LSIU80LVD Ultra2 LVD SCSI Host Adapter • High-performance desktop PCs and workstations The LSIU80LVD PCI-to-Ultra2 SCSI host adapter offers a low cost LVD SCSI connection for external storage ideal for backup or disaster recovery applications. • Intersystem connections: server and workstation to RAID, network management IDEAL FOR DIRECT ATTACH STORAGE KEY APPLICATIONS • Ultra2 and Ultra SCSI tape drives in servers, workstations and high-end desktops FEATURES • High performance single channel Ultra2 SCSI solution • Supports Ultra2 (80 MBps), Ultra (40 MBps) and Fast (20 MBps) SCSI • Support LVD or Single-Ended (SE) SCSI devices • SureLINK™ Domain Validation technology ensures data integrity • Supports One-Button Disaster Recovery for tape drives for rapid data recovery Host Bus: 32-bit PCI SCSI Bus: 16-bit SE and LVD SCSI Performance: Ultra2 (80 MBps) SCSI Connectors: Internal: 68-pin HD External: 68-pin HD No. of SCSI Devices: 15 As part of LSI Logic’s SCSI host adapter product family, the LSIU80LVD PCI-Ultra2 SCSI host bus adapter is ideal for direct attach storage of tape and optical drive/libraries to a workstation or server. The Ultra2 LVD connection offers higher performance at 80 MBps, longer cable length of 12 meters and higher reliability than Ultra SCSI at an affordable price. The LSIU80LVD supports wide (16-bit) Ultra2, Ultra, and Fast SCSI devices. System design flexibility is provided by the LSIU80LVD’s ability to automatically switch from single-ended operation for legacy Fast/Ultra devices to universal low voltage differential (LVD) operation when LVD enabled or Ultra2 devices are connected. The LSIU80LVD HBA incorporates LSI Logic’s LVDlink™ (Low Voltage Differential) technology for superior performance, device connectivity and greater signal reliability. The LVDlink transceivers provide the data reliability of differential signaling without the high cost of high voltage differential (HVD) transceivers WARRANTY For more than 15 years, LSI Logic host adapters have been providing highperformance SCSI solutions to leading server, disk array and computer systems worldwide. Each host adapter carries a powerful chip built in LSI Logic’s ISO 9001-certified fabrication facilities. Using only the highest quality components, LSI Logic host adapters are assembled and tested in world-class facilities to assure superior product reliability and performance. Due to LSI Logic’s stringent quality management programs, this host adapter carries a threeyear limited warranty. Single-ended (SE) Technology Cable lengths (meters) Device supported LVD Fast, Ultra2 Ultra2* 3 12 (devices) 25 point-to-point Single-ended LVD *Backward compatible with Fast and Ultra single-ended SCSI devices. L S I U 8 0 LV D O R D E R I N G I N F O R M AT I O N LSIU80LVD ISA/EISA bracket LSIU80LVD Ultra2 LVD SCSI Host Adapter 32-bit, 33 MHz max For more information please visit the LSI Logic web sites at: PCl Modes Bus master DMA http://storageio.lsilogic.com PCI Data Burst Transfer Rate 132 MB/second (PCI 32-bit bus @ 33 MHz) http://adapters.lsilogic.com PCI Card Type Universal add-in card (3.3V and 5.0V signaling) PCI Voltage +5V ±5% LSI Logic Corporation PCI Form Factor 3.5” x 6.0” PCI Power 7.5 Watts, 1.5A @ +5VDC Technical Specifications PCI Bus Certification Level PCI 2.1 SCSI Bus Wide Ultra2, LVD (Low Voltage Differential) and Ultra Wide SE (Single-Ended) SCSI Processor LSI53C895 Connectors External Internal 68-pin HD 68-pin HD North American Headquarters Milpitas, CA Tel: 866 574 5741 (within U.S) 408 954 3108 (outside U.S.) Host Adapter Group Southborough, MA Tel: 888 429 0425 FAX: 508 485 0303 Termination Universal (LVD/SE) termination Automatic cable detection LED Indicators 4-pin header for off-board LEDs BIOS Flash Memory 128K x 8 flash EEPROM Environments Operating Storage Temperature 0°C to 55°C -40°C to +105°C Relative Humidity 5 to 90% non-condensing 5 to 90% non-condensing MTBP >500,000 hours LSI Logic KK Headquarters Compliances CE, VCCI, Canada, C-Tick, FCC class B, UL 94VO Tokyo, Japan Tel: 81 3 5463 7165 Fax 81 3 5463 7820 LSI Logic Europe Ltd. Software Support OS Support Versions Windows 95, 98, Me, NT4.0, SP4 and above, 2000, and XP Linux 2.2 and 2.4 kernels Utilities Install, FIash, SCSI format, BIOS configuration, and NT configuration Device Support OBDR (tape booting) and bootable CD-ROM INSTALLATION INSTRUCTION FOR WINDOWS NT4.0 AND 2000 Windows 2000, XP and .NET have the driver included on the Windows CD 1. Create Windows driver disk for the LSI Logic SCSI card (download from web site) http://adapters.lsilogic.com 2. Boot with Windows CD 3. Press F6 key when the screen displays “Setup is inspecting your computer’s hardware configuration” 4. Choose “S” to specify an additional device when the screen displays “Setup has recognized the following mass storage devices in your computer...” a) Install the driver disk made in step 1 in the floppy drive and follow instructions 5. Continue with the Windows install 6. Install the latest service pack 2 European Headquarters United Kingdom Tel: 44 1344 426544 Fax: 44 1344 481039 ISO 9001 Certified The LSI Logic logo design and LVDlink are trademarks or registered trademarks of LSI Logic Corporation. All other brand and product names may be trademarks of their respective companies. LSI Logic Corporation reserves the right to make changes to any products and services herein at any time without notice. LSI Logic does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by LSI Logic; nor does the purchase, lease, or use of a product or service from LSI Logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or of third parties. Copyright ©2002 by LSI Logic Corporation. All rights reserved. Order No. S20115 7/02-1M – Printed in USA