E-Series RF 1:1 Transformer 0.07 - 200 MHz ETMO1-1T V3.00 Features ● ● R-7 1:1 Impedance Ratio CT on Secondary Specifications @ 25°C Frequency Range 0.07 - 200 MHz Insertion Loss 0.07 - 200 MHz 0.1 - 150 MHz 0.2 - 80 MHz Maximum 3 dB 2 dB 1 dB Amplitude Imbalance 0.07 - 80 MHz 0.07 - 200 MHz Maximum 0.2 dB 1.0 dB Phase Imbalance 0.07 - 80 MHz 0.07 - 200 MHz Maximum 2° 5° Output Impedance 100 MHz 100 Ohms ±5% Schematic PRI SEC Pin Configuration Ordering Information Part No. ETMO1-1T Packaging Tubes Absolute Maximum Ratings Parameter RF Power DC Current Operating/Storage Temp. Dimensions in ( ) are in mm. Unless Otherwise Noted: .x = ±0.04 (1.00) .xx = ±0.02 (0.50) .xxx = ±0.010 (0.250) WEIGHT (APPROX.): 0.06 OUNCES 1.6 GRAMS Absolute Maximum 250 mW 30 mA -20°C to +85°C Function Primary dot Primary Secondary dot Secondary Secondary CT Case Ground Not Connected Pin No. 1 5 2 6 4 7 3,8 * Pins must be connected together externally. S 0207 D Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020