1 3 2 1 - Anode 1 2 - Common Cathode Back of Case - Cathode 3 - Anode 2 APT60S20B2CT 200V 60A 1 3 2 HIGH VOLTAGE SCHOTTKY DIODE PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Parallel Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular T-MAX™ Package • Cooler Operation • Low Forward Voltage • Higher Reliability Systems • High Blocking Voltage • Increased System Power • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) 48 Volt Output Rectifiers High Speed Rectifiers • Low Leakage Current Density L A C I N H C N E T O I E T C MA N A OR V AD INF MAXIMUM RATINGS All Ratings Are Per Diode: TC = 25°C unless otherwise specified. Symbol Characteristic / Test Conditions VR Maximum D.C. Reverse Voltage APT60S20B2CT UNIT 200 Volts V RRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 125°C, Duty Cycle = 0.5) 60 IF(RMS) RMS Forward Current (Max. Current Limited by Lead Temperature) 100 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3mS) TBD IFSM TJ,TSTG TL EAVL Amps -55 to 150 Operating and StorageTemperature Range Lead Temperature: 0.063" from Case for 10 Sec. 300 Avalanche Energy (2A, 30mH) 60 °C mJ STATIC ELECTRICAL CHARACTERISTICS VF Characteristic / Test Conditions Maximum Forward Voltage MIN TYP MAX IF = 60A 0.83 0.90 IF = 120A 0.96 Maximum Reverse Leakage Current Volts 0.80 IF = 60A, TJ = 150°C IRM UNIT VR = VR Rated 1 VR = VR Rated, TJ = 125°C 25 mA CT Junction Capacitance, VR = 100V 285 pF LS Series Inductance (Lead to Lead 5mm from Base) 10 nH APT Website - http://www.advancedpower.com 053-6043 Rev A 5-2002 Symbol APT60S20B2CT DYNAMIC CHARACTERISTICS Symbol Characteristic MIN TYP MAX TBD TBD trr1 Reverse Recovery Time, IF = 1.0A, diF /dt = -15A/µs, VR = 30V, TJ = 25°C trr2 Reverse Recovery Time TJ = 25°C 65 trr3 IF = 60A, diF /dt = -100A/µs, VR = 100V TJ = 100°C 94 tfr1 Forward Recovery Time TJ = 25°C TBD tfr2 IF = 60A, diF /dt = 100A/µs, VR = 100V TJ = 100°C TBD IRRM1 Reverse Recovery Current TJ = 25°C 3.6 IRRM2 IF = 60A, diF /dt = -100A/µs, VR = 100V TJ = 100°C 5.5 Qrr1 Recovery Charge TJ = 25°C 140 Qrr2 IF = 60A, diF /dt = -100A/µs, VR = 100V TJ = 100°C 305 Vfr1 Forward Recovery Voltage TJ = 25°C TBD Vfr2 IF = 60A, diF /dt = 100A/µs, VR = 100V TJ = 100°C TBD Rate of Fall of Recovery Current TJ = 25°C TBD IF = 60A, diF /dt = -100A/µs, VR = 100V TJ = 100°C TBD diM/dt UNIT ns Amps L A C I N H C N E T O I E T C MA N A OR V AD INF nC Volts A/µs THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions MIN TYP MAX RθJC Junction-to-Case Thermal Resistance 0.4 RθJA Junction-to-Ambient Thermal Resistance 40 WT °C/W 0.22 oz 6.1 gm Package Weight APT Reserves the right to change, without notice, the specifications and information contained herein. T-MAXTM (B2) Package Outline 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) 6.15 (.242) BSC Common Cathode 20.80 (.819) 21.46 (.845) 2.87 (.113) 3.12 (.123) 4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 053-6043 Rev A 5-2002 UNIT 1.65 (.065) 2.13 (.084) 19.81 (.780) 20.32 (.800) Anode 1 Common Cathode 1.01 (.040) 1.40 (.055) Anode 2 2.21 (.087) 2.59 (.102) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) APT's devices are covered by one or more of the following U.S.patents: 4,895,810 5,256,583 5,045,903 4,748,103 5,089,434 5,283,202 5,182,234 5,231,474 5,019,522 5,434,095 5,262,336 5,528,058