DM54LS366A/DM74LS366A Hex TRI-STATEÉ Inverting Buffer General Description This device contains six independent gates each of which performs an inverting buffer function. The outputs have the TRI-STATE feature. When enabled, the outputs exhibit the low impedance characteristics of a standard LS output with additional drive capability to permit the driving of bus lines without external resistors. When disabled, both the output transistors are turned off presenting a high-impedance state to the bus line. Thus the output will act neither as a significant load nor as a driver. To minimize the possibility that two outputs will attempt to take a common bus to opposite logic levels, the disable time is shorter than the enable time of the outputs. Connection Diagram Dual-In-Line Package TL/F/6428 – 1 Order Number DM54LS366AJ, DM54LS366AW, DM54LS366AE, DM74LS366AM or DM74LS366AN See NS Package Number E20A, J16A, M16A, N16E or W16A Function Table YeA Inputs Output G1 G2 A Y H X L L X H L L X X L H Hi-Z Hi-Z H L H e High Logic Level L e Low Logic Level X e Either Low or High Logic Level Hi-Z e TRI-STATE (Outputs are disabled) TRI-STATEÉ is a registered trademark of National Semiconductor Corporation. C1995 National Semiconductor Corporation TL/F/6428 RRD-B30M105/Printed in U. S. A. DM54LS366A/DM74LS366A Hex TRI-STATE Inverting Buffer September 1991 Absolute Maximum Ratings (Note) Note: The ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the ‘‘Electrical Characteristics’’ table are not guaranteed at the absolute maximum ratings. The ‘‘Recommended Operating Conditions’’ table will define the conditions for actual device operation. If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage 7V Input Voltage 7V Operating Free Air Temperature Range b 55§ C to a 125§ C DM54LS DM74LS 0§ C to a 70§ C b 65§ C to a 150§ C Storage Temperature Range Recommended Operating Conditions Symbol DM54LS366A Parameter DM74LS366A Units Min Nom Max Min Nom Max 4.5 5 5.5 4.75 5 5.25 VCC Supply Voltage VIH High Level Input Voltage VIL Low Level Input Voltage 0.7 0.8 V IOH High Level Output Current b1 b 2.6 mA IOL Low Level Output Current 24 mA TA Free Air Operating Temperature 70 §C 2 2 V 12 b 55 125 V 0 Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Symbol Parameter Conditions Min Typ (Note 1) Max Units b 1.5 V VI Input Clamp Voltage VCC e Min, II e b18 mA VOH High Level Output Voltage VCC e Min, IOH e Max VIL e Max, VIH e Min VOL Low Level Output Voltage VCC e Min, IOL e Max VIL e Max, VIH e Min DM54 0.25 0.4 DM74 0.35 0.5 IOL e 12 mA, VCC e Min DM74 0.25 0.4 VCC e Max, VI e 7V DM74 VCC e Max, VI e 10.0V DM54 II Input Current @ Max Input Voltage 2.4 IIH High Level Input Current VCC e Max, VI e 2.7V IIL Low Level Input Current VCC e Max, VI e 0.5V (Note 4) A Input VCC e Max, VI e 0.4V (Note 5) A Input VCC e Max, VI e 0.4V G Input IOZH IOZL IOS ICC 3.4 V V 0.1 mA 20 mA b 20 mA b 0.4 mA b 0.4 Off-State Output Current with High Level Output Voltage Applied VCC e Max, VO e 2.4V VIH e Min, VIL e Max 20 mA Off-State Output Current with Low Level Output Voltage Applied VCC e Max, VO e 0.4V VIH e Min, VIL e Max b 20 mA Short Circuit Output Current VCC e Max (Note 2) Supply Current VCC e Max (Note 3) DM54 b 30 b 130 DM74 b 20 b 100 Note 1: All typicals are at VCC e 5V, TA e 25§ C. Note 2: Not more than one output should be shorted at a time, and the duration should not exceed one second. Note 3: ICC is measured with the DATA inputs grounded and the OUTPUT CONTROLS at 4.5V. Note 4: Both G inputs are at 2V. Note 5: Both G inputs at 0.4V. 2 12 21 mA mA Switching Characteristics: DM54LS Symbol Parameter CL e 50 pF Min Max DM74LS RL e 667X CL e 50 pF Min Max Units CL e 150 pF Min Max tPLH Propagation Delay Time Low to High Level Output 12 15 25 ns tPHL Propagation Delay Time High to Low Level Output 22 16 25 ns tPZH Output Enable Time to High Level Output 24 30 35 ns tPZL Output Enable Time to Low Level Output 30 30 40 ns tPHZ Output Disable Time from High Level Output (Note 6) 25 20 ns tPLZ Output Disable Time from Low Level Output (Note 6) 20 20 ns Note 6: CL e 5 pF. 3 Physical Dimensions inches (millimeters) Ceramic Leadless Chip Carrier Package (E) Order Number DM54LS366AE NS Package Number E20A 16-Lead Ceramic Dual-In-Line Package (J) Order Number DM54LS366AJ NS Package Number J16A 4 Physical Dimensions inches (millimeters) (Continued) 16-Lead Small Outline Molded Package (M) Order Number DM74LS366AM NS Package Number M16A 16-Lead Molded Dual-In-Line Package (N) Order Number DM74LS366AN NS Package Number N16E 5 DM54LS366A/DM74LS366A Hex TRI-STATE Inverting Buffer Physical Dimensions inches (millimeters) (Continued) 16-Lead Ceramic Flat Package (W) Order Number DM54LS366AW NS Package Number W16A LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.