HMC352MS8 v00.0901 MICROWAVE CORPORATION MIXER IC w/ INTEGRATED LO AMPLIFIER, 1.7 - 2.5 GHz Typical Applications Features This device is suitable for applications: Integrated LO Amplifier w/ Pdiss < 20 mW • MMDS Conversion Loss / Noise Figure: 7.0 dB • PCMCIA Low LO Drive: 0 dBm • WLAN Input IP3: >+13 dBm • WCDMA Single Positive Supply: 3V to 5V Functional Diagram The HMC352MS8 is a single balanced mixer IC with an integrated LO amplifier. This converter can operate as an upconverter and downconverter between 1.7 GHz and 2.5 GHz. With the integrated LO amplifier, the mixer requires an LO drive level of only 0 dBm, and requires only 6 mA from a single positive +3V rail. The mixer has 7 dB of conversion loss, an input P1dB of +5 dBm and an input third order intercept point of >+13 dBm at 2 GHz. 5 MIXERS - SMT General Description Guaranteed Performance, LO Drive= 0 dBm, +25 Deg °C I F = 100 MHz LO= 0 dBm & Vdd= 3V Parameter Min. Typ. Units Max. Frequency Range, RF & LO 1.7 - 2.5 GHz Frequency Range, I F DC - 1.0 GHz Conversion Loss 7 9.5 dB Noise Figure (SSB) 7 9.5 dB LO to RF I s olation 9 20 - 25 dB LO to I F I s olation 7 15 - 20 dB RF to IF Isolation 10 15 - 20 dB I P 3 (Input) 10 13 dBm 1 dB Compression (I n put) -2 4 dBm Supply Voltage (Vdd) 3.0 Vdc Supply Current (I d d) 6 mA * Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 5 - 112 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] HMC352MS8 v00.0901 MICROWAVE CORPORATION MIXER IC w/ INTEGRATED LO AMPLIFIER, 1.7 - 2.5 GHz Conversion Gain vs. GaAs MMIC PUMPED MIXER 17 Isolation @ LO = 0 dBm Temperature @ LO =SUB-HARMONICALLY 0 dBm 0 +25 C -40 C +85 C -5 RF/IF LO/RF LO/IF -5 -10 ISOLATION (dB) CONVERSION GAIN (dB) 0 - 25 GHz -10 -15 -15 -20 -25 -30 1.8 2 2.2 2.4 2.6 -35 1.6 2.8 1.8 FREQUENCY (GHz) -5 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 0 -10 2.6 2.8 LO = -6 dBm LO = -4 dBm LO = -2 dBm LO = 0 dBm LO = +2 dBm LO = +4 dBm -10 -15 LO RF 5 -20 1.8 2 2.2 2.4 2.6 2.8 1 1.5 FREQUENCY (GHz) 2 2.5 3 3.5 4 FREQUENCY (GHz) Conversion Gain vs. Vdd @ LO = 0 dBm IF Bandwidth @ LO = 0 dBm 0 0 +2.7V +3.0V +3.3V -5 -5 RESPONSE (dB) CONVERSION GAIN (dB) 2.4 Return Loss @ LO = 0 dBm 0 -20 1.6 2.2 FREQUENCY (GHz) Conversion Gain vs. LO Drive -15 2 MIXERS - SMT -20 1.6 -10 -10 -15 -15 -20 CONVERSION GAIN RETURN LOSS -20 1.6 -25 1.8 2 2.2 2.4 FREQUENCY (GHz) 2.6 2.8 0 0.2 0.4 0.6 0.8 1 1.2 IF FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] 5 - 113 HMC352MS8 v00.0901 MICROWAVE CORPORATION MIXER IC w/ INTEGRATED LO AMPLIFIER, 1.7 - 2.5 GHz Input P1dB vs. Upconverter Performance GaAs MMIC SUB-HARMONICALLY PUMPED MIXER - 25 Temperature @ LO = 017 dBm Conversion Gain @ LO = 0 dBm 0 8 7 -5 +25 C -40 C +85 C 6 INPUT P1dB (dBm) CONVERSION GAIN (dB) GHz -10 -15 5 4 3 2 1 -20 1.6 5 1.8 2 2.2 2.4 2.6 1.9 2 FREQUENCY (GHz) 15 15 INPUT IP3 (dBm) INPUT IP3 (dBm) 20 10 5 2 2.1 2.3 2.2 2.3 2.4 0 1.8 2.5 1.9 2 2.1 2.2 2.3 2.5 Input P1dB vs. Vdd @ LO = 0 dBm 10 20 9 +2.7V +3.0V +3.3V 8 INPUT P1dB (dBm) 15 INPUT IP3 (dBm) 2.4 FREQUENCY (GHz) Input IP3 vs. Vdd @ LO = 0 dBm* 10 5 +2.7V +3.0V +3.3V 1.9 2 2.1 2.2 2.3 2.4 7 6 5 4 3 2 1 2.5 FREQUENCY (GHz) 0 1.8 1.9 2 2.1 2.2 2.3 FREQUENCY (GHz) * Two-tone input power= -10 dBm each tone, 1 MHz spacing. 5 - 114 2.5 +25 C -40 C +85 C FREQUENCY (GHz) 0 1.8 2.4 10 5 -2 dBm 0 dBm +2 dBm 1.9 2.2 Input IP3 vs. Temperature @ LO = 0 dBm* 20 0 1.8 2.1 FREQUENCY (GHz) Input IP3 vs. LO Drive* MIXERS - SMT 0 1.8 2.8 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] 2.4 2.5 HMC352MS8 v00.0901 MICROWAVE CORPORATION MIXER IC w/ INTEGRATED LO AMPLIFIER, 1.7 - 2.5 GHz MXN Spurious @ IF Port Outputs @ LO = 0 dBm Harmonics of LO = 0 dBM nLO mRF 0 1 0 XX -8 1 10 0 2 35 47 3 69 4 >72 2 nLO Spur @ RF Por t 3 4 LO Freq. (GHz) 1 -2 22 23 1.75 25 26 36 1.9 53 41 45 68 70 51 >72 >72 >72 3 10 3 16 23 12 4 19 27 2.05 18 8 20 41 62 2.2 34 18 19 32 >72 2.35 26 30 23 31 2.5 21 20 25 32 LO = 0 dBm All values in dBc below input LO level @ RF por t. 4 5 MIXERS - SMT RF = 2.0 GHz @ -10 dBm LO = 1.9 GHz @ 0 dBm All values in dBc relative to the IF power level. 2 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] 5 - 115 v00.0901 HMC352MS8 MICROWAVE CORPORATION MIXER IC w/ INTEGRATED LO AMPLIFIER, 1.7 - 2.5 GHz Absolute Maximum Ratings RF / IF Input (Vdd = +3V) +13 dBm LO Drive (Vdd = +3V) +13 dBm Vdd 5.5V Continous Pdiss (Ta= 85 °C) (derate 2.64 mW/°C above 85 °C) 238 mW IF DC Current ± 3 mA Storage Temperature -65 to +150 deg C Operating Temperature -55 to +85 deg C 5 MIXERS - SMT Pin Locations & Outline Drawing 1. MATERIAL: A. PACKAGE BODY - LOW STRESS INJECTION-MOLDED PLASTIC, SILICA & SILICONE IMPREGNATED. B. LEADFRAME MATERIAL: COPPER ALLOY 2. PLATING: LEAD-TIN SOLDER PLATE 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). UNLESS OTHERWISE SPECIFIED ALL TOL. ARE ±0.005 (±0.13). 5 - 116 4. CHARACTERS TO BE HELVETICA MEDIUM, APPROX. 030 HIGH, WHITE INK, LOCATED APPROXIMATELY AS SHOWN. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15 mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25 mm PER SIDE. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] HMC352MS8 v00.0901 MICROWAVE CORPORATION MIXER IC w/ INTEGRATED LO AMPLIFIER, 1.7 - 2.5 GHz Pin Description Pin Number Function Description 1 LO Por t 2, 4, 6, 7 GND Ground: Pin must connect to RF ground. 3 Vdd Power supply for the LO Amplifier. Two external RF bypass capacitor (10 pF & 10,000 pF) are required. 5 IF Por t IF Por t: This pin is DC coupled. For applications not requiring operation to DC, this por t should be DC blocked externallyusing a series capacitor whose values has been chosen to pass the necessar y IF frequency range. For operation to DC, this pin must not source/sink more than 3mA of current or die nonfunction and possible die failure will result. 8 RF Por t RF Por t: This pin is AC coupled and matched to 50 ohm from 1.7 - 2.5 GHz. Interface Schematic LO Por t: This pin is AC coupled and matched to 50 ohm from 1.7 - 2.5 GHz For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] MIXERS - SMT 5 5 - 117 HMC352MS8 v00.0901 MICROWAVE CORPORATION MIXER IC w/ INTEGRATED LO AMPLIFIER, 1.7 - 2.5 GHz Evaluation PCB for HMC352MS8 MIXERS - SMT 5 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Evaluation Circuit Board Layout Design Details Item Description J1 - J4 PC Mount SMA RF Connector C1 10 pF Chip Capacitor, 0603 Pkg. C2 .01 µF Chip Capacitor, 0603 Pkg. R1 0 Ohm Resistor, 0805 Pkg. U1 HMC352MS8 Mixer PCB* 103928 Evaluation Board * Circuit Board Material: Rogers 4350 5 - 118 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] v00.0901 HMC352MS8 MICROWAVE CORPORATION MIXER IC w/ INTEGRATED LO AMPLIFIER, 1.7 - 2.5 GHz HMC352MS8 Application Circuit MIXERS - SMT 5 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] 5 - 119