Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Polyamide PA 6.6 | Modular feed-through terminals | 16 mm² General ordering data Order No. Part designation Version EAN Qty. Product notes Note, ordering data Note, technical data PT OKIECEx/ATEX rating data EU-type examination certificate Download, German Download English IECEx Certificate of Conformity ATEX voltage ATEX current ATEX conductor cross-section IECEx voltage IECEx current IECEx conductor cross-section Voltage when using cross-connections Operating temperature range 0271080000 SAK 16 BL Feed-through terminal, 16 mm², Screw connection, PA 66, blue, TS 32 4008190097578 50 pc(s). If QIs are aligned side by side, then a TW/AP must be used. Twin wire end ferrules ZH 2.5 - ZH 16 can be used. Marking EN 60079-7 Marking ATEX Directive 94/9/EC KEMA97ATEX1798U KEMA97ATEX1798U_d.pdf KEMA97ATEX1798U_e.pdf IECEXKEM06.0014U 690 V 66 A 16 mm² 690 V 66 A 16 mm² CrossConnectionGuide.pdf Einsatztemperaturbereich siehe EGBaumusterprüfbescheinigung/IECEx-Certificate of Conformity Ex e II Ex II 2 G D Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals No. of levels No. of terminal strips per level Open sides Operating temperature range Type of connection Type of mounting UL 94 flammability rating of insulation material Version blue on side Yes No TS 32 PA 66 No 1 1 2 right - 50 °C, + 100 °C Screwed Snap-on V2 Feed-through terminal -1- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Polyamide PA 6.6 | Modular feed-through terminals | 16 mm² CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 600 V 87 A AWG 14 AWG 6 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 4 mm² 16 mm² Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Clamping screw Blade size Tightening torque range Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) Twin wire-end ferrule, min. Twin wire end ferrule, max. AWG conductor size, min. AWG conductor size, max. AWG conductor size, min. AWG conductor size, max. 2.5 mm² 16 mm² Screw connection screwed on side 2 15 mm M4 1.0 x 5.5 mm 2.0...4.0 Nm B6 2.5 mm² 10 mm² 4 mm² 16 mm² 4 mm² 16 mm² 4 mm² 16 mm² 16 mm² 16 mm² 1.5 mm² 10 mm² AWG 12 AWG 6 3.31 mm² 16 mm² Dimensions Width Height of lowest version Length TS 32 offset 12 mm 57.5 mm 50 mm 25 mm Rating data Rated cross-section Rated voltage Rated impulse voltage 16 mm² 1,000 V 8 kV -2- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 32 | Polyamide PA 6.6 | Modular feed-through terminals | 16 mm² Rating data Rated current Standards Current with max. conductor Pollution severity 76 A IEC 60947-7-1 76 A 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 600 V 80 A AWG 12 AWG 4 Approvals Approvals institutes Classifications ETIM 2.0 ETIM 3.0 eClass 4.1 eClass 5.0 eClass 5.1 EC000897 EC000897 27-14-11-20 27-14-11-20 27-14-11-20 Similar products Order No. 0271060000 Part designation SAK 16 Version Feed-through terminal, 16 mm², Screw connection, PA 66, beige, TS 32 -3-