D64BP Series Fixed Frequency 2-Pole Pair Filters Band Pass Description: The D64BP Series of small 2-pole-pair fixedfrequency, precision band-pass active filter that provides high performance in a compact 32-pin DIP package, with a broad range of fixed center frequencies (fo) from 1 Hz to 100 kHz. Each filter type features a near theoretical amplitude/phase response along with low output voltage noise enabling these filters to achieve a 10,000:1 or better dynamic signal range. Pretuned to within ±2% of the fixed, user specified center frequency, band-pass D64BP filters pass all frequencies lying between the upper and lower -3dB points of the amplitude response curve. Available Q’s for D64BP models are 1, 2, 5, or 10. Features/Benefits: • Compact 1.8"L x 0.8"W x 0.3"H minimizes board space requirements. • Plug-in ready-to-use, reducing engineering design and manufacturing cycle time. • Factory tuned, no external clocks or adjustments needed • Broad range of center frequencies to meet a wide range of applications. U.S. Selling Price (1-9) Orders for Export Minimum Order Value $150.00 Lead-Time: 2-4 weeks A.R.O. $190.00 ea. U.S. Selling Price + 20% F.O.B. Haverhill, MA Accept Visa, Mcard, Amex Available Band-Pass Models: . . . . . . . . . . . . .Page D64BP2 2 pole pair . . . . . . . . . . . . . . . . . . .2 General Specifications: Ordering Information . . . . . . . . . . . . . . . . . . . . . . .3 Pin-Out/Package Data . . . . . . . . . . . . . . . . . . . . . .3 Applications • Power line interference rejection • Transducer output filtering • Production test instrumentation • Medical electronics equipment and research • Comb filtering and equalization • Noise and harmonic analysis • RMS measurements • Frequency spectrum analysis 1 25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839 e-mail: [email protected] • Web Address: http://www.freqdev.com D64BP Fixed Frequency 2-Pole Pair Filters Band-Pass Model Product Specifications D64BP2 Band-Pass Size 1.8" x 0.8" x 0.3" Range fo 1 Hz to 100 kHz Available "Q’s"1 1, 2, 5, 10 "Q" Accuracy ±10 % Theoretical Transfer Characteristics Appendix A Pages 39 & 40 Pass-Band Gain (non-inverting) 0 ± 0.2 dB typ 0 ± 0.4 dB max. Attenuation Rate 12 dB/octave Center Frequency fo Stability ±0.01%/°C Filter Mounting Assembly FMA-01A ±2% max. 1. Q – Quality Factor for band-pass and band-reject filters. Q = fO/(fH-fL) fO = √ fHfL 2 25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839 e-mail: [email protected] • Web Address: http://www.freqdev.com D64BP Series Pin-Out and Package Data Ordering Information Specification (25°C and Vs ±15Vdc) Linear Operating Range 2 Maximum Current 3 Offset Voltage Offset Temp. Coeff. Power Supply (±V) Rated Voltage Operating Range Maximum Safe Voltage Quiescent Current Pin-Out & Package Data 10 k Ω min. ± 10 Vpeak ±Vs 0.80 Side View 11 Ω typ. 10 Ω max. ±10V ±2 mA 22 mV typ. 20 mV max. 50 µV/°C All dimensions are in inches All case dimensions ± 0.01" 0.025 dia. 1.80 Front View 0.15 (min) ±15 Vdc ±5 to ±18 Vdc ±18 Vdc ±12.5 mA typ. ±20 mA max. 0.80 0.70 OUT -VS OS4 +VS Bottom View GND IN 1.55 1.65 0.00 -20 to +70°C -25 to +85°C 0.45 0.55 0.10 0.00 0.15 Temperature Operating Storage 0.30 1.80 Analog Input Characteristics1 Impedance Voltage Range Max. Safe Voltage Analog Output Characteristics Impedance (Closed Loop) Ordering Information D64BP2/10-849 Hz “Q” 1, 2, 5, 10 (fo) Center Frequency5 e.g., 849 Hz 2.50 kHz 33.3 kHz DC Offset Adjustment + Vs Do not connect if trim is not required. 20 k Ω (Cermet) OS Notes: 1. Input and output signal voltage referenced to supply common. 2. Output is short circuit protected to common. DO NOT CONNECT TO ±Vs. 3. Adjustable to zero. - Vs 4. Units operate with or with out offset pin connected. 5. How to Specify Corner Frequency: Corner frequencies are specified by attaching a three digit frequency designator to the basic model number. Corner frequencies can range from 1 Hz to 100 kHz. We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements, recommendations or suggestions herein in conjunction with our conditions of sale which apply to all goods supplied by us. We assume no responsibility for the use of these statements, recommendations or suggestions, nor do we intend them as a recommendation for any use which would infringe any patent or copyright. IN-D64BP-02 3 25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839 e-mail: [email protected] • Web Address: http://www.freqdev.com