WURTH 760871038

Spezifikation für Freigabe / specification for release
Preliminary
Kunde / customer :
Artikelnummer / part number :
Bezeichnung :
description :
760871038
Netzteil-Übertrager WE-UNIT
Off-line transformer WE-UNIT
DATUM / DATE : 2010-01-08
A Mechanische Abmessungen / dimensions :
1
5
4
A
B
C
D
E
C
8
EE13/6/6
A
15.75 max.
18.50 max.
15.00 max.
mm
mm
mm
mm
mm
B
= Marking Pin 1
Eigenschaften /
properties
Induktivität /
inductance
Windungszahlverhältnis /
turns ratio
DC-Widerstand N1 /
DC-resistance N1
DC-Widerstand N2 /
DC-resistance N2
DC-Widerstand N3 /
DC-resistance N3
Sättigungsstrom N1 /
saturation current N1
Streuinduktivität /
leakage inductance
Hochspannung /
hipot test
Testbedingungen /
test conditions
C Lötpad / soldering spec. :
Wert / value
Einheit / unit
tol.
mH
±10%
10 kHz / 0,1 V
L0
1.85
N1:N2:N3
TR
5.76:1:1.18
±3%
@ 20°C
RDC1
4.6
max.
@ 20°C
RDC2
110.0
m
max.
@ 20°C
RDC3
650.0
m
max.
dL/L=20%
Isat
230.0
mA
typ.
100 kHz / 0,1V
short N2
3mA, 1s
N1, N3 => N2
Ls
20.0
µH
typ.
HV
4.5
kV
3 x 3,81
8
5
1
4
10,16
B Elektrische Eigenschaften / electrical properties :
ø1,1
D Prüfgeräte / test equipment :
E Testbedingungen / test conditions :
WK3260B für / for L und / and R
Luftfeuchtigkeit / humidity:
33%
Umgebungstemperatur / temperature:
F Werkstoffe & Zulassungen / material & approvals :
+20°C
G Eigenschaften / general specifications :
Basismaterial / base material:
Ferrit/ ferrite
Betriebstemp. / operating temperature: -40°C - + 125°C
Spulenkörper / Bobbin:
UL-V0
Umgebungstemp. / ambient temperature: -40°C - + 85°C
Draht / wire:
TBr
It is recommended that the temperature of the part does
Kontaktmaterial / contact plating:
Cu-Ni-Sn
not exceed 125°C under worst case operating conditions.
Tränklack / Varnish:
V1630FS or equiv.
Schaltfrequenz / Switching frequency: 100 kHz
Bauteil für Netzanwendung / Off-line transformer
Freigabe erteilt / general release:
..................................................................................
Datum / date
...............................................
Geprüft / checked
Kunde / customer
..................................................................................
Unterschrift / signature
Würth Elektronik
..................................................
Kontrolliert / approved
TBr
Revision 01
TBr
Revision 00
2009-11-13
Name
Änderung / modification
Datum / date
2010-01-08
Würth Elektronik eiSos GmbH & Co.KG
D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400
http://www.we-online.com
SEITE 1 VON 2
Spezifikation für Freigabe / specification for release
Preliminary
Kunde / customer :
Artikelnummer / part number :
Bezeichnung :
description :
760871038
Netzteil-Übertrager WE-UNIT
Off-line transformer WE-UNIT
DATUM / DATE : 2010-01-08
H Schaltbild / Schematics
3
N1
125-385V
7
N2
12V-18V / 0.42A
output power max. = 7W
2
1
N3
14-18V/0,03A
6
4
Freigabe erteilt / general release:
..................................................................................
Datum / date
...............................................
Geprüft / checked
Kunde / customer
..................................................................................
Unterschrift / signature
Würth Elektronik
..................................................
Kontrolliert / approved
TBr
Revision 01
TBr
Revision 00
2009-11-13
Name
Änderung / modification
Datum / date
2010-01-08
This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating thi s component into any equipment where higher safety and reliability is especially required
or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuc lear control, submarine, transportation, (automotive control, train control, ship control),
transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be info rmed before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Würth Elektronik eiSos GmbH & Co.KG
D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400
http://www.we-online.com
SEITE 2 VON 2