NSC CLC231A8C

N
Not Intended For New Designs
Comlinear CLC231
Fast Settling, Wideband Buff-Amp™ (Av = ±1 to ±5)
General Description
Features
■
■
■
■
■
165MHz closed-loop – -3dB bandwidth
15ns settling to 0.05%
1mV input offset voltage, 10µV/°C drift
100mA output current
Excellent AC and DC linearity
Applications
■
■
■
■
The CLC231 is constructed using thin film resistor/bipolar transistor technology, and is available in the following versions:
Driving flash A/D converters
Precision line driving
(a gain of 2 cancels matched-line losses)
DAC current-to-voltage conversion
Low-power, high-speed applications
(50mW @ ±5V)
Comlinear CLC231
Fast Settling, Wideband Buff-Amp™ (Av = ±1 to ±5)
August 1996
Bottom View
CLC231AI -25°C to +85°C 12-pin TO-8 can
CLC231A8C -55°C to +125°C 12-pin TO-8 can,
MIL-STD-883, Level B
CLC231AK -55°C to +125°C 12-pin TO-8 can, features burn-in
and hermetic testing
CLC231AM -55°C to +125°C 12-pin TO-8 can, screened to
Comlinear’s M standard for high
reliability
DESC SMD number: 5962-89594
Typical Performance
Package Dimensions
© 1996 National Semiconductor Corporation
Printed in the U.S.A.
http://www.national.com
CLC231 Electrical Characteristics (Av = +2, Vcc = ±15V, RL = 100Ω, Rf = 250Ω; unless specified)
Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are
determined from tested parameters.
Absolute Maximum Ratings
http://www.national.com
2
CLC231 Typical Performance Characteristics
3
(TA = 25°, Av = +2, VCC = ±15V, RL = 100W; unless specified)
http://www.national.com
http://www.national.com
4
This page intentionally left blank.
5
http://www.national.com
Comlinear CLC231
Fast Settling, Wideband Buff-Amp™ (Av = ±1 to ±5)
Customer Design Applications Support
National Semiconductor is committed to design excellence. For sales, literature and technical support, call the
National Semiconductor Customer Response Group at 1-800-272-9959 or fax 1-800-737-7018.
Life Support Policy
National’s products are not authorized for use as critical components in life support devices or systems without the express written approval
of the president of National Semiconductor Corporation. As used herein:
1. Life support devices or systems are devices or systems which, a) are intended for surgical implant into the body, or b) support or
sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its safety or effectiveness.
N
National Semiconductor
Corporation
National Semiconductor
Europe
National Semiconductor
Hong Kong Ltd.
National Semiconductor
Japan Ltd.
1111 West Bardin Road
Arlington, TX 76017
Tel: 1(800) 272-9959
Fax: 1(800) 737-7018
Fax: (+49) 0-180-530 85 86
E-mail: europe.support.nsc.com
Deutsch Tel: (+49) 0-180-530 85 85
English Tel: (+49) 0-180-532 78 32
Francais Tel: (+49) 0-180-532 93 58
Italiano Tel: (+49) 0-180-534 16 80
13th Floor, Straight Block
Ocean Centre, 5 Canton Road
Tsimshatsui, Kowloon
Hong Kong
Tel: (852) 2737-1600
Fax: (852) 2736-9960
Tel: 81-043-299-2309
Fax: 81-043-299-2408
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said
circuitry and specifications.
http://www.national.com
6
Lit #150231-006