Ethernet DC/DC Converter EPC1005P ELECTRONICS INC. • Designed for Low Common Mode Noise • • Fuse Protected • • 70% Min. Efficiency at Full Load @ Nominial Input Voltage • • Input Filter to Reduce Input Ripple Current • (Less than 10 mA p-p Typical) • Input/Output Isolation : 500 Vrms • Electrical Specifications Parameters Min. Typ. Units Max. 7.5 12 16 Volts Output Voltage -8.55 -9 -9.45 Volts Output Current --- --- 250 mA Output Ripple & Noise @ 20 MHz BW --- --- 100 mV p-p Input Ripple Current --- --- 10 mV p-p Input Voltage (for specified output) Pin Connections V in4 V o3 1 2 Package E4 -9V PCA EPC1005P Date Code V in+ V o+ +12V White Dot Pin 1 A Dimensions C F Dim. A B C D E F G H E ØH Leads D 1 2 4 3 B PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 G CSC1005P Rev. F Min. (Inches) Max. Nom. Min. (millimeters) Max. Nom. 1.280 1.300 1.290 32.51 33.02 32.77 .780 .800 .790 19.81 20.32 20.07 --.530 ----13.46 ------- 1.100 ----- 27.94 .110 --.140 2.79 --3.56 ----.015 ----.381 ----.600 ----- 15.24 --.--- .025 ----.635 3/20/01 Product performance is limited to specified parameters. Data is subject to change without prior notice. TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com