SIM card 6-pin Contact bend prevention design Manual connector Product Name：FMS006-5000-0 ■ Feature ◆ Manual type ◆ Low profile design H=1.5㎜ ◆ Top mount ◆ Contact bend prevention design ■ Packing Quantity ◆ EMI prevention design 1,000pcs/ Tape and Reel ◆ RoHS compliant ■ Material & Plating ◆ Pb-free soldering capable Product Name Metal Shell Cover Insulator Contact ■ Specification Current Rating Voltage Rating Insulation Resistance Withstanding Voltage Contact Resistance 0.5A 5V AC rms 500MΩ Minimum at 500V DC 250V AC rms 1 minute at 1mA/20mV Initial value：100mΩ Max. Finished test：40mΩ Max. Material & Plating SUS, Ni-Au Heat Resistance Plastic Copper Alloy, Ni-Au Operating Temperature -25℃～ +85℃ Durability 5,000cycles Outline Dimension Recommended Foot Pattern Connector outline Soldering tub pad Soldering tub pad Indicates pattern prohibited area. Tolerance ±0.05 unless specified ※ Please request latest drawing and specification when this P/N is considered to adopt. Inquiry：Yamaichi Electronics Co.,Ltd. CS Business Planning Section TEL 03-3778-6160 w FAX 03-3778-6177 Specification in this document is as for reference on representative p/n of each series and may change without prior notice. Since product improvement entails changes to electrical, material and mechanical properties, the purchasing party is strongly recommended to inquire the latest specification before placing purchase order. All other service, product and company names mentioned herein are the trademark or registered trademarks of their respective owners. Issued: 2009 Aug. w Rev.A