Bussmann® 5 x 20mm Ferrule Fuses GMD GMD-V Time-Delay 21.10mm (±.81) 10mm 20mm (±2.0) (±0.5) 125mA 160mA 200mA 1.6A 5.54mm (±.20) 1.5A 2A 2.5A 3A 750mA 800mA Time-Current Characteristic Curves–Average Melt 1A 38.10mm (±.38) 300mA 400mA 500mA 630mA Dimensional Data AMPERE RATING 100 38.10mm (±.38) 5.2mm (+0.1/-0.2) 10 Glass tube - end caps: nickel or silver-plated brass. CATALOG SYMBOL: GMD TIME-DELAY 250 VOLTS AC 125mA - 3A UL LISTED, STD. 248-14 (GUIDE # JDYX, FILE E75865) 4A UL RECOGNIZED (GUIDE # JDYX2, FILE E75865) TIME IN SECONDS .81mm (REF) 1 .1 Limits for Pre-arcing Time In 1.35 In MAX MAX 2.0 In MIN 125mA - 4A 60 min. 5 sec. 2 min. Product Symbol Lead 10 100 Packaging & Ordering Information: 1 .01 .1 1.1 In: Æt ² 70°C, 125mA - 3A. 1.0 In: Æt ² 70°C, 4A. CURRENT IN AMPERES Ampere Rating Package Code Blank (None) V Axial Leads .0329 x 1.59 Copper Tinned GMD Markings: MFG mark, Rated Current, Rated Voltage, Product Symbol, Approvals where Applicable. CE logo denotes compliance with European Union Low Voltage Directive (50-1000 VAC, 75-1500 VDC). Refer to BIF document #8002 or contact Bussmann Application Engineering at 314-527-1270 for more information. 12-18-98 SB98107 Rev. A Form No. GMD Page 1 of 2 BIF Doc #2019 Bussmann® 5 x 20mm Ferrule Fuses GMD GMD-V Time-Delay 250 100A/250 VAC 10kA/125 VAC p.f. = 0.7 - 0.8 200A/250 VAC 10kA/125V, p.f. = 1 Voltage Drop (mV) max. 1600 1200 1200 1100 1100 950 800 750 650 600 550 450 450 410 380 310 280 245 240 220 200 195 190 190 Pre-arcing Value (I2t) (A2s) typ. 0.043 0.046 0.11 0.20 0.20 0.40 0.65 0.89 0.89 1.2 1.4 3.1 3.1 4.7 6.6 12 16 16 25 27 42 94 145 300 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • JIS Breaking Capacity CSA Rated Voltage (VAC) U.R. Current Rating (In) 125mA 150mA 160mA 187mA 200mA 250mA 300mA 315mA 375mA 400mA 500mA 600mA 630mA 750mA 800mA 1A 1.2A 1.25A 1.5A 1.6A 2A 2.5A 3A 4A U.L. Electrical Characteristics • • • • • • • • The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-18-98 SB98107 Rev. A Form No. GMD Page 2 of 2 BIF Doc #2019