M ICROCONTROLLERS STK501 EXPANSION BOARD The STK501 board is an expansion module designed to add 64-pin support to the Atmel STK500 Development Board. The STK500 and STK501 expansion module extends support to all current AVR devices. The STK501 includes connectors, jumpers and hardware allowing full support for the new features on the 64-pin devices. The Zero Insertion Force (ZIF) socket allows easy use of TQFP packages. In addition to providing support for new devices, the STK501 also adds support for peripherals previously not supported by the STK500. An additional RS-232 driver and an SRAM interface are among the new features. Devices with dual UART or XRAM interface can thus take advantage of the new resources on the STK501 board. The STKcontaines the following features: • AVR Studio® Software Interface • STK500 Compatible • Supports 64-pin ATmega Devices • Supports ISP and High-voltage Programming • Zero Insertion Force Socket for TQFP Packages • TQFP Footprint for Emulator Adapters • JTAG Connector for On-chip Debugging Using the JTAG ICE • Additional RS-232 Driver and Connector • Adds XRAM support to the STK500 board for Devices with XRAM Interface • On-board 32 kHz Clock Oscillator for Easy RTC Implementations R STK501 R Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 Tel: (408) 441-0311 Fax: (408) 487-2600 Europe Atmel SarL Route des Arsenaux 41 Casa Postale 80 CH-1705 Fribourg Switzerland Tel: (41) 26-426-5555 Fax: (41) 26-426-5500 T HE AVR STK501 E XPANSION B OARD The STK501 board is a hardware expansion module for the STK500 Development Board. The Zero Insertion Force (ZIF) socket on the STK501 adds support for 64pin TQFP devices to the list of devices supported by the STK500. The STK500 now supports all current ATmega, ATtiny and classic AVR devices. The STK500 board provides full programming and development support for all 64pin TQFP devices. Additional ports and interfaces on the STK500 have now been made available with the STK501. Among the new features are: • Port E, F and G headers for the additional ports on the 64-pin ATmega parts • Footprint for mounting an external SRAM on the board directly connected to the SRAM interface of the AVR device • External SRAM interface (including address latch) • Additional RS-232 port for dual UART devices • JTAG Connector for On-chip emulation using the JTAG ICE on supported devices • On-board 32 kHz clock oscillator for easy implementation of real-time clock applications Asia Atmel Asia, Ltd Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East, Kowloon Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369 Japan Atmel Japan K.K. 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581 e-mail [email protected] Web Site http://www.atmel.com ©Atmel Corporation 2001 Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems. Atmel ®, AVR ® and AVR Studio® are registered trademarks of Atmel Corporation. Terms and product names in this document may be trademarks of others. 2474A–09/01/15M The STK501 supports both the In-System Programming mode (ISP) and the Highvoltage Programming mode of its supported devices. AVR Studio, Atmel’s front-end software for the STK500 Development Board, provides support for the STK501 from version 3.50. Ordering Information for the STK501 Expansion Board The STK501 Expansion Board is available from any of Atmel’s franchised distributors. The ordering code is ATSTK501. The latest version of AVR Studio is freely available from http:// www.atmel.com.