Mechanical drawing: Units: mm Wiring diagram: tolerance X: ±0.5 mm .X: ±0.3 mm .XX: ±0.05 mm applicable unless otherwise indicated in specification or on drawings Tensility International Corporation reserves the right to substitute parts which are functionally equivalent to the ones specified. Initial Date part number: description: 10-00648 Cable, 100 mm, USB A receptacle to USB B male, 28 AWG, 30-00088 wire date: August 24, 2011 rev: A page: 2 of 2 Revision notes: Rev Date Description A August 24, 2011 initial release Specification Approval Spec sign-off verifies that you have reviewed the entire specification, tested a sample of the product, and confirm that it meets your requirements. This specification reflects the part as it will be ordered. Orders will not be processed until the specification pages have been initialed and the approval page has been signed. This specification is confidential and is not to be transmitted without prior approval from Tensility. Signature Title NameDate CompanyBranch