Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 | Installation terminals General ordering data Order No. Part designation Version EAN Qty. Product notes Note, technical data Product description Note, accessories 0501470000 NT 6/35 10X3 KRG/BL Neutral conductor modular terminal, 6 mm², Screw connection, PA 66, blue, TS 35 4008190041052 100 pc(s). Tightening torque via disconnector is 0.5 ... 0.8 Nm. These NT modular terminals are prescribed for insulation measurements without detaching the conductors according to VDE standards for places of public assembly. Refer to the "Accessories" section for PEN bridges and additional clamping-yoke versions. Use of twin wire-end ferrules on request. Additional technical data Colour of insulating material Connection direction End plate required Installation advice Insulating material Levels cross-connected internally No. of terminal strips per level Open sides Operating temperature range Type of connection Type of mounting UL 94 flammability rating of insulation material Version blue on side Yes TS 35 PA 66 No 2 right - 60 °C, + 130 °C Screwed Snap-on 5VA Neutral conductor disconnect terminal CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 300 V 40 A AWG 20 AWG 10 -1- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 | Installation terminals Conductors for clamping (additional connection) Stranded, max. Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Clamping screw Blade size Tightening torque range Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) AWG conductor size, min. AWG conductor size, max. 10 mm² 0.5 mm² 6 mm² 0.5 mm² 10 mm² Screw connection screwed on side 2 12 mm M 3.5 0.8 x 4 mm 0.8...1.4 Nm A5 0.5 mm² 10 mm² 0.5 mm² 10 mm² 0.5 mm² 10 mm² 0.5 mm² 6 mm² 0.5 mm² 6 mm² AWG 20 AWG 10 Dimensions Width Height of lowest version Length 8 mm 44 mm 49 mm N-conductor disconnect terminal For N-busbar 3 x 10 mm Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Standards Current with max. conductor Pollution severity 6 mm² 400 V 6 kV 41 A IEC 60947-7-1 41 A 3 UL rating data Voltage (UL) 300 V -2- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 | Installation terminals UL rating data Current (UL) Min. cross-section (UL) Max. cross-section (UL) 40 A AWG 22 AWG 8 Approvals Approvals institutes Classifications ETIM 2.0 ETIM 3.0 eClass 4.1 eClass 5.0 eClass 5.1 EC001257 EC001257 27-14-11-20 27-14-11-38 27-14-11-38 Similar products Order No. 0471880000 Part designation NT 10/35 10X3 BL 0499280000 NT 16/35 10X3 BL 0471780000 NT 2.5/35 10X3 BL Version Neutral conductor modular terminal, 10 mm², Busbar connection, PA 66, blue, TS 35 Neutral conductor modular terminal, 16 mm², Busbar connection, PA 66, blue, TS 35 Neutral conductor modular terminal, 2.5 mm², Screw connection, PA 66, blue, TS 35 -3-