1 2 D3PAK 1 - Cathode 2 - Anode Back of Case - Cathode 1 APT30S20S 2 200V 30A HIGH VOLTAGE SCHOTTKY DIODE PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Parallel Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Surface Mount D3PAK • Cooler Operation • Low Forward Voltage • Higher Reliability Systems • High Blocking Voltage • Increased System Power • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) 48 Volt Output Rectifiers High Speed Rectifiers • Low Leakage Current Density L A C I N H C N E T O I E T C MA N A OR V AD INF MAXIMUM RATINGS All Ratings: TC = 25°C unless otherwise specified. Symbol Characteristic / Test Conditions VR Maximum D.C. Reverse Voltage APT30S20S UNIT 200 Volts V RRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 125°C, Duty Cycle = 0.5) 30 IF(RMS) RMS Forward Current (Max. Current Limited by Lead Temperature) TBD Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3mS) TBD IFSM TJ,TSTG TL EAVL Amps -55 to 150 Operating and StorageTemperature Range Lead Temperature: 0.063" from Case for 10 Sec. 300 Avalanche Energy (2A, 15mH) 30 °C mJ STATIC ELECTRICAL CHARACTERISTICS VF Characteristic / Test Conditions Maximum Forward Voltage Maximum Reverse Leakage Current IRM MIN TYP MAX IF = 30A 0.80 0.85 IF = 60A 0.82 UNIT Volts IF = 30A, TJ = 150°C 0.80 VR = VR Rated 0.50 mA 15 VR = VR Rated, TJ = 125°C CT Junction Capacitance, VR = 100V 143 pF LS Series Inductance (Lead to Lead 5mm from Base) 10 nH APT Website - http://www.advancedpower.com 053-6049 Rev A 5-2002 Symbol APT30S20S DYNAMIC CHARACTERISTICS Symbol Characteristic MIN TYP MAX TBD TBD trr1 Reverse Recovery Time, IF = 1.0A, diF /dt = -15A/µs, VR = 30V, TJ = 25°C trr2 Reverse Recovery Time TJ = 25°C 67 trr3 IF = 30A, diF /dt = -100A/µs, VR = 100V TJ = 100°C 95 tfr1 Forward Recovery Time TJ = 25°C TBD tfr2 IF = 30A, diF /dt = 100A/µs, VR = 100V TJ = 100°C TBD IRRM1 Reverse Recovery Current TJ = 25°C 3.7 IRRM2 IF = 30A, diF /dt = -100A/µs, VR = 100V TJ = 100°C 5.5 Qrr1 Recovery Charge TJ = 25°C 142 Qrr2 IF = 30A, diF /dt = -100A/µs, VR = 100V TJ = 100°C 300 Vfr1 Forward Recovery Voltage TJ = 25°C TBD Vfr2 IF = 30A, diF /dt = 100A/µs, VR = 100V TJ = 100°C TBD Rate of Fall of Recovery Current TJ = 25°C TBD IF = 30A, diF /dt = -100A/µs, VR = 100V TJ = 100°C TBD diM/dt UNIT ns Amps L A C I N H C N E T O I E T C MA N A OR V AD INF nC Volts A/µS THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions MIN TYP MAX RθJC Junction-to-Case Thermal Resistance 0.9 RθJA Junction-to-Ambient Thermal Resistance 40 WT °C/W 0.14 oz 3.9 gm Package Weight APT Reserves the right to change, without notice, the specifications and information contained herein. 3 Cathode (Heat Sink) D PAK Package Outline 4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 15.85 (.624) 16.05 (.632) 1.00 (.039) 1.15 (.045) 13.30 (.524) 13.60 (.535) 12.40 (.488) 12.70 (.500) 18.70 (.736) 19.10 (.752) 0.40 (.016) 0.65 (.026) 053-6049 Rev A 5-2002 UNIT 0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114) 1.15 (.045) 1.45 (.057) 1.20 (.047) 1.90 (.075) 1.40 (.055) 2.10 (.083) 2.40 (.094) 2.70 (.106) (Base of Lead) Heat Sink (Cathode) and Leads are Plated 5.45 (.215) BSC (2 Plcs.) Anode Cathode Dimensions in Millimeters (Inches) APT's devices are covered by one or more of the following U.S.patents: 4,895,810 5,256,583 5,045,903 4,748,103 5,089,434 5,283,202 5,182,234 5,231,474 5,019,522 5,434,095 5,262,336 5,528,058