SPDT RF Switch 10 - 2000 MHz SW-118 V2.00 DI-4 Features ● ● ● ● Integral Driver, TTL Low Loss – 0.6 dB Typical High Isolation – 50 dB Typical Fast Switching Speed – 50 nSec Typical Guaranteed Specifications* (From -55°C to +85°C) Dimension in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) WEIGHT (APPROX.): 0.21 OUNCES 6 GRAMS Operating Characteristics SW-118 RF IN RF 1 RF 2 RF 3 RF 4 19 1 13 N/A N/A PINS UNMARKED ARE GROUND +V 3 CTL 4 Truth Table CONDITION OF SWITCH RF PATH RF-IN TO RF1 RF-IN TO RF2 OFF ON ON OFF CONTROL INPUT LOGIC HIGH LOGIC LOW Control logic is CMOS or open collector TTL with external pull up to +V MIL-STD-883 screening available. *All specifications apply when operated with bias voltage of ±15 VDC and 50 ohm impedance at all ports Ordering Information Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 SW-118 SPDT RF Switch V2.00 Typical Performance INSERTION LOSS ISOLATION VSWR FREQUENCY MHZ Specifications Subject to Change Without Notice. M/A-COM, Inc. 2 North America: Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020